Seismic frame design via inverse mode design of frame-ground systems

A two-step stiffness design procedure is developed for a moment-resisting planar frame supported by a prescribed two-dimensional finite-element ground-pile system. In the first step, a hybrid inverse eigenmode problem is formulated and its solution is derived in an analytical form. A difficulty resulting from the existence of multiple interface nodes is overcome by incorporating a deformation constraint into a set of linear equations for finding the lowest-mode displacements at the interface nodes and in the ground. In the second step, the fundamental natural frequency of the combined system and the lowest mode-strain ratios in the frame specified in the first step are regarded as the parameters for adjusting the mean peak seismic member-end strains to their specified values. If the fundamental natural frequency of the frame with a fixed-base happens to be close to that of the ground, a difficulty arises in the two-step stiffness design procedure because of an irregular response amplification and of the non-predominance of the lowest-mode components. A new practical design procedure of rapid convergence is proposed such that an initial design is found for a stiff ground and that a sequence of stiffness designs is generated with respect to a ground stiffness parameter without any differential coefficient of series expansion. The accuracy of the model utilized in this paper and the validity of the present stiffness design procedure are verified through time-history response analysis.     

地闪回击的微秒级辐射场特征及近地面连接过程分析

利用１μｓ时间分辨率的慢天线电场变化仪在甘肃中川地区雷暴过程中测量得到的大量地闪辐射波形地地闪回击辐射场特征及回击的慢前沿过程进行分析,发现１８次正地闪和８５次负地闪产在周前沿过程上升时间为１９．２μｓ和９．４μｓ,８４次负地闪继后回击的前沿过程为４．３ μｓ。ＹＹ ＵＤＡ Ｏ ３．１μ;     

中国内陆高原正极性雷电的观测实验研究

叙述了１９９７年夏季中日两国科学家在甘肃平凉地区合作进行的有关正极性雷电的综合观测实验情况,包括地布局,所采用的技术手 取得的主要结果。实验中采用人工引发雷电技术并取得了两次成功,其中一次是利用“空中解发”方式,即火箭拖带的细钢丝下端不直接接地,而是通过一段绝缘尼龙线与接地的另一段细钢丝相连。用这种方式可以更真实地再现自然雷电的初始过程。实验中观测到了空中导线两端先导的双向传输现象;电流、电场变化     

1974 activity of chokai volcano,Japan

Shallow intrusion of magma caused phreatic explosions and mud flows at the snow-covered summit of Chokai volcano, northeast Honshu, Japan, after 153 years of dormancy. Total heat emission by the eruption is estimated at more than 3.0 × 10²¹ erg. Equivalent amount of magma is about 2.2 × 10⁸ ton. Focal mechanisms of the associated volcanic earthquakes, which had been variable during the period of eruption. became stable after the cessation of the surface activity with pressure axis in a NW direction which is also the strike of the epicenter distribution. This temporal change of focal mechanisms may be interpreted as the result of propagation of increased pore pressure in the direction of the maximum pressure in the post eruptive period. The magmatic pressure which certainly predominated during the eruption period and caused carthquakes with variable mechanisms, decreased through surface activity.     

Thermal alteration of hydrated minerals during hypervelocity capture to silica aerogel at the flyby speed of Stardust

Abstract— Outside the Earth's atmosphere, silica aerogel is one of the best materials to capture finegrained extraterrestrial particles in impacts at hypervelocities. Because silica aerogel is a superior insulator, captured grains are inevitably influenced by frictional heat. Therefore, we performed laboratory simulations of hypervelocity capture by using light‐gas guns to impact into aerogels finegrained powders of serpentine, cronstedtite, and Murchison CM2 meteorite. The samples were shot at >6 km s^?1 similar to the flyby speed at comet P/Wild‐2 in the Stardust mission. We investigated mineralogical changes of each captured particle by using synchrotron radiation X‐ray diffraction (SR‐XRD), transmission electron microscope (TEM), and field emission scanning electron microscope (FE‐SEM). SR‐XRD of each grain showed that the majority of the bulk grains keep their original mineralogy. In particular, SR‐XRD and TEM investigations clearly exemplified the presence of tochilinite whose decomposition temperature is about 300 °C in the interior of the captured Murchison powder. However, TEM study of these grains also revealed that all the samples experienced melting and vesiculation on the surface. The cronstedtite and the Murchison meteorite powder show remarkable fracturing, disaggregation, melting, and vesiculation. Steep thermal gradients, about 2500 °C/μm were estimated near the surface of the grains (<2 μm thick) by TEM observation. Our data suggests that the interior of >4 μm across residual grains containing abundant materials that inhibit temperature rise would have not experienced >300 °C at the center.     

Heavily fractionated noble gases in an acid residue from the Klein Glacier 98300 EH3 chondrite

Noble gases were measured both in bulk samples (stepped pyrolysis and total extraction) and in a HF/HCl residue (stepped pyrolysis and combustion) from the Klein Glacier (KLE) 98300 EH3 chondrite. Like the bulk meteorite and as seen in previous studies of bulk type 3 E chondrites (“sub-Q”), the acid residue contains elementally fractionated primordial noble gases. As we show here, isotopically these are like those in phase-Q of primitive meteorites, but elementally they are heavily fractionated relative to these. The observed noble gases are different from “normal” Q noble gases also with respect to release patterns, which are similar to those of Ar-rich noble gases in anhydrous carbonaceous chondrites and unequilibrated ordinary chondrites (with also similar isotopic compositions). While we cannot completely rule out a role for parent body processes such as thermal and shock metamorphism (including a later thermal event) in creating the fractionated elemental compositions, parent body processes in general seem not be able to account for the distinct release patterns from those of normal Q noble gases. The fractionated gases may have originated from ion implantation from a nebular plasma as has been suggested for other types of primordial noble gases, including Q, Ar-rich, and ureilite noble gases. With solar starting composition, the corresponding effective electron temperature is about 5000 K. This is lower than inferred for other primordial noble gases (10,000-6000 K). Thus, if ion implantation from a solar composition reservoir was a common process for the acquisition of primordial gas, electron temperatures in the early solar system must have varied spatially or temporally between 10,000 and 5000 K.Neon and xenon isotopic ratios of the residue suggest the presence of presolar silicon carbide and diamond in abundances lower than in the Qingzhen EH3 and Indarch EH4 chondrites. Parent body processes including thermal and shock metamorphism and a late thermal event also cannot be responsible for the low abundances of presolar grains. KLE 98300 may have started out with smaller amounts of presolar grains than Qingzhen and Indarch.     

The Triassic age for oceanic eclogites in the Dabie orogen: Entrainment of oceanic fragments in the continental subduction

Low-temperature and high-pressure eclogites with an oceanic affinity in the western part of the Dabie orogen have been investigated with combined Lu–Hf and U–Pb geochronology. These eclogites formed over a range of temperatures (482–565 °C and 1.9–2.2 GPa). Three eclogites, which were sampled from the Gaoqiao country, yielded Lu–Hf ages of 240.7 ± 1.2 Ma, 243.3 ± 4.1 Ma and 238.3 ± 1.2 Ma, with a corresponding lower-intercept U–Pb zircon age of 232 ± 26 Ma. Despite the well-preserved prograde major- and trace-element zoning in garnets, these Lu–Hf ages mostly reflect the high-pressure eclogite-facies metamorphism instead of representing the early phase of garnet growth due to the occurrence of omphacite inclusions from core to rim and the shell effect. An upper-intercept zircon U–Pb age of 765 ± 24 Ma is defined for the Gaoqiao eclogite, which is consistent with the weighted-mean age of 768 ± 21 Ma for the country gneiss. However, the gneiss has not been subjected to successive high-pressure metamorphism. The new Triassic ages are likely an estimate of the involvement of oceanic fragments in the continental subduction.     

Velocity of finer fragments from impact

We describe the method and the result of a new experiment to obtain velocity distribution of fine ejecta fragments, from a few to a hundred microns in size, produced from basalt targets by impacts of nylon projectiles at a velocity of 3.7 km s⁻¹. The size distribution of holes perforated by the ejecta fragments on thin films and foils placed around the targets was investigated, and the size-velocity relation was determined with the aid of an empirical formula for threshold penetration (McDonnell and Sullivan, Hypervelocity Impacts in Space, Unit for Space Sciences, University of Kent, 1992). The velocity of the fastest fragments, at a given size, is from the extrapolation of the size-velocity relation for 1–100 mm fragments (Nakamura and Fujiwara, Icarus92, 132–146, 1991; Nakamura et al, Icarus100, 127–135, 1992). The laboratory results are also compared with those obtained from the study of secondary craters around large lunar craters (Vickery, Icarus67, 224–236, 1986, Geophys. Res. Lett. 14, 726–729, 1987). All these data provide a smooth size-velocity relationship in the normalized fragment size range of four orders of magnitude.     

Physical parameters identification for full-scale ten-story reinforced concrete building with degrading tri-linear model by modal iterative error correction method

To assess the post-earthquake seismic safety of buildings, it is crucial to predict seismic response, and it is necessary to set the appropriate physical parameters of the response analysis model. Numerous methods have been proposed to identify physical parameters. However, most of them are limited to linear systems, and previous researches on nonlinear systems have difficulties in practical applications. In this paper, a nonlinear response analysis model is identified for a full-scale ten-story reinforced concrete building with the degrading tri-linear stiffness model by the modal iterative error correction (MIEC) method, and the accuracy of this technique is discussed by comparing with the shaking table test.