Sediment Transport in Rivers and Coastal Waters

Following Bagnold's approach, a relationship between sediment transport and energy dissipation is developed. The major assumption made in the study is that the near bed velocity plays a dominant role in the process of sediment transport. A general relationship between energy dissipation and sediment transport is first proposed. Then the equations for total sediment transport are derived by introducing the appropriate expression of energy dissipation rate under different conditions, such as open channel flows, combination of wave and current, as well as longshore sediment transport. Within the flows investigated, the derived relationships are fairly consistent with the available data over a wide range of conditions.     

半潜式超大浮体连接器动力特性的一种时间序列分析方法

根据刚性模块弹性连接器 (RMFC)假设研究由 3个模块连接而成的半潜式超大浮体MobileOffshoreBase(MOB)的波浪载荷动力响应。模块和连接器动力响应根据时间序列法计算 ,这种方法包括海况模拟 ,波浪载荷计算和结构响应计算三个主要部分。通过对结构的适当简化 ,根据Airy波理论 ,Morrison公式以及流体中的结构运动方程、弹性连接器变形方程 ,计算求得MOB在不规则海况下的动力响应 ,并将其与相关文献中的结果进行比较 ,表明该方法有良好的精确性     

不同季节的企鹅珍珠贝游离珠植核效果比较

在雷州流沙港湛江海洋大学珍珠研究室实验基地分别于春、夏和秋季进行了企鹅珍珠贝游离珠植核实验。其中，春季插核的死亡率最低，为15.1％--16．2％，留核率最高，为10％左右：而夏季插核的死亡率最高，为63．56％，留核率也仅为2．22％：秋季插核的留核率最低，仅收珠1颗，留核率为0．35％，死亡率也较高，为54.4％。结果表明，春季是企鹅珍珠贝较适宜的插核季节。     

仿鱼尾潜器推进系统的水动力分析

以开发适用于小型潜器的仿生操纵与推进系统为研究背景 ,对金枪鱼的月牙形尾鳍进行水动力分析。文中将金枪鱼的尾鳍处理为在做横移和摇摆的耦合运动的同时 ,以某一匀速向前运动的月牙形刚性尾翼。计算中应用了双曲面元和压力库塔条件 ,利用面元法计算分析该三维尾翼的非定常水动力性能。探讨了前进速度、横荡和摇首的幅度、频率及其相位差对推进性能的影响     

水面皮层破坏-复原过程的实验室模拟研究

依据水面红外发射和红外遥感测温原理，采用HDG－高灵敏度红外测温仪和常规测量仪器相结合的方法，在实验室空气稳定条件下，模拟测得了水面皮层破坏－复原（重建）的热力过程和气－水温差对水面皮层复原过程的影响，获得了大量的测量数据。数据分析表明，当气－水温差从3．0℃变为11．5℃时，水面皮层破坏可导致皮温增量从气－水温差3．0℃时的0．15℃变到11．5℃时的0．45℃，并发现恢复时间与气－水温差呈负线性关系。     

A new efficient 3D non-hydrostatic free-surface flow model for simulating water wave motions

A new three-dimensional, non-hydrostatic free surface flow model is presented. For simulating water wave motions over uneven bottoms, the model employs an explicit project method on a Cartesian the staggered gird system to solve the complete three-dimensional Navier–Stokes equations. A bi-conjugated gradient method with a pre-conditioning procedure is used to solve the resulting matrix system. The model is capable of resolving non-hydrostatic pressure by incorporating the integral method of the top-layer pressure treatment, and predicting wave propagation and interaction over irregular bottom by including a partial bottom-cell treatment. Four examples of surface wave propagation are used to demonstrate the capability of the model. Using a small of vertical layers (e.g. 2–3 layers), it is shown that the model could effectively and accurately resolve wave shoaling, non-linearity, dispersion, fission, refraction, and diffraction phenomena.     

Wave interaction with a perforated wall breakwater with a submerged horizontal porous plate

This study examines the hydrodynamic performance of a new perforated-wall breakwater. The breakwater consists of a perforated front wall, a solid back wall and a submerged horizontal porous plate installed between them. The horizontal porous plate enhances the stability and wave-absorbing capacity of the structure. An analytical solution based on linear potential theory is developed for the interaction of water waves with the new proposed breakwater. According to the division of the structure, the whole fluid domain is divided into three sub-domains, and the velocity potential in each domain is obtained using the matched eigenfunction method. Then the reflection coefficient and the wave forces and moments on the perforated front wall and the submerged horizontal porous plate are calculated. The numerical results obtained for limiting cases are exactly the same as previous predictions for a perforated-wall breakwater with a submerged horizontal solid plate [Yip, T.L., Chwang, A.T., 2000. Perforated wall breakwater with internal horiontal plate. Journal of Engineering Mechanics ASCE 126 (5), 533–538] and a vertical wall with a submerged horizontal porous plate [Wu, J.H., Wan, Z.P., Fang, Y., 1998. Wave reflection by a vertical wall with a horizontal submerged porous plate. Ocean Engineering 25 (9), 767–779]. Numerical results show that with suitable geometric porosity of the front wall and horizontal plate, the reflection coefficient will be always rather small if the relative wave absorbing chamber width (distance between the front and back walls versus incident wavelength) exceeds a certain small value. In addition, the wave force and moment on the horizontal plate decrease significantly with the increase of the plate porosity.     

Parameterization of Wave Breaking Probability and Whitecap Coverage

1 .Introduction Wave breaking and associated whitecapping have long beeninteresting due totheir close relationto many fields of ocean study,including air-sea interaction,remote sensing,ocean engineering,aswell as wave dynamics .The breaking probabilityBan…     

Three-dimensional numerical simulation of obfique wave action on vertical walls

A three-dimensional numerical model based on the potential theory was developed to study the oblique wave action on vertical walls. A source term inside the domain was used to generate incident waves and outgoing waves were dissipated by sponge layers and transmitted by radiation boundaries. The finite difference method was used to solve the governing equations and boundary conditions in the regular transformed domain in σ-coordinate. Satisfactory agreements between the numerical predictions and experimental results of wave force were obtained. It is concluded that the maximum wave force acting on the vertical walls is induced by the obliquely incident waves rather than the normally incident waves.     

度量泥炭腐殖化度的一种简便方法:泥炭灰度

介绍了一种度量泥炭腐殖化程度简便易得的指标——灰度。通过将同一剖面灰度测量结果与传统的腐殖化度测量结果进行对比，发现二者的变化具有较强的相关性，说明导致二者变化的因素大致相同。泥炭赋色物质鉴定的实验表明腐殖质含量变化是引起灰度在剖面上变化的原因，从而进一步论证了用灰度值作为泥炭腐殖化程度指标的可行性。