Occurrence and characteristics of sporadic sodium layer observed by lidar at a mid-latitude location

Na lidar observations of SSL during the past 5 years at a mid-latitude location (Wuhan, China, 31°N, 114°E) are reported in this paper. From 26 SSL events detected in about 230 h of observation, an SSL occurrence rate of 1 event/9 h at our location was obtained. This result, combined with that reported by Nagasawa and Abo (Geophys. Res. Lett. 22 (1995) 263) at Tokyo, Japan, reveals that the SSL occurrence can be relatively frequent at some mid-latitude locations. The statistical analyses of main parameters for the 26 SSL events were made, and the results were compared with those previously reported. By examining the corresponding data from a nearby ionosonde, it was found that there was a fairly good correlation between SSL and Es. Of the 18 pairs of SSL and Es events checked, 15 of SSL were accompanied by Es, and 8 pairs of them were correlated within 1 h in time and within 5 km in altitude. From the analyses of observed perturbations during SSL development, the role of dynamic processes of atmosphere in the SSL formations were emphasized.     

Finite element analysis for a finite conductivity fracture in an infinite poroelastic medium

In the technology of oil recovery, oil production rate can be increased by generation of a vertical conductive fracture adjacent to the well-bore. In this paper the seepage flow and isothermal deformation in both the oil formation and the fracture are studied by modelling the formation as a two-dimensional infinite poroelastic medium and the conductive fracture as a one-dimensional poroelastic material, saturated by a one-phase compressible fluid. The plane strain condition is employed. Solutions for a growing conductive fracture and a stationary conductive fracture in the infinite medium are obtained by means of the finite element method based on a variational principle for the formation which can impose the governing equations of the fracture. Infinite elements are used outside the finite element domain. Numerical results indicate that the injection rate, the applied pressure and the crack mouth opening displacement at the well-bore oscillate during the propagation of the conductive fracture. The production rate of a well with the conductive fracture is compared with that of a well without the conductive fracture. Finally, a new definition of the conductivity coefficient for the conductive fracture is presented. Copyright © 1999 John Wiley & Sons, Ltd.     

On the sampling of airborne measurements of radiative properties of cloud fields: Results from International Cirrus Experiment (ICE), 1987

Summary During the first pilot phase of the International Cirrus Experiment (ICE) in September/October 1987 radiation measurements were carried out above and below broken cloud fields over the German Bight. Analyses of the measurements of 25.9.1987 (broken cumulus cloud field) showed an unexpected high absorption of solar radiation but not those of 28.9.1987 (stratocumulus/stratus cloud field). This might be explained by a partial negligence of cloud side factor under the viewing geometry of the pyranometer and other reasons. The light guide effect (leakage) within holes can account for the depletion of cloud reflectance and the enhancement of cloud transmittance at large cloud cover, as observed during the measurements on 28.9.1987. The fluctuation of the irradiances, which can be characterized by the intermittency parameter, has been related to the corresponding cloud cover by a regression equation. On the condition of similarity, this scaling parameter derived from sample measurements could be extrapolated to that of the whole cloud field. Thus, the estimation of the irradiance spectrum for the whole cloud field may be possible, from samples taken with aircraft and imaging data.With 5 Figures     

Rock physics template (RPT) analysis of well logs and seismic data for lithology and fluid classification in Cambay Basin

The Cambay Basin is 450-km-long north–south-trending graben with an average width of 50 km, having maximum depth of about 7 km. The origin of the Cambay and other Basins on the western margin of India are related to the break up of the Gondwana super-continent in the Late-Triassic to Early-Jurassic (215 ma). The structural disposition of the Pre-Cambrian basement—a complex of igneous and metamorphic rocks exposed in the vicinity of the Cambay Basin—controls its architecture. The principal lineaments in the Basin are aligned towards NE-SE, ENE-WSW and NNW-SSE, respectively. Rock physics templates (RPTs) are charts and graphs generated by using rock physics models, constrained by local geology, that serve as tools for lithology and fluid differentiation. RPT can act as a powerful tool in validating hydrocarbon anomalies in undrilled areas and assist in seismic interpretation and prospect evaluation. However, the success of RPT analysis depends on the availability of the local geological information and the use of the proper model. RPT analysis has been performed on well logs and seismic data of a particular study area in mid Cambay Basin. Rock physics diagnostic approach is adopted in the study area placed at mid Cambay Basin to estimate the volume in the reservoir sands from 6 wells (namely; A, B, C, D, E and F) where oil was already encountered in one well, D. In the study area, hydrocarbon prospective zone has been marked through compressional (P wave) and shear wave (S wave) impedance only. In the RPT analysis, we have plotted different kinds of graphical responses of Lame’s parameters, which are the function of P-wave velocity, S-wave velocity and density. The discrete thin sand reservoirs have been delineated through the RPT analysis. The reservoir pay sand thickness map of the study area has also been derived from RPT analysis and fluid characterization. Through this fluid characterization, oil-bearing thin sand layers have been found in well E including well D. The sand distribution results prove that this methodology has able to perform reservoir characterization and seismic data interpretation more quantitatively and efficiently.     

SHRIMP zircon dating and Nd isotopic systematics of Palaeoproterozoic migmatitic orthogneisses in the Epupa Metamorphic Complex of northwestern Namibia

The Epupa Metamorphic Complex constitutes the southwestern margin of the Congo Craton and is exposed in a hilly to mountainous terrain of northwestern Namibia, bordering the Kunene River and extending into southern Angola. It consists predominantly of granitoid gneisses which are migmatized over large areas. This migmatization locally led to anatexis and produced crustal-melt granites such as the Otjitanda Granite. We have undertaken reconnaissance geochemical studies and single zircon U–Pb SHRIMP and Pb–Pb evaporation dating of rocks of the Epupa Complex. The granitoid gneisses, migmatites and anatectic melts are similar in composition and constitute a suite of metaluminous to peraluminous, calc-alkaline granitoids, predominantly with volcanic arc geochemical signatures. The zircon protolith ages for the orthogneisses range from 1861 ± 3 to 1758 ± 3 Ma. Anatexis in the migmatitic Epupa gneisses was dated from a melt patch at 1762 ± 4 Ma, and the anatectic Otjitanda Granite has a zircon age of 1757 ± 4 Ma. Migmatization and anatexis therefore occurred almost immediately after granitoid emplacement and date a widespread high-temperature Palaeoproterozoic event at ∼1760 Ma which has not been recorded elswhere in northern Namibia. The Nd isotopic systematics of all dated samples are surprisingly similar and suggest formation of the protolith from a source region that probably separated from the depleted mantle about 2.4–2.0 Ga ago. A major Archaean component in the source area is unlikely.     

Site effect on vulnerability of high-rise shear wall buildings under near and far field earthquakes

Worldwide experience repeatedly shows that damages in structures caused by earthquakes are highly dependent on site condition and epicentral distance. In this paper, a 21-storey shear wall-structure built in the 1960s in Hong Kong is selected as an example to investigate these two effects. Under various design earthquake intensities and for various site conditions, the fragility curves or damage probability matrix of such building is quantified in terms of the ductility factor, which is estimated from the ratio of storey yield shear to the inter-storey seismic shear. For high-rise buildings, a higher probability of damage is obtained for a softer site condition, and damage is more severe for far field earthquakes than for near field earthquakes. For earthquake intensity of VIII, the probability of complete collapse (P) increases from 1 to 24% for near field earthquakes and from 1 to 41% for far field earthquakes if the building is moved form a rock site to a site consisting a 80 m thick soft clay. For intensity IX, P increases from 6 to 69% for near field earthquake and from 14 to 79% for far field earthquake if the building is again moved form rock site to soft soil site. Therefore, site effect is very important and not to be neglected. Similar site and epicentral effects should also be expected for other types of high-rise structures.     

Measurement of stress effects (scope for growth) and contaminant levels in mussels (Mytilus edulis) collected from the Irish Sea

The objective of this research was to quantify the impact of pollution along the coastlines of the Irish Sea. Pollution assessment was based on the combined measurement of scope for growth (SFG), and chemical contaminants in the tissues of mussels (Mytilus edulis) collected from 38 coastal sites around the Irish Sea during June-July in 1996 and 1997. On the UK mainland coast, the SFG showed a general trend with a significant decline in water quality in the Liverpool and Morecambe Bay region. High water quality was recorded along the west coast of Wales, as well as southwest England and northwest Scotland (clean reference sites outside the Irish Sea). Along the coast of Ireland there was a similar trend with reduced SFG within the Irish Sea region. SFG was generally low north of Duncannon and then improved north of Belfast. The poor water quality on both sides of the Irish Sea is consistent with the prevailing hydrodynamics and the spatial distribution of contaminants associated with urban/ industrial development. The decline in SFG of mussels on both sides of the Irish Sea was associated with a general increase in contaminant levels in the mussels. Certain contaminants, including PAHs, TBT, sigmaDDT, Dieldrin, gamma-HCH, PCBs, and a few of the metals (Cd, Se, Ag, Pb), showed elevated concentrations. Many of these contaminants were particularly elevated in the coastal margins of Liverpool Bay, Morecambe Bay and Dublin Bay. A quantitative toxicological interpretation (QTI) of the combined tissue residue chemistry and SFG measurements indicated that at the majority of coastal sites, c. 50 to > 80% of the observed decline in SFG was due to PAHs as a result of fossil fuel combustion and oil spills. TBT levels were highest at major ports and harbours, but these concentrations only made a minor contribution to the overall reduction in SFG. At no sites were individual metals accumulated to concentrations that could cause a significant effect on SFG. The study identified many sites where the observed reduction in SFG was far greater than predicted from the limited number of chemical contaminants analysed, thus indicating the presence of additional 'unknown toxicants'. Sewage (containing domestic, agricultural and industrial components) appears to be an important contributor to reduced SFG and linear alkylbenzenes (LABs) and As may provide suitable 'sewage markers'. There was a highly significant positive correlation between SFG and As (P < 0.001). This relationship may be due to reduced As uptake by algal food material and mussels at sites with elevated P04 concentrations (e.g. at sites with sewage inputs). Phosphate is a known competitive inhibitor of As accumulation, at least in algae. The results highlight that further research is required on 'sewage markers' in mussels. The SFG approach therefore provides a rapid, cost-effective and quantitative measure of pollution impact, as well as a means of identifying the causes through a QTI of tissue contaminants levels. It also serves to identify the presence of unidentified toxicants and areas that require further study.     

Selection of hazardous waste dumpsites based on parameters effecting soil adsorption capacity – a case study

A careful selection of waste dumpsites, particularly hazardous ones, is very important for sustainable water resources management. Several laboratory experiments were carried out on the field samples to study adsorption capacity using p-dichlorobenzene (a solvent used in various industrial processes) as the test contaminant. The effect of parameters such as organic matter, clay, and iron and aluminium oxides, which are known to influence the soil adsorption capacity, are studied in the present work. Several soil samples from the Patancheru Industrial Area (Hyderabad, India) were collected and characterized. Only three soils, which had a comparatively high percentage of organic matter, clay, iron and aluminium oxide contents were used for the adsorption studies. The results clearly indicated a decrease in the adsorption capacity of the soils by as much as 75% when organic matter was removed. The other parameters such as clay and iron and aluminium oxides also play an important role in adsorption (57 and 39.8% reduction respectively). It was observed that out of the selected factors organic matter in the soils has the maximum effect regarding the adsorption of p-dichlorobenzene. Since the selected soils contain comparatively more organic matter, clay and iron and aluminium oxides in the selected industrial area, these can be used as sites for dumping hazardous waste, which can be further treated by methods like bioremediation.     

Nd and Sr isotopic constraints on the origin of igneous rocks resulting from the opening of the Japan Sea, southwestern Japan

Strontium and Nd isotopic compositions and trace element abundances were determined for Cretaceous to late Cenozoic igneous rocks from the Japan Sea side of Southwest Japan in order to investigate the effect of the opening of the Japan Sea on igneous activity. The ⁸⁷Sr/⁸⁶Sr ratios for both high and low silica rocks decrease with decreasing age since the middle Miocene, when the opening occurred. Similarly, ¹⁴³Nd/¹⁴⁴Nd values for these rocks increase with decreasing age, and are negatively correlated with ⁸⁷Sr/⁸⁶Sr ratios. A two-component mixing process can best account for these isotopic and chemical characteristics. One end-member is likely the subcontinental lithospheric mantle (SCLM) and its derivative mafic to intermediate materials which had ɛ_Nd values of around +3. The other endmember consists of mafic to intermediate rocks with low ɛ_Nd values (e.g., −8), probably located in the lower crust. The mantle upwelling associated with the opening of the Japan Sea did not supply typical MORB or MORB-source materials to the crust, but did provide the heat that caused the melting of lithospheric mantle and lower crust. Received: 29 August 1996 / Accepted: 6 May 1997