华北东部地幔改造作用和置换作用:单斜辉石激光探针研究

对山东蒙阴古生代金伯利岩中石榴石方辉橄榄岩、河南鹤壁新生代玄武岩中 铬尖晶石方辉橄榄岩、山东栖霞新生代玄武岩中央晶石二辉橄榄岩和山东山旺新生代 玄武岩中尖晶石（富ＣｐＸ）二辉橄榄岩单斜辉石的常量、微量元素的研究和对比表明：华 北地块古生代稳定存在的克拉通岩石圈地幔在中、新生代其东部被具大洋地幔性质的 显生宙地幔不均匀地发生了置换作用,残存于南北重力梯度带（岩石圈减薄过渡带）上 的鹤壁浅部克拉通地幔除保存有置换作用前改造作用的丰富信息外,也包含有其深部 被置换后的地幔改造作用信息;郯庐断裂带东部栖霞的新生地幔仍保留有较多的大洋 地幔成分特征,而郯庐断裂带内山旺的新生地幔受后续地幔改造作用的影响有向大陆 地幔演化的趋向．发生于华北地块东部中、新生代的岩石圈巨厚减薄作用与地幔的置换 作用有关,由渐进的富ＣＯ_２流体或碳酸岩熔体对岩石圈地幔的交代改造作用以及由此 所引起的熔体抽取作用是完成新生地幔对古老地幔置换作用的关键．郯庐断裂带等岩 石圈深大断裂为地幔改造作用和地幔置换作用提供了良好的通道作用．     

人工侧向冻结条件下土的冻结试验

在人工侧向冻结、正弦和恒温2种冻结温度、开放和封闭条件下,对含水率为32 %的重塑粉质黏土进行了4组冻结试验。结果表明,补水条件相同时侧向正弦冻结试样的冻结速度比封闭正弦冻结试验的缓慢,当其冻结状态进入稳态之后,试样的整体温度场随着侧向冻结温度的正弦变化而出现相应的波动,但径向各段的温度梯度的相位滞后于正弦温度相位半个周期;正弦冻结试样与恒温冻结试样在同一条件下的冻胀量相近,封闭体系下自上而下轴向冻结试样的冻胀量高于同条件下侧向冻结试样的冻胀量;人工冻结工程中应考虑大气环境温度变化（如昼夜温差）及冷能侧向输入土体内时对冻土温度场的变化的影响。     

The temple of apollo (Delphi) strengthens novel thermoluminescence dating method

The temple of Apollo in Delphi (Greece), built in 550 B.C., has been used to reconfirm a novel method of dating carved megalithic stone buildings using thermoluminescence (TL) (Liritzis, 1994). A calcitic (marble) sample was taken from the western side of the well-known inscribed polygonal wall, which constitutes the southern external support foundations of the temple. A partially bleached TL methodology was devised to determine first the ancient residual TL and then the correct archaeological dose. The obtained TL age of 420 ± 300 B.C. is compatible, within the margin of error, with the archaeological age. © 1997 John Wiley & Sons, Inc.     

西天山喇嘛苏铜矿成矿斑岩的岩石学、地球化学特征及成因探讨

位于西天山别珍套-科古琴晚古生代岛弧西段的喇嘛苏铜矿床是区内最大的铜矿床,与成矿作用有着密切关系的斑岩体为英云闪长斑岩、花岗闪长斑岩,是同源岩浆分异演化的产物,且花岗闪长斑岩可能属于岩浆演化晚期的产物。本区成矿斑岩的主量、微量元素和Sr-Nd同位素地球化学特征表明,其富集大离子亲石元素,而相对亏损高场强元素,出现了较为明显的Ta、Nb负异常,初始锶同位素ISr和εNd(t=390Ma)值分别为0.7072～0.7076和-0.32～0.17,显示壳幔混合源的特征,利用Sr和Nd同位素估算其源区物质约有50%来源于地壳。岩石地球化学特征指示了其为典型钙碱性火山弧花岗岩,暗示其形成于大陆弧环境。结合区域地质背景,推测本区成矿斑岩是在洋壳俯冲作用下发生部分熔融,交代原先的地幔楔,并混合了部分下地壳的物质,经历分离结晶作用的产物,其形成可能与晚古生代准噶尔洋板块向南的俯冲作用有关。结合东西天山的成矿斑岩的地球化学特征对比研究,岩浆源区的差别可能导致不同类型斑岩型矿床的形成,斑岩型铜矿床的形成较斑岩型钼矿床可能有更少的地壳物质贡献。     

Analytical solutions of the diffraction problem of a group of truncated vertical cylinders

An exact analytical method is described to solve the diffraction problem of a group of truncated vertical cylinders. In order to account for the interaction between the cylinders, Kagemoto and Yue's exact algebraic method is utilised. The isolated cylinder diffraction potential due to incident waves is obtained using Garret's solution and evanescent mode solutions are derived in a similar manner.Numerical results are presented for arrays of two and four cylinders. Comparisons between the results obtained from the method presented here and those obtained from numerical methods show excellent agreement.     

Occurrence and characteristics of sporadic sodium layer observed by lidar at a mid-latitude location

Na lidar observations of SSL during the past 5 years at a mid-latitude location (Wuhan, China, 31°N, 114°E) are reported in this paper. From 26 SSL events detected in about 230 h of observation, an SSL occurrence rate of 1 event/9 h at our location was obtained. This result, combined with that reported by Nagasawa and Abo (Geophys. Res. Lett. 22 (1995) 263) at Tokyo, Japan, reveals that the SSL occurrence can be relatively frequent at some mid-latitude locations. The statistical analyses of main parameters for the 26 SSL events were made, and the results were compared with those previously reported. By examining the corresponding data from a nearby ionosonde, it was found that there was a fairly good correlation between SSL and Es. Of the 18 pairs of SSL and Es events checked, 15 of SSL were accompanied by Es, and 8 pairs of them were correlated within 1 h in time and within 5 km in altitude. From the analyses of observed perturbations during SSL development, the role of dynamic processes of atmosphere in the SSL formations were emphasized.     

Coastal sea level variability in the US West Coast Ocean Forecast System (WCOFS)

Sea level variability along the US West Coast is analyzed using multi-year time series records from tide gauges and a high-resolution regional ocean model, the base of the West Coast Ocean Forecast System (WCOFS). One of the metrics utilized is the frequency of occurrences when model prediction is within 0.15 m from the observed sea level, F. A target level of F?=?90% is set by an operational agency. A combination of the tidal sea level from a shallow water inverse model, inverted barometer (IB) term computed using surface air pressure from a mesoscale atmospheric model, and low-pass filtered sea level from WCOFS representing the effect of coastal ocean dynamics (DYN) provides the most straightforward approach to reaching levels F>80%. The IB and DYN components each add between 5 and 15% to F. Given the importance of the DYN term bringing F closer to the operational requirement and its role as an indicator of the coastal ocean processes on scales from days to interannual, additional verification of the WCOFS subtidal sea level is provided in terms of the model-data correlation, standard deviation of the band-pass filtered (2–60 days) time series, the annual cycle amplitude, and alongshore sea level coherence in the range of 5–120-day periods. Model-data correlation in sea level increases from south to north along the US coast. The rms amplitude of model sea level variability in the 2–60-day band and its annual amplitude are weaker than observed north of 42 N, in the Pacific Northwest (PNW) coast region. The alongshore coherence amplitude and phase patterns are similar in the model and observations. Availability of the multi-year model solution allows computation and analysis of spatial maps of the coherence amplitude. For a reference location in the Southern California Bight, relatively short-period sea level motions (near 10 days) are incoherent with those north of the Santa Barbara Channel (in part, due to coastal trapped wave scattering and/or dissipation). At a range of periods around 60 days, the coastal sea level in Southern California is coherent with the sea surface height (SSH) variability over the shelf break in Oregon, Washington, and British Columbia, more than with the coastal SSH at the same latitudes.     

Finite element analysis for a finite conductivity fracture in an infinite poroelastic medium

In the technology of oil recovery, oil production rate can be increased by generation of a vertical conductive fracture adjacent to the well-bore. In this paper the seepage flow and isothermal deformation in both the oil formation and the fracture are studied by modelling the formation as a two-dimensional infinite poroelastic medium and the conductive fracture as a one-dimensional poroelastic material, saturated by a one-phase compressible fluid. The plane strain condition is employed. Solutions for a growing conductive fracture and a stationary conductive fracture in the infinite medium are obtained by means of the finite element method based on a variational principle for the formation which can impose the governing equations of the fracture. Infinite elements are used outside the finite element domain. Numerical results indicate that the injection rate, the applied pressure and the crack mouth opening displacement at the well-bore oscillate during the propagation of the conductive fracture. The production rate of a well with the conductive fracture is compared with that of a well without the conductive fracture. Finally, a new definition of the conductivity coefficient for the conductive fracture is presented. Copyright © 1999 John Wiley & Sons, Ltd.     

On the sampling of airborne measurements of radiative properties of cloud fields: Results from International Cirrus Experiment (ICE), 1987

Summary During the first pilot phase of the International Cirrus Experiment (ICE) in September/October 1987 radiation measurements were carried out above and below broken cloud fields over the German Bight. Analyses of the measurements of 25.9.1987 (broken cumulus cloud field) showed an unexpected high absorption of solar radiation but not those of 28.9.1987 (stratocumulus/stratus cloud field). This might be explained by a partial negligence of cloud side factor under the viewing geometry of the pyranometer and other reasons. The light guide effect (leakage) within holes can account for the depletion of cloud reflectance and the enhancement of cloud transmittance at large cloud cover, as observed during the measurements on 28.9.1987. The fluctuation of the irradiances, which can be characterized by the intermittency parameter, has been related to the corresponding cloud cover by a regression equation. On the condition of similarity, this scaling parameter derived from sample measurements could be extrapolated to that of the whole cloud field. Thus, the estimation of the irradiance spectrum for the whole cloud field may be possible, from samples taken with aircraft and imaging data.With 5 Figures     

An examination of the validation of a model of the hydro/thermo/mechanical behaviour of engineered clay barriers

This paper focuses attention on the development of a numerical model of the hydro/thermo/mechanical behaviour of unsaturated clay and its consequent verification and validation. The work presented describes on-going collaboration between the Cardiff School of Engineering and Atomic Energy of Canada. The model development, which was carried out at Cardiff, can be described as being based on a mechanistic approach to coupled heat, moisture and air flow. This is then linked to a deformation analysis of the material within a ‘consolidation’ type of model. The whole is solved via the finite element method to yield a computer software code named COMPASS (COde for Modelling PArtly Saturated Soil). Some aspects of verification and validation of the model have been addressed in-house. However, the purpose of current AECL work is to provide an independent, rigorous, structured programme of validation and the paper will also explore the further validation of COMPASS within this context. © 1998 by John Wiley & Sons, Ltd.