Refined modeling and movement characteristics analyses of irregularly shaped particles

Irregularly shaped (IRS) particles widely exist in many engineering and industrial fields. The macro physical and mechanical properties of the particle system are governed by the interaction between the particles in the system. The interaction between IRS particles is more complicated because of their complex geometric shape with extremely irregular and co‐existed concave and convex surfaces. These particles may interlock each other, making the sliding and friction of IRS particles more complex than that of particles with regular shape. In order to study the interaction of IRS particles more efficiently, a refined method of constructing discrete element model based on computed tomography scanning of IRS particles is proposed. Three parameters were introduced to control the accuracy and the number of packing spheres. Subsequently, the inertia tensor of the IRS particle model was optimized. Finally, laboratory and numerical open bottom cylinder tests were carried out to verify the refined modeling method. The influence of particle shape, particle position, and mesoscopic friction coefficient on the interaction of particles was also simulated. It is noteworthy that with the increase of mesoscopic friction coefficient, the fluidity of IRS particle assembly decreases, and intermittent limit equilibrium state may appear. Copyright © 2014 John Wiley & Sons, Ltd.     

Determination of Bromine and Iodine in Twenty-three Geochemical Reference Materials by ICP-MS

Trace amounts (from nanogram to microgram levels) of bromine and iodine were determined by inductively coupled plasma-mass spectrometry (ICP-MS) in twenty-three geochemical reference materials issued by the GSJ, USGS, IAEA etc. The pyrohydrolysis technique was used to separate bromine and iodine from samples analysed in the form of powder. The accuracy and precision of the experimental values were assessed by the comparative analysis of well established reference materials such as USGS AGV-1, BCR-1 and IGGE GBW07312. The measured values agreed well with reported values within a 10% error range. We also report reliable new data for these elements in these geochemical reference materials.     

Trace elements in organic- and iron-rich surficial fluids of the boreal zone: Assessing colloidal forms via dialysis and ultrafiltration

On-site size fractionation of about 40 major and trace elements (TE) was performed on waters from boreal small rivers and their estuaries in the Karelia region of North-West Russia around the “Vetreny Belt” mountain range and in Paanajärvi National Park (Northern Karelia). Samples were filtered in the field using a progressively decreasing pore size (5 μm, 2.5 (3) μm, 0.22 (0.45) μm, 100 kDa, 10 and 1 kDa) by means of frontal filtration and ultrafiltration (UF) techniques and employing in-situ dialysis with 10 and 1 kDa membranes followed by ICP-MS analysis. For most samples, dialysis yields a systematically higher (factor of 2-3) proportion of colloidal forms compared to UF. Nevertheless, dialysis is able to provide a fast and artefact-free in-situ separation of colloidal and dissolved components.Similar to previous studies in European subarctic zones, poor correlation of iron concentration with that of organic carbon (OC) in (ultra)filtrates and dialysates reflect the presence of two pools of colloids composed of organic-rich and Fe-rich particles. All major anions and silica are present as dissolved species (or solutes) passing through the 1-kDa membrane. Size-separation ultrafiltration experiments show the existence of larger or smaller pools of colloidal particles different for each of the considered elements.The effect of rock lithology (acidic versus basic) on the colloidal speciation of TE is seen solely in the increase of Fe and some accompanying TE concentrations in catchment areas dominated by basic rocks compared to granitic catchments. Neither the ultrafiltration pattern nor the relative proportions of colloidal versus truly dissolved TE are affected by the lithology of the underlying rocks: within ±10% uncertainty, the two colloidal (10 kDa-0.22 μm and 1-10 kDa) and the truly dissolved (<1 kDa) pools show no difference in percentage of TE distribution between two types of bedrock lithology. The same conclusion is held for organic- and Fe-rich waters. In contrast, landscape context analysis demonstrated slight dominance, for most TE affected by UF, of large-size colloids (10 kDa-0.22 μm) in rivers and streams and small-size colloids and truly dissolved fractions in swamp stagnant surface waters. This supports the existence of two pathways of colloids formation: during the plant litter degradation in wetland zones and at the redox front in river riparian zone.     

A synthesis of morphological evolutions and Holocene stratigraphy of a wave-dominated estuary: The Arcachon lagoon,SW France

This work presents the first synthesis of secular to millenary morphological evolutions and stratigraphy of a wave-dominated estuary, the Arcachon lagoon, from a combination of unpublished bathymetric maps (1865 and 2001), core results and high-resolution seismic profiles recorded for the first time in this lagoon. The Arcachon lagoon is located on the Atlantic coast of France, facing the wave-dominated shelf of the Bay of Biscay. It is a mesotidal semi-enclosed environment of about 160 km².The sediment budget of the Arcachon lagoon was computed by subtracting the 1865 bathymetric map from that of 2001. The computed volume difference is low (?9.9±35×10⁶ m³ in 136 yrs) and is the result of the balance between erosion and accretion that occurs within tidal channels and tidal flats, respectively. This morphological evolution pattern is explained by low sediment supply and also by the tidal distortion resulting from the morphology of the lagoon. Deep channels connected to the inlet are dominated by ebb currents inducing erosion. Tidal flats and transverse channels display weak or flood-dominated tidal currents leading to the deposition of silts. The areas of tidal flat siltation locally correlate with the presence of oyster farms, suggesting the influence of Man on the lagoon sediment-fill. Transverse channel-infill is related to weak tidal currents resulting from the hydraulically inefficient orientation of these channels which served as an ancient drainage network.Evidence for tidal channel-infill and channel abandonment are also provided by seismic profiling and cores. The upper stratigraphic succession of the lagoon (about 10 m thick) includes four main stratigraphic units dominated by channel-fills. The two lower units (around 7500–2800 yrs BP) display tabular-shape sandy channels interpreted to be records of the open estuarine phase of the Arcachon lagoon. The two upper units (around 2800 yrs BP to present-day) display U-shaped mixed sand-and-mud channel-fills interpreted to be records of the closure of the lagoon. Given that the basal estuarine units are transgressive and the upper lagoonal units are regressive, the main stratigraphic change at around 2800 yrs BP is interpreted as being the maximum flooding surface (MFS). This late MFS is explained by the low sediment supply. It is proposed that the transition from the estuarine to the lagoonal phase is related to the development of the Cap-Ferret spit in response to an increase in the ratio between wave power to tide power. This change in wave-to-tide ratio may be triggered by wave power increase following the Subboreal/Subatlantic climate instability or a decrease in tide power following a decrease in tidal prism related to the lagoon sediment-fill.Thus, the evolution of the Arcachon lagoon over the last millenaries was mainly controlled by its spit development, leading to a wave-dominated estuary in terms of its geomorphology. Once it was partially closed, extensive mud flats developed in the lagoon which became ebb-dominated.     

Impact of wildfire on source water contributions in Devil Creek,CA: evidence from end‐member mixing analysis

A geochemical and end‐member mixing analysis (EMMA) is undertaken in Devil Canyon catchment, located in southern California, to further understanding of watershed behaviour and source water contributions after an acute and extensive wildfire. Physical and chemical transformations in post‐fire watersheds are known to increase overland flow and decrease infiltration, mainly due to formation of a hydrophobic layer at, or near, the soil surface. However, less is known about subsurface flow response in burned watersheds. The current study incorporates EMMA to evaluate and quantify source water contributions before, and after, a catchment affected by wildfires in southern California during the fall of 2003. Pre‐ and post‐fire stream water data were available at several sampling sites within the catchment, allowing the identification of contributing water sources at varying spatial scales. Proposed end‐member observations (groundwater, overland flow, shallow subsurface flow) were also collected to constrain and develop the catchment mixing model. Post‐fire source water changes are more evident in the smaller and faster responding sub‐basin (interior sampling point). Early post‐fire storm events are dominated by overland flow with no significant soil water or groundwater flow contribution. Inter‐storm streamwater in this smaller basin shows an increase in groundwater and a decrease in soil water. In the larger, baseflow‐dominated system, source water components appear less affected by fire. A slight increase in lateral flow is observed with only a slight decrease in baseflow. Changes in the post‐fire flow regimes affect nutrient loading and chemical response of the basin. Relatively rapid recovery of the chaparral ecosystem is evidenced, with active re‐growth and evapotranspiration evidenced by the fourth post‐fire rainy season. Copyright © 2008 John Wiley & Sons, Ltd.     

Sediment budget of the Napo River,Amazon basin,Ecuador and Peru

The upstream‐downstream sediment budget along the Napo River (100 520 km², 6300 m³ s^?1) was studied in the Andean foothills of Ecuador, at the west of the Amazon basin. A comparative study was made during four hydrological cycles (2001–2005) for three hydrological stations located upstream, and during one hydrological cycle (2004–2005) for the fourth one located near the mouth of the Napo River (region of Iquitos in Peru). This analysis showed an unusual increase in the concentration of suspended sediment recorded for the western part of the Amazon plain. Like the runoff (81 l s^?1 km²), which is a world's maximum, the erosion rate (1160 t km^?2 year^?1, i.e. 47% of total suspended solid (TSS) export at the exit of Ecuador), one of the highest for a floodplain basin is the result of a stepper slope than in the rest of the Andean foothills, where typically sedimentation phenomena are predominant, and can be explained in part by a greater tectonic activity. Similar phenomenes were evidenced in small mountainous rivers in New Guinea (Milliman and Syvitski, 1992; Milliman, 1995). On the headwaters of the Napo River drainage basin, the tectonic uplift causes the Pastaza Megafan's existence. This progressively diverts the course of Napo River towards north and also provokes the remobilization of fine fluvial deposits. Moreover, this geodynamic trend is completed by the impact of volcanic eruption, earthquakes and landslides. The combination of these phenomena, so common in the region, has provided a large sediment transfer, not only at present but also in the past, as can be confirmed by the presence of incised terraces, mainly formed by volcanic materials. Then, these results were compared with a similar study carried out further south in the Madeira basin at the Bolivian foothills. These studies show the spatio‐temporal variability of the relation between sediment transfer and geodynamic processes at the Andean Piedmont. Copyright © 2009 John Wiley & Sons, Ltd.     

Streambank dewatering for increased stability

Streambank erosion is often the dominant source of sediment leaving modified watersheds. Mass failure of high, steep banks is one of the most serious forms of streambank erosion. The risk of a given bank experiencing mass failure is a function of bank height, angle, and soil strength, which is governed by soil moisture. Two methods for bank dewatering were tested in adjacent sections of streambank bordering a deeply incised channel in northern Mississippi: a low‐cost pump system and subsurface horizontal drains. Pore water pressures (both positive and negative pressures, or matric suction) were continuously monitored for 2 years at the pumped site, at an adjacent untreated control section, and for 1 year at the site stabilized with horizontal drains. Resulting data were used to calculate a time series of the factor of safety using a computer model. Over the course of two wet seasons, average bank retreats for the control and pumped plots were 0·43 and 0·21 m, respectively. More limited monitoring revealed that the site with passive drains retreated about 0·23 m. At the pumped site pore water pressure was 3–4 kPa lower than at the control site during the most critical periods. Accordingly, computed factors of safety were above the failure threshold at the pumped site, but fell below unity at the control site on 11 occasions over the period of observation. Similarly, the drained site displayed generally lower pore water pressure and higher safety factors except for two events when drains were evidently overwhelmed with the volume of local surface and subsurface flows. These results suggest, but do not prove, that bank dewatering promoted lower rates of bank retreat and higher levels of stability since the three sites had slight differences in soils, geometry and boundary conditions. Initial cost of the dewatering treatments were significantly less than orthodox bank stabilization measures, but operation and maintenance requirements may be greater. Published in 2009 by John Wiley & Sons, Ltd.