Intersexes in Mississippi River shovelnose sturgeon sampled below Saint Louis, Missouri, USA.

The Missouri Department of Conservation detected high organochlorine levels in tissues of fish from the Mississippi River south of Saint Louis. Chlordane, which is both a carcinogen and an endocrine disrupter, reached 2960 micrograms/kg in fillets of shovelnose sturgeon, Scaphirhynchus platyorynchus, and 1926 micrograms/kg in their roe, wet weight basis. Polychlorinated biphenyls (PCBs) and p,p'-dichlorodiphenyldichloroethylene (DDE) in roe have reached 5810 and 780 micrograms/kg, respectively. The purpose of this study was to determine if endocrine disrupters and carcinogens are a potential cause of the significantly diminished reproduction capacity and population declines in the endangered pallid sturgeon, Scaphirhynchus albus. Twenty-four surrogate shovelnose sturgeons were sampled north of Saint Louis where contaminant levels were lower compared with 17 sampled south of Saint Louis where contaminant levels were high. Liver and gonad tissues were formalin-fixed, histologically processed and examined. Neoplasms were not found. The principal finding was that the testes of two of the seven downstream male fish contained ovigerous lamellae, in addition to mature sperm. Since sturgeons are gonochoristic and intersexes are rare and unusual, the occurrence of intersex in 29% of the male Mississippi River shovelnose sturgeon examined from a population contaminated with chlordane and other chemicals raise concern for human health, species biodiversity and preservation of waterway quality. These findings, however, need to be corroborated by expanded studies with a higher sample size.     

Observations of the countercurrent on the inshore side of the Kuroshio northeast of Taiwan

Intensive current measurements in the area northeast of Taiwan indicate subsurface, southwestward flow existed between the inshore edge of the Kuroshio and the East China Sea continental slope. At 70 km away from Taiwan, this countercurrent has a mean speed about 30 cm s^–1 at mid-depth. Closer to Taiwan, the flow turns along with the topography, and subjects to sidewall and bottom friction. Both the magnitude and the vertical shear of this countercurrent are comparable with that inferred from hydrographic survey. The wind field features short-period (a few days) fluctuations associated with the cold front passages, however, this is not reflected on the current records. It appears that the countercurrent is fairly steady. Together with similar reversing flow found at places much further to the north, the overall pattern seems to be a general quasi-steady feature along most part of the shelf edge of the East China Sea.     

Jason-1: Assessment of the System Performances

On 7 December 2001, Jason-1 was successfully launched by a Boeing Delta II rocket from the Vandenberg Air Force Base, California. The Jason-1 satellite will maintain the high accuracy altimeter service provided since 1992 by TOPEX/Poseidon (T/P), ensuring the continuity in observing and monitoring the Ocean Dynamics (intraseasonal to interannual changes, mean sea level, tides, etc.). Despite one-fourth the mass and power, the Jason-1 system has been designed to have basically the same performance as T/P, measuring sea surface topography at a centimetric level. This new CNES/NASA mission also provides near real-time data for sea state and ocean forecast. The first two months of the Jason-1 mission have been dedicated to the assessment of the overall system. The goals of this assessment phase were:

1. To assess the behavior of the spacecraft at the platform and payload levels (Jason-1 being the first program to call on the PROTEUS versatile multimission platform for Low and Medium Earth Orbit Missions developed in partnership between Alcatel Space and CNES);

2. To verify that platform performance requirements are met with respect to Jason-1 requirements;

3. To verify that payload instruments performance requirements evaluated at instrument level are met;

4. To assess the performance of the Jason-1 Ground System.

This article will display the main outputs of the assessment of the system. It will demonstrate that all the elements of the onboard and ground systems are within the specifications. Provision of data to the Jason-1 Science Working Team started at the end of March 2002. This is the goal of a six-month phase after closure of the initial assessment phase to derive the error budget of the system in terms of altimetry user products.     

Effects of presence of a circumpolar region on buoyancy-driven circulation

Effects of the presence of a circumpolar region on buoyancy-driven circulation are investigated by using an idealized numerical ocean model. Comparison of circulation and meridional density (heat) transport is made between a closed ocean and an ocean with a cyclic gap near its southern boundary. The presence of the circumpolar region leads to disconnection of the meridional overturning across the circumpolar region. And the circumpolar eastward flow reaches the bottom of the ocean. It is essential for this that the pycnocline is deeper than the bottom of the gap. Since the amount of the mass transported northward must return southward at the levels deeper than the bottom of the cyclic gap, the weak stratification, hence weak vertical geostrophic shear, at the deeper levels leads to inactive communication across the circumpolar region. Meridional heat transport across the circumpolar region is made mainly by horizontal diffusion for the ocean with the cyclic gap, while the contribution of the advection is dominant for the closed ocean. Sensitivity of meridional heat transport to change in horizontal diffusivity is studied. The meridional heat transport for the ocean with the cyclic gap is more sensitive than for the closed ocean. The change in heat transport occurs not only in the circumpolar region but also in the rest of the ocean. It is suggested that subgrid scale phenomena, especially mesoscale eddies, in the circumpolar region controls the whole ocean to a great extent.     

A new concept of a hull form to improve wave response characteristics for marine construction barges

The object of the new hull form is to provide a single hull which possesses long natural periods of roll and heave and has substantially reduced motion response amplitudes in very high sea states. Model tests and preliminary estimates indicated that the new hull form can be designed for roll and heave motions nearly equivalent to those of much larger semisubmersible units.All existing conventional marine construction barges have rectangular cross section hull. The new hull form consists of a system of upper side tanks and lower side tanks added onto a rectangular cross section hull. The upper tanks and lower tanks form longitudinal troughs on the port and starboard sides. Structural grillage of any open type is to connect the upper and lower tanks at the side of the vessel. Figure 1 indicates a profile and a typical transverse section of the new hull form. The new hull comprises the concept of reduced water plane area which is turn results in low transverse metacentric height and low tons per in. immersion. The novel features of combining low GM_T and low TPI with extremely heavy damping and added mass of the entrained water characteristics result in very long natural periods of roll and heave and considerably small rolling and heaving amplitudes in high sea states. The open side shell plating on the side of the vessel functions to dissipate wave energy at the side of the vessel which would have otherwise been transmitted to the vessel and caused the vessel to respond. This paper presents the conceptual foundation and outline of the new hull form. Model test results are presented and implemented. Also presented is the design philosophy.     

哈萨克斯坦共和国地震学数据库简介

建立哈萨克斯坦共和国地震学数据库是CASIN国际项目的一部分,应由中亚各国来共同完成。项目主要目的旨在建立地震学数据库,以作为今后减小哈萨克斯坦共和国地震危险性的工作基础。哈萨克斯坦共和国地震学数据库由下列子系统构成:1)文件输入子系统;2)信息检索和提交子系统;3)信息元数据存储子系统;4)档案库运行控制子系统;5)信息安全子系统。哈萨克斯坦共和国地震学数据库有以下功能:1)永久存储综合信息并上报和收集(记录)其他资料;2)存储数据和资料计算;3)电子文档的长期存储和管理;4)规定序号进行信息查询和文件的联机保证;5)信息统计和…     

A review of the equations used to predict the velocity distribution within a ship’s propeller jet

Predicting the velocity within the ship’s propeller jet is the initial step to investigate the scouring made by the propeller jet. Albertson et al. (1950) suggested the investigation of a submerged jet can be undertaken through observation of the plain water jet from an orifice. The plain water jet investigation of Albertson et al. (1950) was based on the axial momentum theory. This has been the basis of all subsequent work with propeller jets. In reality, the velocity characteristic of a ship’s propeller jet is more complicated than a plain water jet. Fuehrer and Römisch (1977), Blaauw and van de Kaa (1978), Berger et al. (1981), Verhey (1983) and Hamill (1987) have carried out investigations using physical model. Current paper reviews the state-of-art of the equations used to predict the time-averaged axial, tangential and radial components of velocity within the zone of flow establishment and the zone of established flow of a ship’s propeller jet.     

Large aperture seismic imaging at a convergent margin: Techniques and results from the Costa Rica seismogenic zone

In March and April 1995 a cooperative German, Costa Rican, and United States research team recorded onshore-offshore seismic data sets along the Pacific margin of Costa Rica using the R/V Ewing. Off the Nicoya Peninsula we used a linear array of ocean bottom seismometers and hydrophones (OBS/H) with onshore seismometers extending across much of the isthmus. In the central area we deployed an OBS/H areal array consisting of 30 instruments over a 9 km by 35-km area and had land stations on the Nicoya Peninsula adjacent to this marine array and also extending northeast on the main Costa Rican landmass. Our goal in these experiments was to determine the crustal velocity structure along different portions of this convergent margin and to use the dense instrument deployments to create migrated reflection images of the plate boundary zone and the subducting Cocos Plate. Our specific goal in the central area was to determine whether a subducted seamount is present at the location of the 1990, M 7 earthquake off the Nicoya Peninsula and can thus be linked to its nucleation. Subsequently we have processed the data to improve reflection signals, used the data to calculate crustal velocity models, and developed several wide-aperture migration techniques, based on a Kirchhoff algorithm, to produce reflection images. Along the northern transect we used the ocean bottom data to construct a detailed crustal velocity model, but reflections from the plate boundary and top and bottom of the subducting Cocos plate are difficult to identify and have so far produced poor images. In contrast, the land stations along this same transect recorded clear reflections from the top of the subducting plate or plate boundary, within the seismogenic zone, and we have constructed a clear image from this reflector beneath the Nicoya shelf. Data from the 3-D seismic experiment suffer from high-amplitude, coherent noise (arrivals other than reflections), and we have tried many techniques to enhance the signal to noise ratio of reflected arrivals. Due to the noise, an apparent lack of strong reflections from the plate boundary zone, and probable structural complexity, the resulting 3-D images only poorly resolve the top of the subducting Cocos Plate. The images are not able to provide compelling evidence of whether there is a subducting seamount at the 1990 earthquake hypocenter. Our results do show that OBS surveys are capable of creating images of the plate boundary zone and the subducting plate well into the seismogenic zone if coherent reflections are recorded at 1.8 km instrument spacing (2-D) and 5 km inline by 1 km crossline spacing for 3-D acquisition. However, due to typical high amplitude coherent noise, imaging results may be poorer than expected, especially in unfavorable geologic settings such as our 3-D survey area. More effective noise reduction in acquisition, possibly with the use of vertical hydrophone arrays, and in processing, with advanced multiple removal and possibly depth filtering, is required to achieve the desired detailed images of the seismogenic plate boundary zone.