Mathematical modeling of PCB bioaccumulation in Perna viridis

In the present work, we built a mathematical model of polychlorinated biphenyl (PCB) bioaccumulation in Perna viridis, namely, a one-compartment model with a time dependent incorporation rate R (μg g⁻¹ lipid per ppb water per day), with positive substrate cooperativity as the underlying physical mechanism. The temporal change of the PCB concentration Q (μg g⁻¹ lipid) in the soft tissues of the mussel depends on the competition of the input rate RW and the output rate kQ, where W is the concentration of PCB in water (ppb water) and k is the elimination rate (per day). From our experimental data, k=0.181±0.017 d⁻¹. The critical concentration in water W_c for positive substrate cooperativity was found to be 2.4 ppb. Below W_c, R is a constant. For a water concentration of 0.5 ppb Aroclor 1254, R=24.0±2.4 μg g⁻¹ lipid ppb⁻¹ d⁻¹. Above W_c, positive substrate cooperativity comes into effect and R becomes a function of time and dependent on the concentration Q in a form R=γQ/(Q+δ). This is the case for a water concentration of 5 ppb Aroclor 1254, where γ=15.1 μg g⁻¹ lipid ppb⁻¹ d¹ and δ≈200 μg g⁻¹ lipid. From this model, the uptake is exponentially increasing when the PCB concentration in the mussel is small compared to 200 μg g⁻¹ lipid, and hyperbolically increasing when the concentration is large compared to 200 μg g⁻¹ lipid, which are consistent with the experimental data. The model is useful for understanding the true processes taking place during the bioaccumulation and for risk assessment with higher confidence. Future experimental data which challenge the present model are anticipated and in fact desirable for improvement and perfection of the model.     

The French Guyana doleritic dykes: geochemical evidence of three populations and new data for the Jurassic Central Atlantic Magmatic Province

A petrographic and geochemical study of 15 Early Jurassic and 7 Proterozoic dolerites of French Guyana, and of one Jurassic dolerite from Ivory-Coast were carried out. The Early Jurassic SSW-NNE trending dykes have doleritic aphyric or gabbroic phyric texture. Their chemical compositions, slightly under-saturated to over-saturated, show moderate to low Mg-ratios (63–36), high TiO₂ contents (1.85–3.56 wt.%), weak rare earth element fractionation [1.8<(La/Yb)_n <4.6], negative Sr-anomalies (0.41<Sr* <0.91) and positive TiO₂-anomalies (1.2<TiO₂*<2.15). They correspond to sub-alkaline high-Ti basalts (HTiB). The La/Nb ratio (1.18±0.23) is close to that of the OIB-type Deccan basalts and incompatible element ratios: Rb/Nb_n (1.07±0.3), Zr/Y (4.6±0.8) are intermediate between those of HTiB in Deccan and those of HTiB in Paraná. These geochemical signatures and recent isotopic data of Bertrand et al. [Bertrand, H., Liegeois, J.P., Deckart, K., Féraud, G., 1999. High-Ti tholeiites in Guinea and Their Connection with the Central Atlantic CFB Province: Elemental and Nd-Sr-Pb Isotopic Evidence for Preferential Zone of Mantle Upwelling in Cause of Rifting. AGU spring meeting (Abst. p 317)] suggest that their magmatic source is different from that of the other basalts of the Central Atlantic Magmatic Province (CAMP). Such signatures are restricted to a central zone coinciding with the Panafrican Rokelides suture. We propose a model of sub-lithospheric preferential channelling of an asthenospheric ascent in this zone. Two other groups of dykes were identified in French Guyana. Compared to the Jurassic ones the Proterozoic dykes have NNW-SSE and E-W trending direction, more important LILE enrichment, low TiO₂ contents (<2 wt%) and Nb–Ta negative anomalies. Their calc-alkaline signature could be the result of a previous subduction and may be related to the 1800 Ma Venturi-Tapajós event, which contaminated the mantle source.     

Modelling of meteorological conditions at an urban scale for the PUMA winter campaign

For the winter 2000 campaign of the Pollution of Urban Midlands Atmosphere project, observation and numerical modelling of meteorological conditions over the West Midlands conurbation, UK, was undertaken. Modelling was performed using the regional atmospheric meteorological system (RAMS). This paper presents a comparison of modelled and observed wind and temperature for 25 and 26 January 2000. The RAMS model uses two nested grids with a mesh size of 2 km for the inner grid which is embedded in the outer grid with a mesh size of 8 km. Statistical evaluation of the model results against the observational data of wind speed, direction and temperature at 10 m was conducted. In general, the modelling results are in a reasonable agreement with observation. The statistical evaluation suggests that model performance is poorer for the inner grid than the outer grid as the model uncertainties (mainly mean bias) transfer from the outer to inner one. The low indices of agreement of temperature and wind are mainly associated with the systematic root-mean-square-difference values. For temperature, the systematic bias may also be affected by representation of cloud amount by the model. For wind, the model tends to have a poor performance for calm conditions, as under a stable anti-cyclonic situation local wind patterns associated with topography may develop, although the topography of the region is relatively flat. The results for the inner grid reveal some subtle spatial patterns at a scale smaller than 10 km near hills and valleys with differences in elevation of a few hundred metres.     

Optimal placement of dampers and actuators based on stochastic approach

A general method is developed for optimal application of dampers and actuators by installing them at optimal location on seismic-resistant structures. The study includes development of a statistical criterion, formulation of a general optimization problem and establishment of a solution procedure. Numerical analysis of the seismic response in time-history of controlled structures is used to verify the proposed method for optimal device application and to demonstrate the effectiveness of seismic response control with optimal device location. This study shows that the proposed method for the optimal device application is simple and general, and that the optimally applied dampers and actuators are very efficient for seismic response reduction.     

Models of passive margin inversion: implications for the Rhenohercynian fold-and-thrust belt, Belgium and Germany

Positive tectonic inversion is related to the transmission of compressional stresses along a décollement into the foreland of an orogenic zone. This stress and strain concentration in regions remote from the main orogenic front is commonly related to the presence of pre-existing rheological heterogeneities such as normal syn-depositional faults. During inversion, these pre-existing normal faults are reactivated as reverse faults. Tectonic inversion in the Rhenohercynian fold-and-thrust belt during the Variscan Orogeny shows that inversion is likely synchronous with the onset of collision in the hinterland. Here, we present the results of a simplified thermo-mechanical model (STM) which allows one to study strain partitioning between two orogenic zones. We show that, if the two orogenic zones have the same mechanical properties, the viscosity of the décollement, which links them, controls the initial strain partitioning. During subsequent finite shortening, erosional processes determine the partitioning of strain rate. The presence of a weak structure in the inverted zone and of a low-viscosity décollement leads to initial strain concentration in the inverted track rather than in the collision zone and a progressive decrease in strain partitioning between the two orogenic zones. The STM results are in good agreement with results of a 2D finite-element model. We conclude that, in the western part of the Rhenohercynian Massif, simultaneous uplift and deformation within the Mid-German Crystalline Rise (the main collision zone) and the Ardenne Anticlinorium (the inverted zone) lead to interpreting this orogenic event as a case of vice tectonic rather than the propagation of a ‘wave of folding’ towards the Variscan front, as suggested by previous authors.     

山西北部至晋冀蒙交界地区几次中强地震前4.0级地震活动的研究

对山西北部至晋冀蒙交界地区中强地震前的 4 .0级地震进行了研究 ,得出其特征为异常增强—异常平静—信号地震的结论 ,认为该区某些 4 .0级地震活动似可作为某些中强地震的前兆地震而进行进一步的研究。     

Model-independent Travel-time Attributes for 2-D, Finite-offset Multicoverage Reflections

— In this paper, we provide a 5-parameter stacking formula to transform 2-D prestack data into a particular common-offset section. This requires the knowledge of the near-surface velocity only and it is expected that ray theory holds to describe primary reflections. The earth model can be arbitrarily inhomogeneous. The new stacking approach can be viewed as a generalization of the 3-parameter common-reflection-surface (CRS) stack, by which 2-D multicoverage data are stacked into a simulated zero-offset section. The new 5-parameter formula can handle P-P, P-S and S-S reflections.     

USING UPLAND FOREST IN SHIMENTAI NATURE RESERVE,CHINA*

ABSTRACT. The Shimentai Nature Reserve in Yingde County, Guangdong Province, China, established recently in a subtropical upland forest area, has served for ages as an essential and customary source of livelihood for local people. Assessment of forest usage indicates heavy reliance by villagers on its diversified biotic resources. This forest dependence, associated with socioeconomic factors such as distance from village, ethnic origin, out‐migration of rural youngsters, and a local tradition of conservation, is unlikely to decline in the near future. The reserve management recognizes the need to address the livelihood issues of local people and to win local support. A pragmatic adherence to provincial and higher‐level policies that exclude forest‐tapping activities could lead to more people‐versus‐park conflicts, which would dilute fundamental conservation objectives. A more enlightened and localized approach that nurtures a synergy between limited forest use and conservation while helping to develop new income sources could furnish workable alternatives.     

浅析湘南地区锰矿矿源物质来源

简述湘南地区表生氧化锰矿矿源层的分布及岩性特征，讨论矿源层与构造及岩相古地理的关系。