A new approach to the determination of the critical slip surfaces of slopes

A new method for the determination of the critical slip surfaces of slopes is proposed in this paper.In this paper,the original critical slip field method is extended in terms of the total residual moment,values of residual work as well as the unbalanced thrust force at the exit point for a given non-circular slip surface.The most critical slip surface with the maximum representative value for a prescribed factor of safety will be optimized and located using the harmony search algorithm.The prescribed factor of safety is modified with certain tiny interval in order to find the critical slip surface where the maximum representative value is zero.The aforementioned approach to the location of the critical slip surface is greatly different from the traditional limit equilibrium procedure.Three typical soil slopes are evaluated by use of the proposed method,and the comparisons with the classical approaches have illustrated the applicability of the proposed method.     

Hydroelastic optimisation of a composite marine propeller in a non-uniform wake

The purpose of this paper is to optimise the hydroelastic performance of a composite marine propeller to reduce vibration and dynamic stress. A hydroelasticity method based on the finite element method (FEM) coupled with computational fluid dynamics (CFD) is used to simulate the composite marine propeller in a non-uniform wake. Composite blades can be considered as a cantilever-like laminated structure experiencing an unsteady hydrodynamic load and centrifugal force. The objective of the improved design is to minimise the vibratory hub loads. The ply angle and stacking sequence are considered as the design variables. The nonlinear periodic transient responses and vibration hub loads of the composite blade are obtained by solving coupled equations using the Newton–Raphson numerical procedure. Compared to the starting design of the propeller, the optimum solution results in a 49.6–70.6% reduction of the 7/rev hub loads.     

Mapping QTLs of caudal fin length in common carp (Cyprinus carpio L.)

Common carp (Cyprinus carpio L.) exhibits significant morphological variability in the shape and size of the caudal fin. In this study, we used 190 progeny from two F₁ parents to identify and map quantitative trait loci (QTLs) that influence caudal fin length (CFL) and the ratio (RCS) between caudal fin length and standard length (SL) based on a microsatellite genetic map of common carp. A total of 15 QTLs were detected in seven different linkage groups. One significant and eight suggestive QTLs affecting CFL were identified on LG8, LG14, LG29, LG32 and LG44, which explained 8.0%–22.1% of the phenotypic variation; six suggestive QTLs affecting RCS were detected on LG8, LG32, LG46 and LG48, which explained 7.0%–15.4% of the phenotypic variation. The QTLs for caudal fin length detected in this study may serve as a starting point for identification of genes involved in caudal fin development in common carp.     

Variations in the quantity and composition of seston from an estuary in southern Chile on different temporal scales

Estuaries are characterised by highly variable environmental conditions largely driven by tidal and atmospheric forces. This study investigates variation in the physical environment and the composition of the seston on various temporal scales in the Quempillén estuary, southern Chile. The water column was sampled throughout the tidal cycle at various times of the year. Total particulate matter, particulate inorganic matter, particulate organic matter, particle numbers, total particle volume, proximate biochemical composition and energy content of the seston, chlorophyll a and chloropigments were routinely measured. In each of the months in which sampling took place, two or three tidal cycles were examined. The information not only helps to explain the dynamics of the estuary, but is essential for an understanding of the physiology and ecology of the suspension-feeders which exploit the seston as a food source, the most dominant being the gastropod Crepipatella dilatata. Temperature and salinity were generally highest during summer, but seston quality, defined by energy content and biochemical composition (lipid, protein and carbohydrate) was higher at the end of winter and during spring. Chlorophyll a values were greatest in late spring (November). Many of the variables studied changed frequently according to the phase of the tidal cycle, and in several cases significant differences were observed among tidal cycles from the same month of the same year. In general the variables measured did not exhibit consistent patterns linked to the tidal cycle, possibly because any such patterns were masked by atmospheric conditions (wind and rain) that dominate the region and greatly influence the estuary. The quantity and quality of the seston available to suspension-feeders is largely determined by these atmospheric forces, which cause an influx of terrigenous material from adjacent areas and also resuspend bottom sediment. These effects are magnified by the shallowness of the estuary (<2 m depth). The food supply for C. dilatata and other suspension-feeders therefore varies on temporal scales varying from hourly (tidal cycle) to daily/weekly (atmospheric forces) to monthly (seasonal influences), but inhibition of feeding by low salinity sometimes limits the ability of C. dilatata to exploit fully the available organic matter.     

绿潮迁移过程中环境要素与浒苔藻体生物学特征的相关性分析

浒苔(Ulva prolifera)引起的大规模绿潮起源于黄海南部,在向北迁移过程中生物量迅速扩增,在海州湾附近(35°N左右)迅速增加达到峰值.在绿潮漂浮迁移过程中,海水表层温度、溶解无机氮(dissolved inorganic nitrogen,DIN)和磷酸盐(PO43--P)变化显著.本文以迁移过程中的浒苔为...     

Thermodynamic characterization of boltwoodite and uranophane: Enthalpy of formation and aqueous solubility

Boltwoodite and uranophane are uranyl silicates common in oxidized zones of uranium ore deposits. An understanding of processes that impact uranium transport in the environment, especially pertaining to the distribution of uranium between solid phases and aqueous solutions, ultimately requires determination of thermodynamic parameters for such crystalline materials. We measured formation enthalpies of synthetic boltwoodites, K(UO₂)(HSiO₄)·H₂O and Na(UO₂)(HSiO₄)·H₂O, and uranophane, Ca(UO₂)₂(HSiO₄)₂·5H₂O, by high temperature oxide melt solution calorimetry. We also studied the aqueous solubility of these phases from both saturated and undersaturated conditions at a variety of pH. The combined data permit the determination of standard enthalpies, entropies and Gibbs free energies of formation for each phase and analysis of its potential geological impact from a thermodynamic point of view.     

Thermal anomalies associated with shallow gas hydrates in the K-2 mud volcano, Lake Baikal

Thermal measurements and hydrate mapping in the vicinity of the K-2 mud volcano in Lake Baikal have revealed a particular type of association of thermal anomalies (29–121?mW?m^–2) near hydrate-forming layers. Detailed coring within K-2 showed that hydrates are restricted to two distinct zones at sub-bottom depths exceeding 70–300?cm. Temperature data from stations with hydrate recovery and degassing features all display low thermal gradients. Otherwise, the thermal gradients within the mud volcano are generally increased. These findings imply a more complicated thermal regime than often assumed for mud volcanoes, with important roles for both fluids and hydrates. The coexistence of neighbouring low and high thermal anomalies is interpreted to result from discharging and recharging fluid activity, rather than hydrate thermodynamics. It is suggested that hydrates play a key role in controlling the fluid circulation pattern at an early stage. At a later stage, the inflow of undersaturated lake water would favour the dissolution of structure I hydrates and the formation of structure II hydrates, the latter having been observed on top of structure I hydrates in the K-2 mud volcano.     

Acoustic Monitoring of Gas Emission Processes in the Arctic Shelf Seas

Oceanology - The emission of natural gas from the seafloor to the surface in shelf areas of the Arctic seas is of increasing interest among researchers. Recently, various types of acoustic...     

Numerical and experimental study on hydrodynamic interaction of side-by-side moored multiple vessels

This paper aims to investigate the basic interaction characteristics of side-by-side moored vessels both numerically and experimentally. A higher-order boundary element method (HOBEM) combined with generalized mode approach is applied to analysis of motion and drift force of side-by-side moored multiple vessels (LNG FPSO, LNGC and shuttle tankers). Model tests were carried out for the same floating bodies investigated in the numerical study in regular and irregular waves. Global and local motion responses and drift forces of three vessels are compared with those of calculations. Discussions is highlighted on applicability of numerical method to prediction of sophisticated multi-body interaction problem of which motion behavior is very important to analysis of mooring dynamics of deep sea floating bodies.