Calculating Method and Verification of Wave Pressure Distribution on the Breast Wall of Mound Breakwater

In this paper, the calculating charts and formulae about wave pressure on the breast wall are derived with seven parameters on the basis of physical model study. The verification shows that the charts agree with the example, and are adopted in the Specifications of Fishery Harbours Breakwater by the Ministry of Agricultures.     

Elasto-Plastic Analysis of Tubular Joints of Offshore Platforms by Finite Element Method

The plastic node method is reformulated by the variational principle and is applied to elasto-plastic finite element analysis of tubular joints, eventually including the effect of internal and external gussets, stiffener rings, etc., if necessary. Four different joints are studied here in detail for the elasto-plastic behavior, the strain at the hot spot, the strain concentration factor around the intersection line, and the propagation of the plastic region with loading up to collapse in order to determine the ultimate strength, safety factor, and development of the plastic field. The present results are in good agreement with the experimental results.     

Wave-Current Forces on Slender Circular Cylinders

- A series model tests of wave forces by both regular and irregular waves combined with currents on single piles and bipiles in tandem and parallel arrays have been carried out. Based on Morison Equation, linear wave theory and linear wave spectrum theory as well, the characteristics of inline, lift and resultant forces on cylinders have been analyzed respectively. The drag, inertia and lift coefficients CD, CM and CL f皉 single piles related to KC number and the grouping effect coefficients of inline, lift and resultant forces on bipiles in tandem and parallel arrays related to KC number are given in this paper.     

Numerical Simulation of Multi-Directional Random Seas

Multi-directional irregular waves are simulated on the basis of the given directional spectrum using a double summation model, a single direction per frequency model and a single summation model. Their results are compared. It is shown that the single direction per frequency model proposed in this paper can generate a realistic wave field. The effects of the model parameters on the simulated results are also studied in this paper and corresponding suggestions are given.     

Overtopping Discharge of Wind-Waves on Simple Slope Dikes

An empirical formula for estimating the overtopping discharge of wind-waves on a smooth-impermeable-simple slope dyke is derived through model tests in this paper, it can be adopted by related design departments in the determination of the crest elevation of the dyke.     

A Note on Soil Structure Resistance of Natural Marine Deposits

It has been well documented that natural normally-consolidated marine soils are generally subjected to the effects of soil structure. The interpretation of the resistance of soil structure is an important issue in the theory study and engineering practice of ocean engineering and geotechnical engineering. It is traditionally considered that the resistance of soil structure gradually disappears with increasing stress level when the applied stress is beyond the consolidation yield stress. In this study, however, it is found that this traditional interpretation of the resistance of soil structure can not explain the strength behavior of natural marine deposits with a normally-consolidated stress history A new interpretation of the resistance of soil structure is proposed based on the strength behavior. In the preyield state, the undrained strength of natural marine deposits is composed of two components: one developed by the applied stress and the other developed by the resistance of soil structure. When the applied stress is beyond the consolidation yield stress, the strength behavior is independent of the resistance of soil structure.     

Effects of chemical ecological adjustment and control experiment on phytoplankton community in the Aoshan Bay

There is a low nutrient level in the Aoshan Bay. In June 1999, the chemical adjustmentand control experiment was made in the Aoshan Bay. Following tracts investigation was carried out before the experiment and on the 1st, 2nd, 4th, 5th, 6th and 45th day/after the experiment. While the variance of amount of phytoplankton, the replacement of superior species and the species composition of phytoplankton were researched. The results show that the amount of phytoplankton in the Aoshan Bay rises gradually after the experiment. Ceratium macroceros Cleve of pyrophyta was the dominant species before the experiment, its dominant index was 37.7％. Six days after the experiment, its dominant index dropped to 17.6％ . Meanwhile the dominant index of Asterionella japanics Cleve rose from 7.1％ to 39.2％ , it became the first dominant species. Forty-five days after the experiment, the amount of phytoplankton in the Aoshan Bay was 5.15 to 137.32 times more than that in 1997.     

东山湾贝类养殖容量的估算

以初级生产力为基础，应用营养动态模式和沿岸海域能流分析模型，估算东山湾贝类年生产量分别为269331t和295767t，平均282549t。扣除潮间带、潮下带和吊养区浮筏、随着基及延绳上附着的非养殖滤食性附着动物自然现存量35760t，贝类可养殖量为246789t。应用统计分析和逻辑斯谛种群增长模型估计贝类可养面积为11839hm^2，其中缢蛏635hm^2，石蛎1160hm^2,吊蛎1525hm^2，翡翠贻贝633hm^2，菲律宾蛤仔1154hm^2，扇贝698hm^2，江瑶248hm^2，泥蚶601hm^2，巴非蛤4151hm^2，凸壳肌蛤1034hm^2。1998年实际养殖面积和养殖产量分别为10581hm^2和220564t。尚有1258hm^2,26225t的扩大开发潜力。文中还讨论了合理布局和优化养殖结构问题。     

Fuzzy Optimum Model of Semi-Structural Decision for Lectotype Optimization of Offshore Platforms

In the process of concept design of offshore platforms, it is necessary to select the best from feasible alternatives through comparison and filter. The criterion set, used to evaluate and select the satisfying alternative, consists of many qualitative and quantitative factors. Therefore, the selection is a problem of multicriteria and semi- structural decision- making. Different from traditional methods in semi- structural decision- making, a new framework and methodology is presented in this paper for evaluation of offshore platform alternatives. First, the criterion set is established for the evaluation of alternatives. Next, the approach is studied to construct the relative membership degree matrix, in which both qualitative and quantitative factors are consistent with the uniform calculating standard. And then a new weight-assessing method is developed for calculation of the weights based on the relative membership degree matrix. Finally, a multi-hierarchy fuzzy optimum model is adopted to select t     

Computation of Viscous Uniform and Shear Flow over A Circular Cylinder by A Finite Element Method

The incompressible viscous uniform and shear flow past a circular cylinder is studied. The two-dimensional Navier-Stokes equations are solved by a finite element method. The governing equations are discretized by a weighted residual method in space. The stable three-step scheme is applied to the momentum equations in the time integration. The numerical model is firstly applied to the computation of the lid-driven cavity flow for its validation. The computed results agree well with the measured data and other numerical results. Then, it is used to simulate the viscous uniform and shear flow over a circular cylinder for Reynolds numbers from lO0 to lO00. The transient time interval before the vortex shedding occurs is shortened considerably by introduction of artificial perturbation. The computed Strouhal number, drag and lift coefficients agree well with the experimental data. The computation shows that the finite element model can be successfully applied to the viscous flow problem.