Methane hydrate formation comparisons in media with and without a water source supply

Water is a necessary element during gas hydrate formations. Therefore, by analyzing water depletion changes in media, the reaction characteristics of methane hydrate in media can be studied. In this study, two water sources supplying some liquid water which may be consumed by the methane hydrate formation reactions were designed and assembled. Using them, the full formation processes of methane hydrate was studied. Experimental results show the following： If heat released from nucleation reaction of methane hydrate is diffused rapidly, the nucleation ratios will be enhanced discernibly. While the hydrate is formed, a force is generated that sucks fresh water from the source into the vicinity of the hydrate, slowing down the cementation process and causing some hydrate grain dissociation. As a result of cementation differences, the hydrate reaction processes with different water sources present linear or quadratic equation characteristics. After a few repeated dissociation and formation processes of some hydrate grains caused by the fresh water, the gas amounts contained in hydrate will be significantly enhanced.     

Mass-front velocity of dry granular flows influenced by the angle of the slope to the runout plane and particle size gradation

The mass-front velocities of granular flows results from the joint action of particle size gradations and the underlying surfaces.However,because of the complexity of friction during flow movement,details such as the slope-toe impedance effects and momentum-transfer mechanisms have not been completely explained by theoretical analyses,numerical simulations,or field investigations.To study the mass-front velocity of dry granular flows influenced by the angle of the slope to the runout plane and particle size gradations we conducted model experiments that recorded the motion of rapid and long-runout rockslides or avalanches.Flume tests were conducted using slope angles of 25°,35°,45°,and 55° and three particle size gradations.The resulting mass-front motions consisted of three stages:acceleration,velocity maintenance,and deceleration.The existing methods of velocity prediction could not explain the slowing effect of the slope toe or the momentum-transfer steady velocity stage.When the slope angle increased from 25° to 55°,the mass-front velocities dropped significantly to between 44.4% and59.6% of the peak velocities and energy lossesincreased from 69.1% to 83.7% of the initial,respectively.The velocity maintenance stages occurred after the slope-toe and mass-front velocity fluctuations.During this stage,travel distances increased as the angles increased,but the average velocity was greatest at 45°.At a slope angle of 45°,as the median particle size increased,energy loss around the slope toe decreased,the efficiency of momentum transfer increased,and the distance of the velocity maintenance stage increased.We presented an improved average velocity formula for granular flow and a geometrical model of the energy along the flow line.     

Practical Incorporation of Multivariate Parameter Uncertainty in Geostatistical Resource Modeling

There is a need to bridge theory and practice for incorporating parameter uncertainty in geostatistical simulation modeling workflows. Simulation workflows are a standard practice in natural resource and recovery modeling, but the incorporation of multivariate parameter uncertainty into those workflows is challenging. However, the objectives can be met without considerable extra effort and programming. The sampling distributions of statistics comprise the core theoretical notion with the addition of the spatial degrees of freedom to account for the redundancy in the spatially correlated data. Prior parameter uncertainty is estimated from multivariate spatial resampling. Simulation-based transfer of prior parameter uncertainty results in posterior distributions which are updated by data conditioning and the model domain extents and configuration. The results are theoretically tractable and practical to achieve, providing realistic assessments of uncertainty by accounting for large-scale parameter uncertainty, which is often the most important component impacting a project. A simulation-based multivariate workflow demonstrates joint modeling of intrinsic shale properties and uncertainty in estimated ultimate recovery in a shale gas project. The multivariate workflow accounts for joint prior parameter uncertainty given the current well locations and results in posterior estimates on global distributions of all modeled properties. This is achieved by transferring the joint prior parameter uncertainty through conditional simulations.     

文学地理学视野下香港文化认同

通过文本分析和档案分析的方法,立足文学地理学分析框架和研究范式,分析了香港70年代、过渡时期、后殖民时期三部文学界热门且公认具代表性的作品——《我城》《烦恼娃娃的旅程》和《后殖民食物与爱情》,解构了作品中“本土”“国家”和“全球”3个空间维度下再现的地理物象、空间想象、人物活动、地方文化,窥探其内部隐含的文化认同与身份意识问题。结果发现,由于香港社会历史和文化背景不断变迁等原因,香港的文化和身份意识处于不断重塑的状态。通过文本分析,发现香港文学作品中最早萌芽的是“本土”意识。西西的《我城》被认为是本土意识的发轫之作,其在港英政府和回不去的家这一夹缝中在“城”这一空间尺度上勾勒出浓浓的地方意识。其次,在中国恢复行使香港主权这一背景下,《烦恼娃娃的旅程》这一极具回归题材代表性的作品深刻地刻画了香港人在身份认同尺度升级过程中的迷惘。最后,也斯的《后殖民食物与爱情》通过“食物”为线索讲述了回归后的香港故事,为读者认识后殖民时期多元文化混杂下的香港社会提供了细致的观察。通过对三部文学作品的分析,发现港人经历了由殖民统治时期本土身份意识的觉醒以及对中国文化的归属,到回归过渡阶段身份意识的尺度升级及其不适,再到回归后多元文化的交织和协商,不仅在尺度上实现了由地方到国家再到全球化的身份意识塑造,而且在结构上存在中华文化、西方文化和香港本土文化不断协商与冲突的三重性。更为重要的是,通过文学地理视角的讨论,发现这样的文化和身份意识不是属于某个群体的特有特征,而是根植于香港社会的每一寸肌肤,不仅反映了小说作者对香港社会的细致观察,在一定程度上也反映了社会本身所面临的文化和身份困扰。     

An Analytical Model For Threshold Crossing Rates Of Concentration Fluctuations In Dispersing Plumes

A simple analytical model is developed for the meanupcrossing rate of plume concentration fluctuations assuming that thisprocess can be well approximated by a lognormal process. The resultingexpression requires only the specification of the in-plume fluctuationintensity and in-plume Taylor micro-time scale and, hence, does notexplicitly involve the joint probability density function of theconcentration and its derivative. The analytical model provides agood fit to some field measurements of the mean upcrossing rate ina dispersing plume.     

郑州节水型社会试点建设评价研究

郑州市是水利部确定的南水北调东中线受水区全国节水型社会建设试点,自2005年试点建设开展以来取得了显著的成绩,被授予全国节水型社会建设示范市。为科学评价试点建设成效,参照水利部制定的《节水型社会建设评价指标体系(试行)》,结合郑州市实际,建立了郑州节水型社会试点建设评价指标体系。采用层次分析法对节水型社会试点建设成效进行了评价,确定郑州市已基本建立节水型社会。     

祁连山南坡灌丛草甸生物量变化与水热因子的关系研究

通过野外调研和室内实验,研究了祁连山南坡灌丛草甸地上生物量的生长季变化,并对地上生物量与水热因子的关系进行了探讨。结果表明：在不同区域群落结构有所不同,覆盖度越低,上层和下层的植物高度越低,丰富度和多样性越小。但均匀度还受草场退化阶段的影响,群落结构相对稳定,植物的均匀度越高;地上生物量的年内变化是单峰曲线,乌鞘岭和门源的地上生物量在7月份最大,祁连和野牛沟的地上生物量在9月份最大;地上生物量的积累与前1月和前2月的气温和降水正相关,与前4月的气温也正相关,并且对气温变化的敏感性大于降水,但与地温和土壤水分的相关性不明显,前1月表层地温较高对地上生物量的积累有积极作用;对于地上生物量积累,日气温、日相对湿度、降水量有直接正向作用,而日最高气温、日最低气温、日水汽压有直接负向作用,5 cm、20 cm地温和0~10 cm、20~30 cm土壤水分也有直接正向作用,而10 cm地温和10~20 cm土壤水分也有直接负向作用。     

Study on uncertainty of inversion and resolution limit in the presence of noise

This study analyzed the uncertainty of inversion and the resolution limit in the presence of noise by means of statistical experiments. The exhaustive method is adopted to obtain the global optimal solution in each experiment. We found that even with small level of noise, solutions fluctuate in a large range for the thin bed. The distribution of solutions in the presence of noise is closely related to the spread of the cost function in the absence of noise. As a result, the area of a certain neighborhood around the true solution on the spread of the cost function in the absence of noise is used to evaluate the uncertainty of inversion and the resolution limit in the presence of noise. In the case that the SNR (signal-to-noise ratio) is 5 in this study, solutions focus around the true solution with a very small uncertainty only when the bed thickness is greater than the reciprocal of the double predominant frequency of the convoluting wavelet.     

基于CiteSpace中国海洋经济研究的知识图谱分析

利用CiteSpace可视化文献分析工具对1982~2013年CNKI总库中文核心期刊以及CSSCI中文社会科学引文数据库中海洋经济研究的3 441篇相关文献进行分析,绘制出研究热点、核心作者群及研究机构的知识结构图谱。结果表明：自中国海洋经济研究会成立以来,中国海洋经济研究主要围绕 “海洋经济”、“海洋产业”、“可持续发展”、“海洋资源”、“海洋开发”、“滨海旅游”等展开;韩增林、张耀光、郑贵斌、殷克东、李靖宇、徐志斌等是主要的发文作者;国家海洋局、中国海洋大学、辽宁师范大学和广东海洋大学为发文较多的机构;《海洋开发与管理》是海洋经济相关研究载文量最多的期刊,《经济地理》、《中国人口·资源与环境》、《地域研究与开发》、《资源科学》等是主要的载文核心期刊。除了传统的海洋经济研究视角下,区域海洋经济差异、海洋产业结构与布局及优化、海洋产业竞争力、海洋产业集群、现代海洋产业、海洋资源开发利用的可持续、人海关系的脆弱性、滨海旅游等的研究外,在新的国际和国内形势下,海洋经济相关理论、战略性新兴海洋产业研究、海洋经济可持续发展研究、及“一路一带”战略对海洋经济相关研究的新要求也是需要重点关注的方面。     

An inter-comparison of tidal solutions computed with a range of unstructured grid models of the Irish and Celtic Sea Regions

Three finite element codes, namely TELEMAC, ADCIRC and QUODDY, are used to compute the spatial distributions of the M₂, M₄ and M₆ components of the tide in the sea region off the west coast of Britain. This region is chosen because there is an accurate topographic dataset in the area and detailed open boundary M₂ tidal forcing for driving the model. In addition, accurate solutions (based upon comparisons with extensive observations) using uniform grid finite difference models forced with these open boundary data exist for comparison purposes. By using boundary forcing, bottom topography and bottom drag coefficients identical to those used in an earlier finite difference model, there is no danger of comparing finite element solutions for “untuned unoptimised solutions” with those from a “tuned optimised solution”. In addition, by placing the open boundary in all finite element calculations at the same location as that used in a previous finite difference model and using the same M₂ tidal boundary forcing and water depths, a like with like comparison of solutions derived with the various finite element models was possible. In addition, this open boundary was well removed from the shallow water region, namely the eastern Irish Sea where the higher harmonics were generated. Since these are not included in the open boundary, forcing their generation was determined by physical processes within the models. Consequently, an inter-comparison of these higher harmonics generated by the various finite element codes gives some indication of the degree of variability in the solution particularly in coastal regions from one finite element model to another. Initial calculations using high-resolution near-shore topography in the eastern Irish Sea and including “wetting and drying” showed that M₂ tidal amplitudes and phases in the region computed with TELEMAC were in good agreement with observations. The ADCIRC code gave amplitudes about 30 cm lower and phases about 8° higher. For the M₄ tide, in the eastern Irish Sea amplitudes computed with TELEMAC were about 4 cm higher than ADCIRC on average, with phase differences of order 5°. For the M₆ component, amplitudes and phases showed significant small-scale variability in the eastern Irish Sea, and no clear bias between the models could be found. Although setting a minimum water depth of 5 m in the near-shore region, hence removing wetting and drying, reduced the small-scale variability in the models, the differences in M₂ and M₄ tide between models remained. For M₆, a significant reduction in variability occurred in the eastern Irish Sea when a minimum 5-m water depth was specified. In this case, TELEMAC gave amplitudes that were 1 cm higher and phases 30° lower than ADCIRC on average. For QUODDY in the eastern Irish Sea, average M₂ tidal amplitudes were about 10 cm higher and phase 8° higher than those computed with TELEMAC. For M₄, amplitudes were approximately 2 cm higher with phases of order 15° higher in the northern part of the region and 15° lower in the southern part. For M₆ in the north of the region, amplitudes were 2 cm higher and about 2 cm lower in the south. Very rapid M₆ tidal-phase changes occurred in the near-shore regions. The lessons learned from this model inter-comparison study are summarised in the final section of the paper. In addition, the problems of performing a detailed model–model inter-comparison are discussed, as are the enormous difficulties of conducting a true model skill assessment that would require detailed measurements of tidal boundary forcing, near-shore topography and precise knowledge of bed types and bed forms. Such data are at present not available.