Applied hydrodynamic wave-resistance computation by Fourier transform

An applied Fourier transform computation for the hydrodynamic wave-resistance coefficient is shown, oriented to potential flows with a free surface and infinity depth. The presence of a ship-like body is simulated by its equivalent pressure disturbance imposed on the un-perturbed free surface, where a linearized free surface condition is used. The wave-resistance coefficient is obtained from the wave-height downstream. Two examples with closed solutions are considered: a submerged dipole, as a test-case, and a parabolic pressure distribution of compact support. In the three dimensional case, a dispersion relation is included which is a key resource for an inexpensive computation of the wave pattern far downstream like fifteen ship-lengths.     

The capacity of marine plankton, macrophytes and particulate matter to adsorb Cu in the presence of Mg

A complexometric titration technique was employed to measure the total capacity of a variety of marine organisms to adsorb Cu²⁺. Measured adsorption capacities were 0.22 meq g⁻¹ for phytoplankton, 0.3–1.0 meq g⁻¹ for macrophytes, 1.0–2.5 meq g⁻¹ for zooplankton and 0.3 meq g⁻¹ for suspended particulate matter. The capacity of these materials to adsorb Cu²⁺ was reduced significantly in the presence of Mg²⁺ at seawater concentrations. Competition between Mg^t2+ and Cu²⁺ for adsorption sites at pH 6 is described by an average conditional equilibrium constant of 10^3.7. This constant is such that very little Cu²⁺ may be adsorbed onto particulates and marine phytoplankton in the presence of Mg²⁺. Further, primary productivity data and estimates of the detrital carbon sedimentation in Long Island Sound suggest that the flux of particulate carbon is insufficient to remove significant amounts of Cu from the water column to sediments by adsorption mechanisms.     

Estrogenic responses of larval sunshine bass (Morone saxatilis x M. Chrysops) exposed to New York City sewage effluent

To determine the estrogenicity of effluents from sewage treatment plants (STPs) to larval fish, 2-day-old sunshine bass were exposed to effluents from three STPs serving New York City (NYC), varying in size and treatment level. Estrogenic response was evaluated by measuring vitellogenin (VTG) and estrogen receptor (ER) expression in cytosolic fractions of whole body homogenates. Concentrations of the presumptive endocrine disruptors in the effluents were also measured. VTG and ER levels in sewage-exposed fish were 3-5 times that observed in controls. Combined concentrations of estradiol and estrone ranged from 5 to 13 ng/l and nonylphenol-ethoxylate metabolites (NPEOs: 4-nonylphenol, and 1-, 2-, and 3-nonylphenol-ethoxylates) ranged from 180 to 470 microg/l in chlorinated effluent. Results indicate that both ER and VTG can be used as biomarkers for endocrine disruption in larval fish, and that 4-day exposure to sewage effluent is sufficient to elicit significant expression of these markers in sunshine bass larvae. The extremely higher concentrations of NPEOs found in effluent relative to hormones (approximately 40,000-fold) indicates that surfactant metabolites may be contributing significantly to the estrogenic effects observed.     

Wavelet analysis of bathymetric sidescan sonar data for the classification of seafloor sediments in Hopvågen Bay - Norway

In this paper we examine the use of bathymetric sidescan sonar for automatic classification of seabed sediments. Bathymetric sidescan sonar, here implemented through a small receiver array, retains the advantage of sidescan in speed through illuminating large swaths, but also enables the data gathered to be located spatially. The spatial location allows the image intensity to be corrected for depth and insonification angle, thus improving the use of the sonar for identifying changes in seafloor sediment. In this paper we investigate automatic tools for seabed recognition, using wavelets to analyse the image of Hopvågen Bay in Norway. We use the back-propagation elimination algorithm to determine the most significant wavelet features for discrimination. We show that the features selected present good agreement with the grab sample results in the survey under study and can be used in a classifier to discriminate between different seabed sediments.     

Magnetic anomalies in the canary basin and the Mesozoic evolution of the central North Atlantic

The data from a recent magnetic compilation by Verhoefet al. (1991) off west Africa were used in combination with data in the western Atlantic to review the Mesozoic plate kinematic evolution of the central North Atlantic. The magnetic profile data were analyzed to identify the M-series sea floor spreading anomalies on the African plate. Oceanic fracture zones were identified from magnetic anomalies and seismic and gravity measurements. The identified sea floor spreading anomalies on the African plate were combined with those on the North American plate to calculate reconstruction poles for this part of the central Atlantic. The total separation poles derived in this paper describe a smooth curve, suggesting that the motion of the pole through time was continuous. Although the new sea floor spreading history differs only slightly from the one presented by Klitgord and Schouten (1986), it predicts smoother flowlines. On the other hand, the sea floor spreading history as depicted by the flowlines for the eastern central Atlantic deviates substantially from that of Sundvik and Larson (1988). A revised spreading history is also presented for the Cretaceous Magnetic Quiet Zone, where large changes in spreading direction occurred, that can not be resolved when fitting magnetic isochrons only, but which are evident from fracture zone traces and directions of sea floor spreading topography.Deceased 11 November 1991     

Heat flow and mass wasting in the Wilmington Canyon Region: U.S. Continental Margin

The average corrected heat flow in the Wilmington Canyon region, an area of inferred slope instability, is 35 ± 10 mW/m². This average heat flow is marginally consistent with the 46 ± 9 mW/m² measured at other North Atlantic sites over 160 m.y. old. High topographic relief causes most of the variability in surface heat flow and may lower the mean surface heat flow. There is no significant difference between the average corrected heat flow of 35 ± 10 mW/m² in sediment slide areas and the average corrected heat flow of 34 ± 10 mW/m² in undisturbed sediments.     

Behavioural Effects of Chemically Dispersed Oil and Subsequent Recovery in Diploria strigosa (Dana)

Abstract. Survival and behaviour of the hermatypic coral Diploria strigosa was studied during 6–24 h doses with water-accomodated fractions of chemically dispersed crude oil, and for a subsequent recovery period of 1 month. Experiments utilized a flow-through laboratory dosing procedure and incorporated petroleum hydrocarbon measurements in order to simulate a major but short-term oil spill in shallow subtidal benthic reef environments. Chemically dispersed oil treatments consisted of Arabian Light Crude oil with Corexit 9527 or BP1100WD at 1–20 ppm concentrations of oil.
In general, effects observed were sub-lethal, temporary, and associated with the highest concentrations tested. Responses to the presence of dispersed oil at 20ppm for 24 h included mesenterial filament extrusion, extreme tissue contraction, tentacle retraction and localized tissue rupture. The nature and severity of reactions during the dosing phase varied between colonies and treatments, but colonies typically resumed normal behaviour within 2 h to 4 d of the recovery period. It therefore seems unlikely that observed biological effects would impair long-term viability.     

Measurement of alkaline and earthy ions in fish otolith and sea water using a high performance ion chromatography

Fish growth and the relation between growth and environmental conditions offer a good opportunity for measuring alkaline and earthy ions in fish otoliths.The analytical method must involve high sensitivity when attempting to discriminate between fish growth and environmental conditions.The aim of this paper is to propose a chromatographic method, with low detection limits, as a new approach in determining some important micronutrients present in sea water and fish otoliths.The work samples are: coastal, off-shore and sediment waters and fish otoliths (Engraulis encrasicholus, Mullus barbatus, Umbrina cirrhosa, Sciaena umbra, Pagellus erythrinus) in the Adriatic Sea and the Canal of Sicily.The analytical method includes an IONPAC CS12A chromatographic column and a 18 mM methanesulfonic acid eluent.The detection limit readings obtained with this method, for one E. encrasicholus fish otolith, weighing 2.6 mg are equal or inferior to 0.1 μg/L for lithium (Li), 59 μg/L for sodium (Na), 46 μg/L for ammonium (NH₄), 23 μg/L for potassium (K), 13 μg/L for magnesium (Mg), 88 μg/L for manganese (Mn), 2.567 μg/L for calcium (Ca) and 13 μg/L for strontium (Sr).The HPIC method minimizes overlaps such as Na on Li, and NH₄ in seawater and Ca on Mg and Sr in fish otolith. These elements are an essential constituent present in otoliths when describing the relation between growth and environmental conditions.Good separation among analytes is achieved within 16 min.     

Long term prediction of non-linear vertical bending moments on a fast monohull

An assessment is made of the maximum wave induced bending moment expected to occur during the operational lifetime of a fast monohull, based on long term distribution calculations of the non-linear vertical bending moment at mid-ship. The ship is assumed to operate in the Northern North Sea, with an operational life of 25 years. A succession of short-term stationary ship responses represented by Rayleigh distributions of peaks results in the long-term distribution of the structural loads. Non-linear pseudo transfer functions are used in the procedure to calculate the variances of the short-term responses. The amplitudes of these transfer functions are calculated by a non-linear time domain seakeeping program. The results are compared with rules minimum required values and also with results from simpler calculation procedures such as adopting design sea states.