Effect of oxidation potential and zinc sulphate on the separation of chalcopyrite from pyrite

The effects of oxidation potential (Eh) and zinc sulphate on the separation of chalcopyrite from pyrite were investigated at pH 9.0. The flotation recovery of these minerals is Eh dependent with maximum separation obtained at 275 mV SHE. Zinc sulphate addition improved this mineral separation at an Eh value of 275 mV by selectively depressing pyrite flotation. A different result was obtained at lower Eh values where zinc sulphate addition improved chalcopyrite flotation but had no or little effect on pyrite flotation. These opposite effects of zinc sulphate on mineral flotation were reconciled by examining the surface species of these minerals. The selective depression of pyrite flotation by zinc sulphate was also confirmed in the flotation of two copper ores.     

Development of a Speech-Based Augmented Reality System to Support Exploration of Cityscape

When people explore new environments they often use landmarks as reference points to help navigate and orientate themselves. This research paper examines how spatial datasets can be used to build a system for use in an urban environment which functions as a city guide, announcing Features of Interest (FoI) as they become visible to the user (not just proximal), as the user moves freely around the city. Visibility calculations for the FoIs were pre‐calculated based on a digital surface model derived from LIDAR (Light Detection and Ranging) data. The results were stored in a text‐based relational database management system (RDBMS) for rapid retrieval. All interaction between the user and the system was via a speech‐based interface, allowing the user to record and request further information on any of the announced FoI. A prototype system, called Edinburgh Augmented Reality System (EARS), was designed, implemented and field tested in order to assess the effectiveness of these ideas. The application proved to be an innovative, ‘non‐invasive’ approach to augmenting the user's reality.     

大学英语等级考试的信度与效度测试:英语四、六级与有效交际能力

关于大学英语四、六级,及其英语口语考试,是否具有科学的信度与效度这一问题的论证,引起了诸多争议。运用Carl Popper的反证法,在怀疑并否定其具有科学信度与效度方面,也不乏许多挑战权威的例子。尽管现今反证的理论与例证并不十分系统,但它终将会以科学的信度与效度为目标而日臻完善。     

Influence of fracture anisotropy on ground water ages and chemistry,Valley and Ridge province,Pennsylvania

Model ground water ages based on chlorofluorocarbons (CFCs) and tritium/helium-3 (³H/³He) data were obtained from two arrays of nested piezometers located on the north limb of an anticline in fractured sedimentary rocks in the Valley and Ridge geologic province of Pennsylvania. The fracture geometry of the gently east plunging fold is very regular and consists predominately of south dipping to subhorizontal to north dipping bedding-plane parting and east striking, steeply dipping axial-plane spaced cleavage. In the area of the piezometer arrays, which trend north-south on the north limb of the fold, north dipping bedding-plane parting is a more dominant fracture set than is steeply south dipping axial-plane cleavage. The dating of ground water from the piezometer arrays reveals that ground water traveling along paths parallel to the dip direction of bedding-plane parting has younger ³H/³He and CFC model ages, or a greater component of young water, than does ground water traveling along paths opposite to the dip direction. In predominantly unmixed samples there is a strong positive correlation between age of the young fraction of water and dissolved sodium concentration. The travel times inferred from the model ages are significantly longer than those previously calculated by a ground water flow model, which assumed isotropically fractured layers parallel to topography. A revised model factors in the directional anisotropy to produce longer travel times. Ground water travel times in the watershed therefore appear to be more influenced by anisotropic fracture geometry than previously realized. This could have significant implications for ground water models in other areas underlain by similarly tilted or folded sedimentary rock, such as elsewhere in the Valley and Ridge or the early Mesozoic basins.     

Analysis of a vertical dipole tracer test in highly fractured rock

The results of a vertical dipole tracer experiment performed in highly fractured rocks of the Clare Valley, South Australia, are presented. The injection and withdrawal piezometers were both screened over 3 m and were separated by 6 m (midpoint to midpoint). Due to the long screen length, several fracture sets were intersected, some of which do not connect the two piezometers. Dissolved helium and bromide were injected into the dipole flow field for 75 minutes, followed by an additional 510 minutes of flushing. The breakthrough of helium was retarded relative to bromide, as was expected due to the greater aqueous diffusion coefficient of helium. Also, only -25% of the total mass injected of both tracers was recovered. Modeling of the tracer transport was accomplished using an analytical one-dimensional flow and transport model for flow through a fracture with diffusion into the matrix. The assumptions made include: streamlines connecting the injection and withdrawal point can be modeled as a dipole of equal strength, flow along each streamline is one dimensional, and there is a constant Peclet number for each streamline. In contrast to many other field tracer studies performed in fractured rock, the actual travel length between piezometers was not known. Modeling was accomplished by fitting the characteristics of the tracer breakthrough curves (BTCs), such as arrival times of the peak concentration and the center of mass. The important steps were to determine the fracture aperture (240 microm) based on the parameters that influence the rate of matrix diffusion (this controls the arrival time of the peak concentration); estimating the travel distance (11 m) by fitting the time of arrival of the centers of mass of the tracers; and estimating fracture dispersivity (0.5 m) by fitting the times that the inflection points occurred on the front and back limbs of the BTCs. This method works even though there was dilution in the withdrawal well, the amount of which can be estimated by determining the value that the modeled concentrations need to be reduced to fit the data (approximately 50%). The use of two tracers with different diffusion coefficients was not necessary, but it provides important checks in the modeling process because the apparent retardation between the two tracers is evidence of matrix diffusion and the BTCs of both tracers need to be accurately modeled by the best fit parameters.     

Dissolution Enthalpies of Magnesian Calcites

A series of synthetic and biogenicmagnesian calcites was dissolved in weak acetic acidsolutions to measure the enthalpies of dissolution at25°C. For the synthetic phases, heat releasedwas 33.5 kJ/mol for calcite, decreasing to 33 kJ/molfor a phase of 2 mol % MgCO3, and increasing to35 kJ/mol for a phase of 15 mol %. Values of excessenthalpies, ΔHxs, calculated using calciteand magnesite end-members, average about -1 kJ/mol forthe synthetic phases. Total entropies of solidsolution formation, ΔSSS, also werecalculated using available data on Gibbs free energiesof formation and these excess enthalpies. Values ofΔSSS range from -2 J/(mol-K) at 2 mol % to-5 J/(mol-K) at 15 mol % MgCO3. These negativevalues of ΔHxs and ΔSSSsuggest that some form of ordering (cation?) isobtained in the synthetic phases, and that vibrationalentropies of the solid solution are diminished incomparison to the end-members. In contrast, biogenic samples generally have positivevalues of ΔHxs, increasing from +1 kJ/molat 5 mol % to +3 kJ/mol at 20 mol % MgCO3. Mostvalues of ΔSSS are equal (within errors)to values expected from configurational enthalpyalone. Thus, in most biogenic materials cationordering probably is not obtained, and most phases aremore typical of equivalent-site solid solutions.     

Abundance and size of larval fishes outside the entrance to Beaufort Inlet, North Carolina

Synoptic ichthyoplankton sampling was conducted on two transects, one on either side of Beaufort Inlet, North Carolina, during the winter immigration season of seven ocean-spawned, estuarine-dependent fishes;Brevoortia tyrannus (Atlantic menhaden),Leiostomus xanthurus (spot),Micropogonias undulatus (Atlantic croaker),Lagodon rhomboides (pinfish),Paralichthys albigutta (Gulf flounder),P. dentatus (summer flounder), andP. lethostigma (southern flounder). Densities and lengths of larvae were significantly different among sampling dates, with distance offshore, and between sides of the inlet. Flood-tide stage had minimal effect on larval densities and lengths except forP. albigutta andP. lethostigma. Changes in larval densities with distance offshore were not coherent among species; densities ofB. tyrammus increased offshore whereas densities of the other species decreased offshore. Average larval densities on a sampling date were coherent among species. Patterns in larval lengths were also coherent among the four non-flounder species. Larval densities outside of Beaufort Inlet were correlated with larval densities inside of Beaufort Inlet. Larval densities outside of Beaufort Inlet were also correlated with the north component of the wind, nearshore water temperature, and distance to the mid-shelf front. Differences in larval density across the inlet were significantly correlated with the east component of the wind. The patterns in larval densities outside of Beaufort Inlet were complex and apparently influenced by both the physical processes that supply larvae to the nearshore region and nearshore physical dynamics.