12 600 years of lake level changes, changing sills, ephemeral lakes and Niagara Gorge erosion in the Niagara Peninsula and Eastern Lake Erie basin

Over the last 12600 years, lake levels in the eastern Lake Erie basin have fluctuated dramatically, causing major changes in drainage patterns, flooding and draining ephemeral Lake Wainfleet several times and widening and narrowing the Niagara Gorge as the erosive effects of Niagara Falls waxed and waned. The control sill for Lake Erie levels was at first the Fort Erie/Buffalo sill, before the Lyell/Johnson sill in Niagara Falls took over due to isostatic rebound. This sill, in time, was eventually eroded by the recession of Niagara Falls and the Fort Erie/Buffalo sill regained control. The environmental picture is complicated by catastrophic outbursts from glacial Lake Agassiz and Lake Barlow-Ojibway, changes in outlet routes, isostatic rebound and climatic changes over the Great Lakes basins. Today, the flow of water into Lake Erie from the streams and rivers surrounding it only accounts for about 13% of the flow out of it, therefore, the importance of flow from the Upper Great Lakes, specifically the flow from Lake Huron, has a great effect on Lake Erie levels. While the changing control sills, Lyell/Johnson and Buffalo/Fort Erie would affect Lake Erie levels, overall they are mostly input driven by the amount of waters received from the Upper Great Lakes. Since Lake Erie's water level changes are so closely tied to Lake Huron's water level changes we have decided to use names assigned to Lake Huron such as the two Mattawa highstands and three Stanley lowstands rather than inflict a whole new set of names on the public. While the duration of each high and lowstand in Erie and Huron may not always be the same, they always happen within the same time frame. The datum elevations used for Lake Huron (175.8 m) and Lake Erie (173.3 m) are historically recorded averages. The Lake Erie levels proposed in this paper reflect Lake Hurons effects on Lake Erie and the levels occuring at the eastern end of the Erie Basin throughout the last 12600 years. All dates in this paper are uncorrected ¹⁴ C dates unless the date was obtained from shells, then the date has been corrected for hard-water effects. Also, all heights are given as modern day elevations and are not adjusted for isostatic rebound.     

COOL AND FRESHWATER SKIN OF THE OCEAN DURING RAINFALL

Rainfall over the sea modifies the molecular boundary layers of the upper ocean through a variety of different effects. These cover the freshwater flux stabilizing the near-surface layer, additional heat flux established due to rain versus surface temperature differences, modification of physical parameters by temperature and salinity changes, enhancement of the surface roughness, damping of short gravity waves, surface mixing by rain, and transfer of additional momentum from air to sea. They are separately described and included in our surface renewal model to investigate the rain's influence on the cool skin of the ocean and the creation of a haline molecular diffusion layer. Simulations with the upgraded model show that the most important effect on the conductive layer is that of reduced renewal periods followed by additional surface cooling due to rain on the order of 0.1 K. At rain rates below 50 mm h-1 rainfall is not able to completely destroy the mean temperature difference across the cool skin. A freshwater skin is created that exhibits a salinity difference exceeding 4 under strong rainfall. Comparisons with field data of the cool skin taken during the Coupled Ocean Atmosphere Response Experiment confirm the upgraded renewal model. Surface salinity measurements taken during the same field campaign are consistent with the calculated salinity differences across the freshwater skin. The enhancement of surface roughness by natural rain is less pronounced than described in earlier laboratory studies of rain with large drop sizes only.     

A new multi‐stage recession model for Proglacial Lake Humber during the retreat of the last British–Irish Ice Sheet

The single most prominent lake associated with the retreat phase of the last British–Irish Ice Sheet (BIIS) was Proglacial Lake Humber. The present research elucidates a revised regional history of Proglacial Lake Humber from its maximum elevation to its demise using a combination of landscape mapping and luminescence dating. The results of mapping multiple Lake Humber strandlines are now best described by an eight‐stage recessional model. Erosional highstands of the lake can be shown to post‐date the BIIS advance that deposited the Skipsea Till at around 17 ka whereas new OSL ages show that Lake Humber was nearing its demise by 15.5±0.8 ka, indicating a possible short‐lived lake. Multiple lake level stands are attributed to the switching of lake outlets from the Lincolnshire Gap to the Humber Gap and to oscillations of the BIIS blocking the latter on more than one occasion and subsequently at a lower elevation with till. The horizontal or near‐horizontal shorelines confirm that isostatic adjustment did not occur during the demise of Lake Humber, indicating that BIIS advances in the North Sea region and Vale of York were not only dynamic but of short duration.     

Complex coastal change in response to autogenic basin infilling: An example from a sub‐tropical Holocene strandplain

Thick bay‐fill sequences that often culminate in strandplain development serve as important sedimentary archives of land–ocean interaction, although distinguishing between internal and external forcings is an ongoing challenge. This study employs sediment cores, ground‐penetrating radar surveys, radiocarbon dates, palaeogeographic reconstructions and hydrodynamic modelling to explore the role of autogenic processes – notably a reduction in wave energy in response to coastal embayment infilling – in coastal evolution and shoreline morphodynamics. Following a regional 2 to 4 m highstand at ca 5·8 ka, the 75 km² Tijucas Strandplain in southern Brazil built from fluvial sediments deposited into a semi‐enclosed bay. Holocene regressive deposits are underlain by fluvial sands and a Pleistocene transgressive–regressive sequence, and backed by a highstand barrier‐island. The strandplain is immediately underlain by 5 to 16 m of seaward‐thickening, fluvially derived, Holocene‐age, basin‐fill mud. Several trends are observed from the landward (oldest) to the seaward (youngest) sections of the strandplain: (i) the upper shoreface and foreshore become finer and thinner and shift from sand‐dominated to mud‐dominated; (ii) beachface slopes decrease from >11° to ca 7°; and (iii) progradation rates increase from 0·4 to 1·8 m yr^?1. Hydrodynamic modelling demonstrates a correlation between progressive shoaling of Tijucas Bay driven by sea‐level fall and sediment infilling and a decrease in onshore wave‐energy transport from 18 to 4 kW m^?1. The combination of allogenic (sediment supply, falling relative sea‐level and geology) and autogenic (decrease in wave energy due to bay shoaling) processes drove the development of a regressive system with characteristics that are rare, if not unique, in the Holocene and rock records. These findings demonstrate the complexities in architecture styles of highstand and regressive systems tracts. Furthermore, this article highlights the diverse internal and external processes and feedbacks responsible for the development of these intricate marginal marine sedimentary systems.     

The effectiveness of high-resolution LiDAR data combined with PSInSAR data in landslide study

The spatial resolution of digital elevation models (DEMs) is an important factor for reliable landslide studies. Multi-interferometric techniques such as persistent scatterer interferometric synthetic aperture radar (PSInSAR) are used to evaluate the landslide state of activity and its ground deformation velocity, which is commonly measured along the satellite line of sight (LOS). In order to compare velocities measured by different satellites in different periods, their values can be projected along the steepest slope direction, which is the most probable direction of real movement. In order to achieve this result, DEM-derived products are needed. In this paper, the effectiveness of different DEM resolutions was evaluated in order to project ground deformation velocities measured by means of PSInSAR technique in two different case studies in the Messina Province (Sicily, southern Italy): San Fratello and Giampilieri. Three DEMs were used: (i) a 20-m resolution DEM of the Italian Military Geographic Institute (IGM), (ii) a 2-m resolution DEM derived from airborne laser scanning (ALS) light detection and ranging (LiDAR) data for the San Fratello 2010 landslide, and (iii) a 1-m resolution DEM derived from ALS LiDAR data for the area of Giampilieri. The evaluation of the applied method effectiveness was performed by comparing the DEMs elevation with those of each single permanent scatterer (PS) and projecting the measured velocities along the steepest slope direction. Results highlight that the higher DEM resolution is more suitable for this type of analysis; in particular, the PS located nearby the watershed divides is affected by geometrical problems when their velocities are projected along the steepest slope.     

Precise and Accurate Doping of Nanoporous Silica Gel for the Synthesis of Trace Element Microanalytical Reference Materials

This study presents an experimental procedure to fabricate high‐purity silica glass containing a selected element at a specified mass fraction. The procedure was used to prepare glasses doped with trace‐level mass fractions of Ti with the goal of improving analytical confidence when measuring trace elements in quartz. Systematic tests were performed to determine the ideal conditions and procedures for doping nanoporous silica gel with the highest efficiency of dopant recovery. Silica gel was cleaned in concentrated HCl, immersed in a non‐polar doping medium at a controlled pH and doped with precise quantities of ICP‐MS standard solution. Using liquids composed of longer chain molecules as the doping medium diminishes recovery, suggesting that large molecules could obstruct nanopores to inhibit capillary uptake of the dopant. A control experiment using crystalline quartz reinforced the effectiveness of nanoporous silica gel for doping with trace‐level precision. Layered aggregates of silica gel doped with different Ti mass fractions were hot‐pressed to create multi‐layered reference materials that were analysed with multiple techniques at a variety of spatial scales. Analyses at the intra‐grain scale (cathodoluminescence scanning electron microscopy, electron probe microanalysis), at the single grain scale (SIMS), at the sample layer scale (EPMA, laser ablation‐ICP‐MS) and at the bulk scale (ICP‐OES) demonstrated acceptable homogeneity at sample volumes characteristic of most microanalysis techniques and show that nanoporous silica gel holds promise as a highly retentive doping substrate for preparing reference materials for laser‐, electron‐ and ion‐beam microanalysis.     

Benthic studies in upper Buzzards Bay,Massachusetts: 2011/12 as compared to 1955

Precise biodiversity mapping that can be compared over decades would greatly inform the discussion of climate change impacts on species richness and shifts in dominant benthic species. Buzzards Bay, Massachusetts, USA, has a long history of field studies documenting benthic community structure. This bioassessment compares 1955 benthic infaunal sampling results with 2011/2012 samples to determine whether there has been a compositional change. I also compared structural components including grain size and near‐bottom temperatures. In addition, benthic temperature rise and fall was logged at 15‐min intervals from May to October of consecutive years. There was an observed difference in the benthic compositional structure, substrate and temperature between the 1955 and 2011/2012 station conditions. The 1955 identification of Buzzards Bay as being nutrient poor and having a reported 20.5 °C benthic temperature maximum has changed. Coastal development has brought increased nutrient inputs, and the 2012 bottom temperature maximum was at least 4 °C greater. These conditions contribute to shifts in benthic species dominance, and the substrate itself has been transformed to shell reefs at the stations where the gastropod Crepidula fornicata proliferated.