Fluorine, a direct indicator of fluorite mineralization in local and regional soil geochemical surveys

Little information is available on the use of fluorine as a direct indicator of fluorite mineralization in geochemical exploration. Until the last five to ten years, analytical methods were generally lacking good precision and were cumbersome, time-consuming and expensive, thus restricting their use in geochemical exploration work. Recently developed, rapid, partial and total fluoride extraction methods with subsequent analysis using the selective-ion electrode have made practicable the use of fluorine as a direct indicator of fluorite mineralization. This paper outlines some results of fluorine studies on soils from the fluorine province of Derbyshire, England. Some partial extraction and total fluoride analytical methods are described. Their applicability to the location of vein fluorite mineralization, concealed below both residual soil and soil developed over transported overburden, is demonstrated. Where drainage is virtually absent and soils offer the only suitable regional sampling medium, as in Derbyshire, England, soil geochemistry is shown to be a reliable tool in reconnaissance exploration work for fluorite deposits.     

Water uptake by two river red gum (Eucalyptus camaldulensis) clones in a discharge site plantation in the Western Australian wheatbelt

The heat-pulse technique was used to estimate year-long water uptake in a discharge zone plantation of 9-year-old clonal Eucalyptus camaldulensis Dehnh. near Wubin, Western Australia. Water uptake matched rainfall closely during weter months but exceeded rainfall as the dry season progressed. Average annual water uptake (1148 mm) exceeded rainfall (432 mm) by about 2.7 fold and approached 56% of pan evaporation for the area. The data suggest that at least 37% (i.e. (1/2.7) × 100) of the lower catchment discharge zone should be planted to prevent the rise of groundwater.

Water uptake varied with soil environment, season and genotype. Upslope trees used more water than did downslope trees. Water uptake was higher in E. camaldulensis clone M80 than in clone M66 until late spring. The difference reversed as summer progressed. Both clones, however, have the potential to dry out the landscape when potential evapotranspiration exceeds rainfall. This variation in water uptake within the species indicates the potential for manipulating plantation uptake by matching tree characteristics to site characteristics.

Controlled experiments on the heat-pulse technique indicated accuracy errors of approximately 10%. This, combined with the ability to obtain long-term, continuous data and the superior logistics of use of the heat-pulse technique, suggests that results obtained by it would be much more reliable than those achieved by the ventilated chamber technique.     

A dislocation model applied to slump structures, Ainsa Basin, South Central Pyrenees

Features associated with gravity-induced slumping in deep-water Eocene sediments of the Ainsa basin are described and four aspects are selected as being especially significant. These are: extensional strain, contractional strain, strain overprinting and clastic dykes. Slump strain is interpreted as a consequence of the initiation, translation and termination phases of slump development and is explained in terms of a dislocation model. The initial phase of development involves the propagation of a failure through undisturbed sediment and this imparts a characteristic strain above the décollement surface. Translation of the failed body involves sequential velocity changes which also deform the moving sediment. During the termination phase a type of dislocation, here named an anti-dislocation, migrates along the basal failure when a slump regains cohesion with the substrate. Clastic dykes are interpreted as dewatering structures initiating at basal faults which have associated high pore fluid pressure. Dewatering of slumped décollement sheets may be a significant phase in the termination of movement of failed sediment bodies.     

The Development of the Chagas' Online Data Entry System (CODES-GIS)

This article describes a web‐based data entry and GIS‐driven mapping system designed for an ethnographic and entomological survey of Chagas’ disease, an emerging zoonotic disease, and Triatoma dimidiata, a primary vector, in the Los Tuxtlas region of Veracruz, Mexico. To better understand this disease in the region, a collaborative, multi‐disciplinary study was initiated to conduct a spatial investigation of T. dimidiata and a community‐by‐community survey of local perceptions of the disease. In order to facilitate such a collaborative effort the CODES‐GIS was developed. This system allows for (near) real‐time mapping, analyses, disease reporting, and results sharing. CODES‐GIS provides a framework for a research team working in a remote area with limited technology, software, or GIS expertise to benefit from (near) real‐time spatial analyses performed at collaborating institutions. The system is bi‐directional, where field personnel can upload data to the system for field‐based map production. Likewise, laboratory personnel can upload diagnostics data for viewing by field personnel. In this way, the system provides a virtual link between the field and the laboratory to increase the speed at which results are returned to the local community. The CODES‐GIS is described along with a selection of study results.     

The age and growth of hottentot seabream Pachymetopon blochii before and after the South African linefish state of emergency in 2000

The hottentot seabream Pachymetopon blochii is a small-sized (maximum 2.67 kg) sparid endemic to southern Africa. It is an important target in South Africa's Western Cape traditional linefishery, particularly in the absence of more valuable pelagic species (such as Thyrsites atun and Seriola lalandi). In 2000, South Africa's linefishery was declared to be in a state of emergency, and commercial fishing effort was consequently reduced by 70%. A subsequent increase in stock biomass and intraspecific competition, coupled with environmental changes, were hypothesised to have thereafter altered the growth rate of hottentot, from 2000 to 2010. This study aimed to revise outdated age–growth models for the hottentot by using modern techniques (sectioned otoliths), and to compare age–growth relationships before and after the declared linefish state of emergency. The maximum age observed was 19 years, with no difference in the growth rate between sexes (p = 0.39–0.43) or time-periods (p = 0.96). Although the growth rate did not change, there is evidence that the age structure of the stock changed between time-periods as a result of changes in fishing pressure between 2000 and 2010. The enhanced recent growth model for hottentot, described as L_t = 418.063 (1 – e^{?0.104(t – [?4.709])}) (pooled sexes; n = 206), indicates a considerably slower growth rate for this species than was proposed previously using whole otoliths and has major implications for effective stock management.     

Self-consistent equilibrium ocean tides

Summary. We compute the static response of the world ocean to an external zonal gravitational potential. The computation includes the effects of the self-attraction of the ocean, and the yielding of the Earth caused both by the external potential and the change in ocean load. We compare the computed tide with measurements of the fortnightly and monthly ocean tides. The short-wavelength departures from equilibrium found by Wunsch are still present. An average of observations at Pacific islands shows that the fortnightly tide departs significantly from equilibrium but the monthly may not. We have also calculated the effects of our computed tide on measurements of tidal gravity and tidal fluctuations in the length of day. Existing tidal gravity data are too imprecise to enable us to determine whether or not the spatial average of the ocean tides departs from equilibrium. The length of day data suggest that the monthly tide is farther from equilibrium than the fortnightly. We have not been able to resolve the apparent discrepancy between the length of day and ocean tide data.     

Zooplankton succession during extraordinary drought–flood cycles: A case study in a South American floodplain lake

We examined the zooplankton abundance and composition of Laguna Grande, a floodplain wetland of the Lower Paraná Basin (Argentina), during an extraordinary drought–flood cycle that affected both the environment and the biological conditions of the lake. Low waters were characterised by remarkably high conductivities and pH values, and high phytoplankton and bacterioplankton abundances with cyanobacterial blooms, while high waters showed opposite features. In relation to zooplankton, the mean abundances of all the taxonomic groups (rotifers, cladocerans, copepods, ciliates, and heterotrophic nanoflagellates) were slightly higher at low waters. Major changes were observed in the specific composition of metazooplankton: the euryhaline species assemblage that dominated in the dry warm period was replaced by several oligohaline littoral and planktonic species characteristic of the Paraná River Basin, when the water level rose. Mean species richness values at high waters doubled those of low waters and were directly correlated to water depth. Most of the rotifers of the genus Brachionus and the cladoceran Moina micrura switched from parthenogenetic to sexual reproduction during low waters, as a response to a harsh environment and crowding. We suggest that the main changes in the environmental conditions in this eutrophic floodplain lake are driven by the hydrology, which regulates the zooplankton succession. The herein described shifts in the zooplankton structure and dynamics of Laguna Grande over an extraordinary drought–flood cycle contribute to the understanding of the processes that might occur under the scenarios predicted by climate change models.     

A polarimetric spectral imager using acousto-optic tunable filters

We report laboratory and telescopic observations with a polarimetric spectral imager based on an acousto-optic tunable filter (AOTF) where we demonstrate simultaneous acquisition of orthogonally polarized images at a spectral resolving power on the order of 103 and at a Rayleigh criterion spatial resolution of 100 line pairs per mm. This matches the spatial resolution of most digital arrays. An AOTF is shown to be usable as a fast shutter with a contrast of over 10⁴ on a sub-millisecond time scale while providing an high transmittance of about 75% (both polarizations summed) when illuminated by white light. The polarization contrast between the orthogonally polarized images exceeds 10⁴ across the field of view, permitting accurate measurement of the polarization parameters of incident light. These characteristics are now being used in a program of high spatial resolution imaging in narrow spectral bands. Some peculiarities and limitations of AOTFs are indicated.This research was supported by NASA under Grant NAGW-122 and under contract with the Jet Propulsion Laboratory under NASA grant NAS 7-918.Visiting Astronomer, Mauna Kea Observatory.     

The electromagnetic pickup of submicron-sized dust above Enceladus’s northern hemisphere

As the saturnian magnetoplasma sweeps past Enceladus, it experiences both a decrease in electron content and sharp slowdown in the northern hemisphere region within ～5 Enceladus Radii (R_e). This slowdown is observed by Cassini in regions not obviously associated with the southern directed plume-originating ions. We suggest herein that the decrease in northern hemisphere electron content and plasma slowdown could both be related to the presence of fine dust grains that are being accelerated by the Lorentz force created within the saturnian magnetic field system.     

Modelling of fluid–solid interactions using an adaptive mesh fluid model coupled with a combined finite–discrete element model

Fluid–structure interactions are modelled by coupling the finite element fluid/ocean model ‘Fluidity-ICOM’ with a combined finite–discrete element solid model ‘Y3D’. Because separate meshes are used for the fluids and solids, the present method is flexible in terms of discretisation schemes used for each material. Also, it can tackle multiple solids impacting on one another, without having ill-posed problems in the resolution of the fluid’s equations. Importantly, the proposed approach ensures that Newton’s third law is satisfied at the discrete level. This is done by first computing the action–reaction force on a supermesh, i.e. a function superspace of the fluid and solid meshes, and then projecting it to both meshes to use it as a source term in the fluid and solid equations. This paper demonstrates the properties of spatial conservation and accuracy of the method for a sphere immersed in a fluid, with prescribed fluid and solid velocities. While spatial conservation is shown to be independent of the mesh resolutions, accuracy requires fine resolutions in both fluid and solid meshes. It is further highlighted that unstructured meshes adapted to the solid concentration field reduce the numerical errors, in comparison with uniformly structured meshes with the same number of elements. The method is verified on flow past a falling sphere. Its potential for ocean applications is further shown through the simulation of vortex-induced vibrations of two cylinders and the flow past two flexible fibres.