Bizarre geochemistry of komatiites from the Crixás greenstone belt,Brazil

Komatiite lava flows in the Crixás greenstone belt, Goiás, Brazil, have textures and volcanic structures typical of Archean komatiites, but are geochemically most unusual. The flows are porphyritic and massive, or layered with spinifex upper parts and olivine cumulate lower parts. MgO contents range from 18 to 40%. In such lavas, only olivine (and minor chromite) can have crystallized, but neither major nor trace elements fall on olivine control lines. In MgO variation diagrams, CaO and Sr fall on lines with slopes steeper than olivine control lines; SiO₂, FeO, Na₂O, K₂O and Y show little systematic variation; Zr shows a large variation that does not correlate with MgO; and Al₂O₃ decreases markedly with decreasing MgO. The aberrant behaviour is highlighted by the REE (rare earth elements) in spinifex and olivine cumulate layers from three flows: in the spinifex layers, chondrite-normalized REE patterns are hump-shaped with maxima at Nd or Sm ((La/Sm)_N=0.6, (Gd/Yb)_N=1.6–2.3), whereas cumulate zones in the same flows have steadily sloping patterns, with LREE enriched relative to HREE ((La/Sm)_N=1.3, (Gd/Yb)_N=1.4). Neither normal magmatic processes acting during emplacement of the komatiites, nor thermal erosion and wall-rock assimilation can explain these effects, and we speculate that elements commonly thought of as “immobile” (e.g. Al, Zr, REE) migrated during hydrothermal alteration or metamorphism. A Pb-Pb whole rock isochron gave an age of 2,728±140 Ma and selected Sm-Nd analyses an apparent isochron age of 2,825±98 Ma (ɛ_Nd≈0). The Pb-Pb age is believed to be the approximate time of emplacement. Interpretation of the Sm-Nd data is complicated by the evidence of mobility of REE.     

泥盆纪最早期牙形刺带化石在蒙古南戈壁幕使盖(Mushgai)地区尕屋(Gavuu)段的首次发现

在蒙古南戈壁的Bayan—Khoshuu Ruins剖面原归入到志留系Mandalovoo组尕屋(Gavuu)段的地层中发现了牙形刺Caudicriodus woschimidti woschmidti,这是泥盆纪最早期牙形刺带化石在蒙古的首次发现。尕屋(Gavuu)段的下部属志留系,但其上部,即采集牙形刺样品M-9～M-12的层位肯定属下泥盆统(下洛霍考夫阶),而不是下志留统。Mandalovoo组应当改为Mandalovoo群,它的三个段应提升为三个组。     

Induced Microearthquake Patterns in Hydrocarbon and Geothermal Reservoirs: Six Case Studies

—?The injection or production of fluids can induce microseismic events in hydrocarbon and geothermal reservoirs. By deploying sensors downhole, data sets have been collected that consist of a few hundred to well over 10,000 induced events. We find that most induced events cluster into well-defined geometrical patterns. In many cases, we must apply high-precision, relative location techniques to observe these patterns. At three sedimentary sites, thin horizontal strands of activity are commonly found within the location patterns. We believe this reflects fracture containment between stratigraphic layers of differing mechanical properties or states of stress. At a massive carbonate and two crystalline sites, combinations of linear and planar features indicate networks of intersecting fractures and allow us to infer positions of aseismic fractures through their influence on the location patterns. In addition, the fine-scale seismicity patterns often evolve systematically with time. At sedimentary sites, migration of seismicity toward the injection point has been observed and may result from slip-induced stress along fractures that initially have little resolved shear. In such cases, triggering events may be critical to generate high levels of seismic activity. At one crystalline site, the early occurrence of linear features that traverse planes of activity indicate permeable zones and possible flow paths within fractures. We hope the continued development of microseismic techniques and refinement of conceptual models will further increase our understanding of fluid behavior and lead to improved resource management in fractured reservoirs.     

Pre‐ and post‐impoundment nitrogen in the lower Missouri River

Large water‐sample sets collected from 1899 through 1902, 1907, and in the early 1950s allow comparisons of pre‐impoundment and post‐impoundment (1969 through 2008) nitrogen concentrations in the lower Missouri River. Although urban wastes were not large enough to detectably increase annual loads of total nitrogen at the beginning of the 20^th century, carcass waste, stock‐yard manure, and untreated human wastes measurably increased ammonia and organic‐nitrogen concentrations during low flows. Average total‐nitrogen concentrations in both periods were about 2.5 mg/l, but much of the particulate‐organic nitrogen, which was the dominant form of nitrogen around 1900, has been replaced by nitrate. This change in speciation was caused by the nearly 80% decrease in suspended‐sediment concentrations that occurred after impoundment, modern agriculture, drainage of riparian wetlands, and sewage treatment. Nevertheless, bioavailable nitrogen has not been low enough to limit primary production in the Missouri River since the beginning of the 20^th century. Nitrate concentrations have increased more rapidly from 2000 through 2008 (5 to 12% per year), thus increasing bioavailable nitrogen delivered to the Mississippi River and affecting Gulf Coast hypoxia. The increase in nitrate concentrations with distance downstream is much greater during the post‐impoundment period. If strategies to decrease total‐nitrogen loads focus on particulate N, substantial decreases will be difficult because particulate nitrogen is now only 23% of total nitrogen in the Missouri River. A strategy aimed at decreasing particulates also could further exacerbate land loss along the Gulf of Mexico, which has been sediment starved since Missouri River impoundment. In contrast, strategies or benchmarks aimed at decreasing nitrate loads could substantially decrease nitrogen loadings because nitrates now constitute over half of the Missouri's nitrogen input to the Mississippi. Ongoing restoration and creation of wetlands along the Missouri River could be part of such a nitrate‐reduction strategy. Published 2013. This article is a U.S. Government work and is in the public domain in the USA.     

A benchmark comparison of numerical methods for infinite Prandtl number thermal convection in two-dimensional Cartesian geometry

Abstract

A comparison is made between seven different numerical methods for calculating two-dimensional thermal convection in an infinite Prandtl number fluid. Among the seven methods are finite difference and finite element techniques that have been used to model thermal convection in the Earth's mantle. We evaluate the performance of each method using a suite of four benchmark problems, ranging from steady-state convection to intrinsically time-dependent convection with recurring thermal boundary layer instabilities. These results can be used to determine the accuracy of other computational methods, and to assist in the development of new ones.     

Zur Geometrie der geologischen Falten

Zusammenfassung Zylindrische, konische, tangentenflächige und nicht-abwickelbare Falten werden geometrisch beschrieben. Die Beziehungen zwischen Falte und Lagenkugeldiagramm werden untersucht, wobei folgende Gesetzmäßigkeiten abgeleitet werden: die Schichtflächenpole (s-Pole) zylindrisch gefalteter Schichtflächen beschreiben im Lagenkugeldiagramm einen-Großkreis. Ist die gefaltete Schichtfläche konisch ausgebildet oder stellt sie eine Tangentenfläche dar, so ordnen sich dies-Pole i. allg. auf einer-Kurve. Wenn die gefaltete Schichtfläche nicht abwickelbar ist, kommen die s-Pole im Lagenkugeldiagramm auf einer-Fläche zu liegen. Die zylindrischen und konischen Falten können geometrisch als Spezialfälle der tangentenflächigen Falten betrachtet werden. Im Hinblick auf die jeweilige Lage von Achsenebene und Mittelebene wird zwischen bisektalen und abisektalen Falten unterschieden.

---

The geometry of cylindrical, concal, tangent surface and non-developable folds is described. The relations between folds and corresponding orientation diagrams are investigated and the following conclusions are deducted: thes-poles of a cylindrically folded surface describe a-great circle in the orientation diagram. If, however, the folded surface is conical or a tangent surface, thes-poles generally coincide with a-curve. In case the folded surface is not developable, the s-poles fall on a-area in the orientation diagram. With respect to the geometrical form, cylindrical and conical folds may be considered as special cases of tangent surface folds. The relations between the axial plane and the bisecting plane of geological folds are investigated.

---

Résumé La géométrie des plis cylindriques et coniques, des plis de surface tangentielle et des plis non-développables est décrite. Les relations entre les plis et les diagrammes de figuration sphérique sont examinées avec les résultats suivants: si une surface plissée est cylindrique, les pôles s de plans de stratification forment un grand cercle dans le diagramme. Dans le cas où la surface plissée est du type conique ou une surface tangentielle, les pôles s coincident en général avec une courbe. Les pôles d'une surface non-développable tombent dans une aire du diagramme. En ce qui concerne la forme géométrique on peut regarder les plis cylindriques et coniques comme des cas speciaux de plis de surface tangentielle. La position du plan axial et du plan médian des plis est chaque fois examinée quant à son caractère bissequant ou non.

---

, , . : (S-Pole) . , , S . , . , . .

     

Lead-210 and pollen geochronologies on Lake Superior sediments

Rates of sedimentation in two Lake Superior deposits were determined by both ragweed pollen and ²¹⁰Pb geochronologies. The former yields an average rate over the time since the first appearance of enhanced concentrations of the pollen as a consequence of human settlement. Sedimentation rates derived on these two bases can be brought into accord if the first appearance of ragweed pollen in the sediments was around 1830 and if the sedimentation rates have been uniform over the past century.     

Delineating low-arsenic groundwater environments in the Bengal Aquifer System, Bangladesh

Studies within the As-affected Bengal Basin have indicated that low-As groundwater can be found in a variety of geological and geomorphological settings. The hydrogeological environments that host low-As groundwater may be interpreted within a geological framework determined by the Quaternary evolution of the Bengal Aquifer System (BAS). This provides the basis for delineating the position and extent of shallow low-As groundwater, low-As groundwater in oxidised ‘red-bed’ sediments, and deep low-As groundwater. Data available on a national scale allow a preliminary delineation of these low-As groundwater environments across Bangladesh, based on empirical associations of low-As groundwater occurrences with topography, water table elevation, surface sediment lithology, geology and the screen depth of deep wells in low-As zones.     

A subduction wedge origin for Paleoarchean peridotitic diamonds and harzburgites from the Panda kimberlite, Slave craton: evidence from Re–Os isotope systematics

An extensive study of peridotitic sulfide inclusion bearing diamonds and their prospective harzburgitic host rocks from the 53 Ma Panda kimberlite pipe, Ekati Mine, NWT Canada, has been undertaken with the Re–Os system to establish their age and petrogenesis. Diamonds with peridotitic sulfide inclusions have poorly aggregated nitrogen (<30% N as B centers) at N contents of 200–800 ppm which differs from that of chromite and silicate bearing diamonds and indicates residence in the cooler portion of the Slave craton lithospheric mantle. For most of the sulfide inclusions, relatively low Re contents (average 0.457 ppm) and high Os contents (average 339 ppm) lead to extremely low ¹⁸⁷Re/¹⁸⁸Os, typically << 0.05. An age of 3.52 ± 0.17 Ga (MSWD = 0.46) and a precise initial ¹⁸⁷Os/¹⁸⁸Os of 0.1093 ± 0.0001 are given by a single regression of 11 inclusions from five diamonds that individually provide coincident internal isochrons. This initial Os isotopic composition is 6% enriched in ¹⁸⁷Os over 3.5 Ga chondritic or primitive mantle. Sulfide inclusions with less radiogenic initial Os isotopic compositions reflect isotopic heterogeneity in diamond forming fluids. The harzburgites have even lower initial ¹⁸⁷Os/¹⁸⁸Os than the sulfide inclusions, some approaching the isotopic composition of 3.5 Ga chondritic mantle. In several cases isotopically distinct sulfides occur in different growth zones of the same diamond. This supports a model where C–O–H–S fluids carrying a radiogenic Os signature were introduced into depleted harzburgite and produced diamonds containing sulfides conforming to the 3.5 Ga isochron. Reaction of this fluid with harzburgite led to diamonds with less radiogenic inclusions while elevating the Os isotope ratios of some harzburgites. Subduction is a viable way of introducing such fluids. This implies a role for subduction in creating early continental nuclei at 3.5 Ga and generating peridotitic diamonds.Electronic Supplementary Material Supplementary material is available for this article at and is accessible for authorized users.