A fast response,open path,infrared hygrometer,using a semiconductor source

Investigations were carried out as to the feasibility of using a semiconductor source in the design of a new rapid response, open-path hygrometer. A single-beam instrument was constructed employing an infrared light emitting diode (LED) as a source instead of the usual high energy, wideband filament. The spectral emission envelope encompassed the 1.87 m water absorption band. Electronic modulation and thermoelectrical cooling of the diode eliminated the conventional chopper wheel and stabilized the peak wavelength emission. Path length was 200 mm. Over a water vapour concentration range of 0–16 g m^–3, absorption varied by 2% in a linear fashion. At 10 Hz, the noise level was 0.1 g m^–3 rms. Hygrometer resolution and stability are constrained by the detector noise level, the small source emission in the absorption band and low frequency drift in the optical filter. Despite these problems, the new instrument showed comparable performance characteristics to a commercial Lyman- hygrometer. Latent heat fluxes measured with both instruments and a Kaijo-Denki, 3-D sonic anemometer agreed to within 4% over a range 0–350 W m^–2. Further improvements in performance can be anticipated with advances in detector and LED technology.     

Powder- and single crystal Mössbauer spectroscopy on synthetic fayalite

Mössbauer measurements on synthetic iron orthosilicate Fe₂SiO₄ (fayalite) were carried out in the antiferromagnetic spin state below T _N 65 K. The Mössbauer parameters isomer shift , inner magnetic field H(0), angle between H(0) and the z-component of the electric field gradient (efg), quadrupole splitting QS and asymmetry parameter were determined as a function of temperature. These parameters could be attributed to the two crystallographic sites M1 and M2.The smaller isomer shift on M1 with respect to M2 displays the more covalent character of the Fe-O bond on M1, which is supported by previous neutron diffraction experiments. H(0) shows a Brillouin-type behaviour with different fields on the two crystallographic sites (stronger on M1) and a small discontinuity at T = 23 K which corresponds with previous magnetic measurements. The quadrupole splitting is equal on both sites within error bars, in agreement with previous theoretical results and in contradiction to previous Mössbauer refinements published elsewhere.     

Room temperature solid-state detectors for Gamma ray burst spectroscopy

We have evaluated several solid state detectors which offer excellent energy resolution at room temperature for soft X-rays. For soft X-rays (< 1 keV to 20 keV), silicon P-intrinsic-N (PIN) and avalanche-mode photodiodes (APD's) have been studied. Using commercially available charge sensitive pre-amplifiers, these photodiodes provide 1 keV resolution without cooling. Their detection efficiencies are limited to about 20 keV and 15 keV, respectively. To overcome this constraint, we have studied thick (1.5 mm) PIN detectors made by Micron Semiconductor Ltd., U.K., as well as compound semiconducting materials with high Z constituents such as CZT and PbI₂. PbI₂ allows high detection efficiencies of photons up to 100 keV with detectors 100–300 microns thick. These new detectors offer the capability to study the low-energy spectral evolution of Gamma ray bursts (GRBs). A matrix of these detectors could be used as an image plane detector with moderate spatial resolution for imaging.     

Search for low energyν e,μ,τ andv e,μ,τ in coincidence with BATSE gamma ray bursts

A search for low energy neutrinos of all flavours in correlation with 553 ray bursts detected by BATSE aboard the Compton Observatory has been performed by the LSD (Liquid Scintillator Detector) neutrino telescope. No excess ofe,, orv _e,, candidate has been detected by LSD during the time interval in which BATSE detected the 90% of the photon flux for any of the GRBs analyzed. Upper limits on the neutrino fluxes are given in the paper.     

The fir emission of dust particles around c-rich IRAS sources

The spectra of 26 IRAS sources have been fitted using experimental optical data obtained in our laboratory for different types of carbon and silicon carbide (SiC) submicronic particles. Laboratory data are the main input for a radiative transfer model, which, taking into account several important parameters of the circumstellar matter and of the central star, evaluates the temperature gradient across the envelope and hence the emission best-fit spectrum. In this way it has been possible to fit, with good accuracy, most of the examined IRAS spectra in the range 8 - 100µm. The sources have been chosen among those showing SiC feature around 11µm and the best fits have been obtained by carefully assessing the amount and the type ( &) of SiC particles present in the grain mixtures.     

New kinematic distances of NGC 7009 and BD+30°3639 from UV and radio data

Measurements of the equivalent width of the interstellar Lyman line from IUE spectra in the direction of the planetary nebulae NGC 7009 and BD+30°3639 are used to infer the H column density in these directions. Hydrogen 21 cm profiles are also used in connection with the ultraviolet data so that the expected rotation velocities and distances can be determined. The results are compared with recently published distances, in an attempt to distinguish between the short and long PN distance scales as applied to these objects.     

Electromagnetic bursting of a rapidly rotating magnetized neutron star in a close binary system

We examine a possible manifestation of the electromagnetic activity of a magnetized, rotating neutron star in a binary system. Accreting matter from the companion is initially accumulated at the magnetosphere. When the accumulated mass is such that the inflow can start, together with the accretion flare there will be a burst due to the closure of electric currents. The luminosity associated to the latter effect may be as large as 10⁴² erg/s, if a neutron star possesses the following characteristics: massM =M , period of rotationP = 5 ms, magnetic fieldB ₀ = 10¹² G, and radiusr ₀ = 10⁶ cm. The electromagnetic activity might be relevant for understanding soft gamma ray repeaters.     

On the use of ‘first spotless day’ as a predictor for sunspot minimum

Defining the first spotless day of a sunspot cycle as the first day without spots relative to sunspot maximum during the decline of the solar cycle, one finds that the timing of that occurrence can be used as a predictor for the occurrence of solar minimum of the following cycle. For cycle 22, the first spotless day occurred in April 1994, based on the International sunspot number index, although other indices (Boulder and American) indicated the first spotless day to have occurred earlier (September 1993). For cycles 9–14, sunspot minimum followed the first spotless day by about 72 months, having a range of 62–82 months; for cycles 15–21, sunspot minimum followed the first spotless day by about 35 months, having a range of 27–40 months. Similarly, the timing of first spotless day relative to sunspot minimum and maximum for the same cycle reveals that it followed minimum (maximum) by about 69 (18) months during cycles 9–14 and by about 90 (44) months during cycles 15–21. Accepting April 1994 as the month of first spotless day occurrence for cycle 22, one finds that it occurred 91 months into the cycle and 57 months following sunspot maximum. Such values indicate that its behavior more closely matches that found for cycles 15–21 rather than for cycles 9–14. Therefore, one infers that sunspot minimum for cycle 23 will occur in about 2–3 years, or about April 1996 to April 1997. Accepting the earlier date of first spotless day occurrence indicates that sunspot minimum for cycle 23 could come several months earlier, perhaps late 1995.The U.S. Government right to retain a non-exclusive, royalty free licence in and to any copyright is acknowledged.     

An examination of directional discontinuities and magnetic polarity changes around interplanetary sector boundaries usingE > 2 keV electrons

Past studies of interplanetary magnetic sector boundaries have been based on the assumption that one can determine the field polarities by comparing the field directions with those of the nominal Parker spiral angles. Previous investigators have found evidence for decreases of B, the magnitude of the magnetic fieldB, and increases of , the angle betweenB and the ecliptic plane, at sector boundaries. Others have argued that the characteristic thickness of sector boundaries exceeds that of tangential discontinuities, making sector boundaries a separate class of structures.We use a simple technique for inferring the polarities of interplanetary magnetic fields based on the assumption thatE > 2 keV electrons are always flowing along the magnetic field away from the Sun. Electron data from the UC Berkeley experiment on the ISEE-3 spacecraft are used to examine periods around several apparent sector boundaries in 1978 and 1979. We compare properties of (a) boundaries with field polarity changes and (b) large-angle ( > 60°) directional discontinuities with no field polarity changes. We find no significant differences between the sector boundaries and the directional discontinuities in terms of associated decreases in B or of values of . These results suggest no significant difference between sector boundaries and directional discontinuities other than the change in field polarities. Within limited statistics we find that about half the polarity changes would not have been identified using a requirement that > 90° and that half of the > 120° discontinuities would have been misidentified as polarity changes.     

On the internal structure and magnetic fields of

First, a sequence of four-zone models for the interior of Venus is constructed under the assumption of hydrostatic equilibrium. While the equation of state for each zone is taken to be the Bullen's relation with its coefficients consistent with the PREM Earth model (Dziewonski and Anderson, 1981), the position of core-mantle boundary is determined by matching solutions of the Emden's equation in different regions. The results of hydrostatic models indicate the presence of a reasonably large molten iron core in Venus, broadly similar to the Earth. It is also found that the position of the core-mantle interface is nearly model-independent. Second, we focus on the question why Venus does not possess a significant global magnetic field and on what we can learn from this fact. Solutions of magnetohydrodynamic equations appropriate for the molten core of Venus are discussed. It is argued that, because the Elsasser number measuring the relative importance of Coriolis and Lorentz forces satisfies 1, equations for the problem of thermal convection in the Venusian fluid core must be nearly uncoupled with the dynamo equation. The existence of a global magnetic field, though small, then suggests that the size of the magnetic Reynolds numberR _m must beR _m =O(10), sustaining a dynamo action near its marginal state but not an active dynamo in the Venusian molten core. On the basis of asymptotic relations for finite amplitude convection, a useful constraint on important physical parameters for the liquid core of Venus is derived and discussed.