湘江中下游农田土壤和蔬菜的重金属污染

A total of 219 agricultural soil and 48 vegetable samples were collected from the midstream and downstream of the Xiangjiang River（the Hengyang-Changsha section）in Hunan Province.The accumulation characteristics,spatial distribution and potential risk of heavy metals in the agricultural soils and vegetables were depicted.There are higher accumulations of heavy metals such as As,Cd,Cu,Ni,Pb and Zn in agricultural soils,and the contents of Cd（2.44 mg kg^-1 ）,Pb（65.00 mg kg^-1 ）and Zn（144.13 mg kg^-1 ）are 7.97,3.69 and 1.63 times the corresponding background contents in soils of Hunan Province,respectively. 13.2%of As,68.5%of Cd,2.7%of Cu,2.7%of Ni,8.7%of Pb and 15.1%of Zn in soil samples from the investigated sites exceeded the maximum allowable heavy metal contents in the China Environmental Quality Standard for Soils（GB15618-1995,Grade Ⅱ）.The pollution characteristics of multi-metals in soils are mainly due to Cd.The contents of As,Cd,Cu,Pb and Zn in vegetable soils are significantly higher than the contents in paddy soils.95.8%, 68.8%,10.4%and 95.8%of vegetable samples exceeded the Maximum Levels of Contaminants in Foods（GB2762-2005）for As,Cd,Ni and Pb concentrations,respectively.There are significantly positive correlations between the concentrations of Cd,Pb and Zn in vegetables and the concentrations in the corresponding vegetable soils（p〈0.01）.It is very necessary to focus on the potential risk of heavy metals for food safety and human health in agricultural soils and vegetables in the midstream and downstream of the Xiangjiang River,Hunan Province of China.     

Net Energy Payback and CO2 Emissions from Three Midwestern Wind Farms: An Update

This paper updates a life-cycle net energy analysis and carbon dioxide emissions analysis of three Midwestern utility-scale wind systems. Both the Energy Payback Ratio (EPR) and CO₂ analysis results provide useful data for policy discussions regarding an efficient and low-carbon energy mix. The EPR is the amount of electrical energy produced for the lifetime of the power plant divided by the total amount of energy required to procure and transport the materials, build, operate, and decommission the power plants. The CO₂ analysis for each power plant was calculated from the life-cycle energy input data. A previous study also analyzed coal and nuclear fission power plants. At the time of that study, two of the three wind systems had less than a full year of generation data to project the life-cycle energy production. This study updates the analysis of three wind systems with an additional four to eight years of operating data. The EPR for the utility-scale wind systems ranges from a low of 11 for a two-turbine system in Wisconsin to 28 for a 143-turbine system in southwestern Minnesota. The EPR is 11 for coal, 25 for fission with gas centrifuge enriched uranium and 7 for gaseous diffusion enriched uranium. The normalized CO₂ emissions, in tonnes of CO₂ per GW_eh, ranges from 14 to 33 for the wind systems, 974 for coal, and 10 and 34 for nuclear fission using gas centrifuge and gaseous diffusion enriched uranium, respectively.     

The assessment of landslide susceptibility mapping using random forest and decision tree methods in the Three Gorges Reservoir area,China

Landslide susceptibility mapping is an indispensable prerequisite for landslide prevention and reduction. At present, research into landslide susceptibility mapping has begun to combine machine learning with remote sensing and geographic information system (GIS) techniques. The random forest model is a new integrated classification method, but its application to landslide susceptibility mapping remains limited. Landslides represent a serious threat to the lives and property of people living in the Zigui–Badong area in the Three Gorges region of China, as well as to the operation of the Three Gorges Reservoir. However, the geological structure of this region is complex, involving steep mountains and deep valleys. The purpose of the current study is to produce a landslide susceptibility map of the Zigui–Badong area using a random forest model, multisource data, GIS, and remote sensing data. In total, 300 pre-existing landslide locations were obtained from a landslide inventory map. These landslides were identified using visual interpretation of high-resolution remote sensing images, topographic and geologic data, and extensive field surveys. The occurrence of landslides is closely related to a series of environmental parameters. Topographic, geologic, Landsat-8 image, raining data, and seismic data were used as the primary data sources to extract the geo-environmental factors influencing landslides. Thirty-four layers of causative factors were prepared as predictor variables, which can mainly be categorized as topographic, geological, hydrological, land cover, and environmental trigger parameters. The random forest method is an ensemble classification technique that extends diversity among the classification trees by resampling the data with replacement and randomly changing the predictive variable sets during the different tree induction processes. A random forest model was adopted to calculate the quantitative relationships between the landslide-conditioning factors and the landslide inventory map and then generate a landslide susceptibility map. The analytical results were compared with known landslide locations in terms of area under the receiver operating characteristic curve. The random forest model has an area ratio of 86.10%. In contrast to the random forest (whole factors, WF), random forest (12 major factors, 12F), decision tree (WF), decision tree (12F), the final result shows that random forest (12F) has a higher prediction accuracy. Meanwhile, the random forest models have higher prediction accuracy than the decision tree model. Subsequently, the landslide susceptibility map was classified into five classes (very low, low, moderate, high, and very high). The results demonstrate that the random forest model achieved a reasonable accuracy in landslide susceptibility mapping. The landslide hazard zone information will be useful for general development planning and landslide risk management.     

Effective sea ice area based on a thickness threshold

As Arctic sea ice declines in response to climate change, a shift from thick multiyear ice to a thinner ice cover is occurring. With this transition, ice thicknesses approach a threshold below which ice no longer insulates the atmosphere from oceanic surface fluxes. While this is well known, there are no estimates of the magnitude of this threshold, nor of the proportion of sea ice area that is below this threshold as ice thins. We determine this threshold by simulating the atmospheric response to varying thicknesses, ranging from 0.0 to 2.0 m and determine that threshold to be 0.40–0.50 m. The resulting “effective” ice area is 4–14% lower than reported total ice area, as 0.39–0.97 × 10⁶ km² of the total ice area falls below the threshold throughout the twentieth century, including during notable ice minima. The atmosphere above large non-insulating ice-covered regions is susceptible to more than 2 °C of warming despite ice presence. Observed mean Arctic Ocean ice thickness is projected to fall below this threshold as early as the mid-2020s. Studies on ocean–atmosphere interactions in relation to sea ice area should focus on this insulating sea ice area, where ice is at least 0.40–0.50 m thick, and treat ice regions below 0.40–0.50 m thickness with caution.

     

Impact of satellite observed microwave SST on the simulation of tropical cyclones

The impact of realistic representation of sea surface temperature (SST) on the numerical simulation of track and intensity of tropical cyclones formed over the north Indian Ocean is studied using the Weather Research and Forecast (WRF) model. We have selected two intense tropical cyclones formed over the Bay of Bengal for studying the SST impact. Two different sets of SSTs were used in this study: one from TRMM Microwave Imager (TMI) satellite and other is the weekly averaged Reynold’s SST analysis from National Center for Environmental Prediction (NCEP). WRF simulations were conducted using the Reynold’s and TMI SST as model boundary condition for the two cyclone cases selected. The TMI SST which has a better temporal and spatial resolution showed sharper gradient when compared to the Reynold’s SST. The use of TMI SST improved the WRF cyclone intensity prediction when compared to that using Reynold’s SST for both the cases studied. The improvements in intensity were mainly due to the improved prediction of surface latent and sensible heat fluxes. The use of TMI SST in place of Reynold’s SST improved cyclone track prediction for Orissa super cyclone but slightly degraded track prediction for cyclone Mala. The present modeling study supports the well established notion that the horizontal SST gradient is one of the major driving forces for the intensification and movement of tropical cyclones over the Indian Ocean.     

Zur Tektonik des mittleren Südwestafrika

Zusammenfassung Der Gesteinsuntergrund des mittleren Südwestafrika weist eine NO-SW gerichtete Struktur auf. Nahezu sämtliche Bewegungs-Vorgänge vom ältesten Archäikum abwärts sind dieser Grundrichtung gefolgt.Die ältesten Faltungsvorgänge im Präkambrium stehen im Zusammenhang mit gewaltigen Intrusionen vorwiegend granitischer Gesteine. Nachdem der Kontinent durch diese Vorgänge bereits am Ende des Archäikums in NO-SW-Richtung konsolidiert war, erfolgten in postarchäischer Zeit Krustenbewegungen, die sich ebenfalls dieser Richtung anpassen. Auffällig ist die randliche Aufwulstung des Kontinents in diesem Abschnitt und deren NO-SW gerichtete Querverbiegung, die stellenweise von großen Brüchen begleitet wird. Diese Bruchtektonik scheint jedoch wenigstens im mittleren Südwestafrika nicht das vonStahl angenommene Ausmaß erreicht zu haben. Die vonKrenkel angenommene große Überschiebungslinie am Südrande des Khomas-Hochlandes konnte als nicht vorhanden nachgewiesen werden.Das durch die Vergitterung der randlichen Aufwulstung und der NO-SW gerichteten Querverbiegung am höchsten herausgehobene Gebiet ist das Khomas-Hochland, dessen Anlage als Resistenzscholle bis ins älteste Archäikum zurückzuverfolgen ist.     

A CRYSTALLOGRAPHIC STUDY OF TOPAZ,BERYL AND SMOKY QUARTZ FROM FANCHIH DISTRICT,N.SHANSI

After our paper~2 on the Topaz from Mongolia,Shensi and KiangsuI took profit of a travelling in Shansi,in the early summer 1932,to visit thelocalities myself.The chief mineral producing locality is Houkoupei(后备     

A PLIOCENE FLORA FROM SHANSI PROVINCE

A small collection of fossil plants was made in 1930 by Dr.GeorgeB. Barbour,of Yenching University,in the course of his study of the sedimen-tary deposits near Taiku,Shansi Province (See text figure 1).My acknow-ledgement is due to Dr. Barbour,and to Dr.     

THE OCCURRENCE OF CERCIS ASSOCIATED WITH THE REMAINS OF SINANTHROPUS

In a short paper entitled "Evidences of the Use of Fire by Sinanthropus",Dr.Davidson Black has discussed the occurrence of burned bone fragments andcharcoal debris in association with the remains of Sinanthropus at Chou KouTien,and has concluded that Sina