Ion microprobe analysis of oxygen isotope ratios in quartz from Skye granite: healed micro-cracks,fluid flow,and hydrothermal exchange

 Quartz grains in hydrothermally altered granites from the Isle of Skye are highly heterogeneous and not equilibrated in oxygen isotope ratio at the 20 μm scale. Ion microprobe analysis of one grain shows a gradient of 13‰ over 400 μm and a greater range in δ ¹⁸O than all quartz previously analyzed on the Isle of Skye. Other crystals from the same outcrop are homogeneous. Digitized cathodoluminescence images reveal patterns of magmatic zoning and brittle fracturing not otherwise detectable. The ion probe analysis correlates low δ ¹⁸O values on a micro-scale to one set of healed cracks. Thus, quartz exchanges oxygen isotopes primarily by solution and reprecipitation along fractures, in contrast to more reactive feldspar that appears to exchange from the grain boundary inward. Macroscopic models of isotope exchange are not realistic for these rocks; the flow of hydrothermal fluids was heterogeneous, anisotropic and crack controlled. Received: 23 October 1995/Accepted: 9 April 1996     

Primary minerals of Zn-Pb mining and metallurgical dumps and their environmental behavior at Plombières,Belgium

The primary phases and minerals of the Plombières dumps include typical smelting furnace products such as metallic Fe, Pb, Cu, Zn, Fe-Zn alloys, carbides, phosphides, sulfides of Fe, Zn, Pb, Cu, Mn (alabandite), and FeAs. Spinels, mainly of Fe and Al, are common constituents of the primary assemblage; substitution by Zn, V, Cr, Ti, Mg, and Ca occurs. Primary phases also include the most common Zn-rich fayalite, Zn-rich Ca-Fe silicates, melilite, corundum, and apatite. Most of the Zn is incorporated in iron silicates, ZnO and ZnS. Lead occurs mainly as PbS, metallic lead, and is also present in coal residues. Cadmium is found mainly in metallic zinc and its alloys and in ZnO. The dumps also contain mining wastes composed of pyrite, melnikovite, and iron oxides produced by natural weathering of Zn-Pb ores. Melnikovite and iron oxides are rich in As, Pb, and Zn and possess an increased content of Tl. Leaching tests carried out on the surfaces of polished sections indicate that acid rain (solutions I and II) will mobilize mainly Zn and Cd and, to a much smaller extent, Pb and Sb. Leaching of metals by sulfate-chloride fluids present in the pore network of dumps (solutions III, IV, and V) depends on the pH, which in the dumps is controlled by the proportion of carbonates to sulfides. The more acid fluids leach both sulfides and silicates.     

Composition of hydrous melts in equilibrium with quartz eclogites

Summary Compositions of the hydrous melts in equilibrium with garnet, omphacitic clinopyroxene and quartz have been investigated experimentally at 28.5 and 35 kbar. They are represented by silica-rich liquids (> 70% SiO₂) with low MgO, FeO and CaO contents. The removal of ca 10–15% of the magma of this composition may be sufficient to convert quartz eclogite formed after subduction of altered MORB into a quartz-free bimineralic eclogite assemblage, which is a common type of xenoliths in kimberlites.At 28.5 kbar the solidus temperature is between 700 and 750° C in the system quartz eclogite—water, and the high pressure amphibole-out boundary lies at ca 25 kbar in accord with the previous studies.

---

Die Zusammensetzung wasserhältiger Schmelzen im Gleichgewicht mit Quarz-Eklogiten

Zusammenfassung Um Prozesse zu simulieren, die bei der Subduktion von Ozeanbodenbasalten durch partielle Anatexis im Stabilitätsfeld von Eklogiten ablaufen, wurde die Zusammensetzung wasserhältiger Schmelzen in Gleichgewicht mit Granat, Omphacit und Quarz bei 28.5 und 35 Kbar experimentell untersucht. Diese Schmelzen sind reich an SiO₂ (> 70 Gew%) und arm an Mg0, Fe0 and CaO. Die Extraktion von ca. 10–15% derartiger Schmelzen würde genügen, um quarzführende Eklogite, die durch die Subduktion von alteriertem MORB Material entstanden sind, in quarzfreie bimineralische Eklogite umzuwandeln wie sie häufig als Xenolithe in Kimberliten beobachtet werden.Im System Quarz-Eklogit-Wasser liegt die Solidustemperatur bei 28.5 Kbar zwischen 700 und 750°C. Die obere Stabilitätsgrenze von Amphibol liegt in diesem Temperaturbereich bei ca. 25 Kbar.

---

---

With 1 Figures     

A new, instantaneous aeolian sand trap design for field use

A new aeolian sediment trap is described which can give up to 1 Hz measurement frequency in field conditions. The trap adopts a circular, horizontal trap design with a load cell connection to give continuous, unobtrusive trap measurement of sediment flux. Simultaneous velocity recording is carried out using an anemometer. Trap construction costs are approximately £200. Initial results in field conditions using a direct comparison of wind velocity data, sampled at an equivalent frequency, have given a first-order relationship between sediment flux and velocity. The trap enables simultaneous sampling of wind velocity and sediment flux at a sufficiently short interval to enable investigation of sediment transport dynamics under a variety of field conditions.     

Ice wastage and landscape evolution along the southern margin of the Laurentide Ice Sheet, north-central Wisconsin

The Chippewa and Wisconsin Valley Lobes of the Laurentide Ice Sheet reached their maximum extent in north-central Wisconsin about 20 000 years ago. Their terminal positions are marked by a broad area of hummocky topography, containing many ice-walled-lake plains, which is bounded on the up-ice and down-ice sides by ice-contact ridges and outwash fans. The distribution of these ice-disintegration landforms shows that a wide zone of stagnant, debris-covered, debris-rich ice separated from the active margins of both lobes as they wasted northward during deglaciation. Accumulation of thick, uncollapsed sediment in ice-walled lakes high in the ice-cored landscape indicates a period of stability. In contrast, hummocky disintegration topography indicates unstable conditions. Thus, we interpret two phases of late-glacial landscape evolution. During the first phase, ice buried beneath thick supraglacial sediment was stable. Supraglacial lakes formed on the ice surface and some melted their way to solid ground and formed ice-walled lakes. During the second phase, buried ice began to melt rapidly, hummocky topography formed by topographic inversion, and supraglacial and ice-walled lakes drained. We suggest that ice wastage was controlled primarily by climatic conditions and supraglacial-debris thickness. Late-glacial permafrost in northern Wisconsin likely delayed wastage of buried ice until after about 13 000 years ago, when climate warmed and permafrost thawed.     

Characterisation of brown coal humic acids and modified humic acids using pyrolysis gcms and other techniques

It has been proposed that Victorian brown coal can be considered as a two-component structure — a lignocellulosic “host”, containing various amounts of weakly bound or entrapped “guest” material together with very small amounts of inorganic and/or mineral matter. The latter predominantly consists of wax esters and/or terpenoid material. In this paper we describe attempts to gain structural information regarding the more complex, “host” component of the coal. Our initial model compound has been humic acid that can be readily obtained from the coal by alkaline extraction. It has been found that “pure” humic acid, free from material associated with the “guest” components of the coal, can be obtained by a highly selective, low-yielding alkaline extraction. This humic acid has been studied by nmr spectroscopy and pyrolysis gas chromatography-mass spectroscopy (py-gc/ms). The products arising from py-gc/ms have been compared with those obtained from similar pyrolysis of whole coals. Alkylation of humic acids using alkyl halides in the presence of base has been successfully carried out and reactivity of the resulting materials compared with those of the parent coal and humic acid.     

Leucoxene fish as a micro-kinematic indicator

Asymmetric aggregates of fine-grained leucoxene and quartz are reported from siliceous L-S tectonites deformed by progressive simple shear. The leucoxene fish, morphologically similar to mica fish, consistently yield shear senses in agreement with other kinematic criteria. We interpret the leucoxene as a pre- or early syntectonic alteration product of detrital heavy-minerals in a siliciclastic protolith. The leucoxene fish behave as passive markers, and they record kinematics by modification of pre-existing aggregates rather than syndeformational mineral growth. For siliceous metasedimentary rocks otherwise lacking in micro-kinematic indicators, leucoxene fish may provide an alternative to quartz c-axis analysis.     

Neogene volcanism and Holocene earthquakes in the Tanlu fault zone, eastern China

In this paper, we study the relationship between Neogene volcanism and Holocene earthquakes in the Tanlu fault, eastern China. We find that fault segments through which Neogene and Quaternary magma have extruded do not show Holocene slip because they are covered by unfaulted basalts. In contrast, fault branches that are away from the Quaternary volcanic centers display Quaternary faulting and are responsible for earthquakes as recorded both historically and geomorphologically. Therefore, magma intrusion appears to modify fault activity in two different ways: (1) within the faults, the cooling magma serves as a cohesion or barrier, welding the faults so that they become stronger in resisting slip; (2) beneath the faults, the upwelling magma promotes slip of faults above the magma body, and hence generation of earthquakes. Physically, the first case results from contraction of the cooling magma, which causes a relative increase in fault-normal stress so that the fault failure resistance is enhanced. The second case results from the upward dynamic force and the heat brought in by the magma body, both of which cause the effective fault-normal stress to decrease so that the fault failure resistance is reduced. That could explain why earthquakes occur on faults bypassing the volcanic centers as typified in the Yishu fault zone and in the regions where heat flows are relatively high as shown in the Bohai Bay area.