Photocatalytic Activity of Combustion Synthesized Nanocrystalline CeAlO3

The photocatalytic activity of combustion synthesized nanocrystalline CeAlO₃ was determined for the degradation of four anionic and four cationic dyes. The perovskite oxide showed high‐photocatalytic activity and a complete degradation of all the dyes was possible within 2 h. The photocatalytic activity of the compound was comparable with the activity of the commercial Degussa P‐25 TiO₂ catalyst. The degradation of dyes was found to follow first order kinetics and the first order degradation rate constants were determined.     

The analysis of drainage network composition

The Horton method of analyzing drainage network composition is reviewed, with the conclusion that it has not been very effective either in improving understanding or in developing useful methods of characterizing drainage basins. New methods which are based on the link rather than the Horton (or Strahler) stream are described. A number of detailed examples of the application of these new methods to the topologic and geometric properties of networks are provided. The results are compared with the predictions of the random model. Data used in the analysis were obtained from 1:24,000 U.S.G.S. topographic maps of eastern Kentucky. Thirty drainage basins were selected and their channel networks were outlined first by the contour-crenulation (CC) method and then by another, more objective, method (SC) in which stream sources were identified by a quantitative slope criterion. The CC and SC samples comprise about 8,700 and 1,700 links, respectively. The three most important results of the analysis are: (1) the channel networks are slightly but significantly more elongated than predicted by the random model, (2) there are fewer second magnitude links than predicted, and (3) the length distribution for interior links depends upon the kind of link (interior or exterior) joined downstream. These features are found in both CC and SC networks.     

State-of-the-art of geotechnical earthquake engineering practice

Major developments in geotechnical earthquake engineering practice over the last 15 years are reviewed. The objectives of the review are to present a coherent view of the current state of practice at the highest level and to examine trends, which may shape practice in the future. Developments are described in the following areas: specification of design ground motions, dynamic response analysis, evaluation of liquefaction potential, evaluation of residual strength of liquefied soil, post-liquefaction displacement analysis, and seismic risk analysis.     

Variation of mineral composition,fabric and oxygen fugacity from massive to foliated eclogites during exhumation of subducted ocean crust in the North Qilian suture zone,NW China

Eclogites from the North Qilian suture zone are high‐pressure low‐temperature metamorphic rocks of ocean crust protolith, and occur in both massive and foliated varieties as individual blocks of tens to hundreds of metres in size. The massive type is weakly deformed and shows granoblastic texture characterized by a coarse‐grained peak mineral assemblage of Grt¹ + Omp¹ + Ph + Rt ± Lws (or retrograde Cz). In contrast, the foliated type is strongly deformed and shows a fine‐grained retrograde mineral assemblage of Grt² + Omp² + Cz + Gln + Ph. Both total FeO and aegirine contents in omphacite, as well as X_Fe[=Fe³⁺/(Fe³⁺ + Al^VI)] in clinozoisite/epidote, increase significantly from massive to foliated eclogites. Lattice preferred orientation (LPO) of omphacite, determined by electron back‐scatter diffraction analysis, is characterized by weak and strong SL‐type fabrics for massive and foliated eclogites, respectively. Clinozoisite/epidote also developed SL‐type fabric, but different from the LPOs of omphacite in <010> and <001> axes, owing to their opposite crystallographic long and short axis definitions. The transition of deformation mechanism from dislocation creep to diffusive mass transfer (DMT) creep in omphacite and the concomitant retrograde metamorphism both are efficiently facilitated when the original coarse‐grained Omp¹ + Grt¹ + Lws assemblage is dynamically recrystallized and retrogressed into the fine‐grained Fe³⁺‐rich assemblage of Omp² + Grt² + Cz + Gln. The DMT process with concomitant anisotropic growth assisted by fluids is considered to be an important deformation mechanism for most minerals in the foliated eclogite. P–T estimates yielded 2.3–2.6 GPa and 485?510 °C for the massive eclogite and 1.8–2.2 GPa and 450?480 °C for the foliated eclogite. The significant increase in total Fe and Fe³⁺ contents in omphacite and clinozoisite/epidote from massive to foliated eclogite suggests changes in mineral compositions accompanied by an increase in oxygen fugacity during ductile deformation associated with exhumation. The LPO transition of omphacite, clinozoisite and rutile from weak SL‐type in massive eclogites to strong SL‐type in foliated eclogites is interpreted to represent the increment of shear strain during exhumation along the ‘subduction channel’.     

High-resolution profiles of iron, manganese, cobalt, cadmium, copper and zinc in the pore water of estuarine sediment

The remobilization of iron, manganese, cobalt, cadmium, copper and zinc in the pore water of estuarine sediment cores at Yingkou was assessed using diffusive equilibrium in thin films and diffusive gradients in thin films techniques. A relatively anoxic system (+33.7 to ?224.1 mV) in the sediment cores might cause the reductive release of iron, manganese and cobalt into pore water from the estuarine sediment. High-average concentrations of iron (47.85 μg ml^?1) and manganese (3.81 μg ml^?1) were observed using diffusive equilibrium in thin films on the sediment core, but the concentration of cobalt (18.02 ng ml^?1) was relatively low. A strong correlation between iron and cobalt was observed based on the vertical profiles of the metals. Manganese and iron were more readily released from the solid phase to the solution. The peak cobalt, copper and zinc concentrations were observed in the upper layer (2–4 cm) measured using diffusive gradients in thin films. However, the peak iron, manganese and cobalt concentrations were located in the deeper layer (≥7 cm). In addition, the concentration profiles measured using diffusive gradients in thin films of cobalt, copper and zinc were independent of the iron, manganese and cobalt distribution with respect to depth.     

Holocene reef growth in Torres Strait

The platform and fringing reefs of Torres Strait are morphologically similar to reefs of the northern Great Barrier Reef to the south, except that several are elongated in the direction of the strong tidal currents between the Coral Sea and the Gulf of Carpentaria. Surface and subsurface investigations and radiocarbon dating on Yam, Warraber and Hammond Islands reveal that the initiation and mode of Holocene reef growth reflect antecedent topography and sea-level history. On the granitic Yam Island, fringing reefs have established in some places over a Pleistocene limestone at about 6 m depth around 7000 years BP. Emergent Holocene microatolls of Porites sp. indicate that the reefs have prograded seawards while sea level has fallen gradually from at least 0.8 m above present about 5800 years BP. On the Warraber Island reef platform drilling near the centre indicated a Pleistocene limestone foundation at a depth of about 6 m over which reefs established around 6700 years BP. Reef growth lagged behind that on Yam Island. Microatolls on the mature reef flat indicate that the reef reached sea level around 5300 years BP when the sea was around 0.8–1.0 m above present. On the reef flat on the western side of Hammond Island bedrock was encountered at 7–8 m depth, overlain by terrigenous mud. A progradational reef sequence of only 1–2 m thickness has built seaward over these muds, as sea level has fallen over the past 5800 years. Reef-flat progradation on these reefs is interpreted to have occurred by a series of stepwise buildouts marked by lines of microatolls parallel to the reef crest, marking individual coalescing coral heads. Detrital infill has occurred between these. This pattern of reef progradation is consistent with the radiocarbon dating results from these reefs, and with seismic investigations on the Torres Reefs.     

Evaluation of MM5 mesoscale model at local scale for air quality applications over the Swedish west coast: Influence of PBL and LSM parameterizations

Summary The performance of MM5 mesoscale model (Version 3.6.3) using different planetary boundary layer (PBL) and land surface model (LSM) parameterizations is evaluated and compared using high temporal and spatial resolution G?TE2001 campaign data at local scale (a few kilometers) over the Greater G?teborg area along the Swedish west coast during 7–20 May 2001. The focus is on impact of PBL and LSM parameterizations on simulated meteorological variables important for air quality applications such as global radiation, diurnal cycle of near-surface air temperature and wind, diurnal cycle intensity, near-surface vertical temperature gradient, nocturnal temperature inversion, boundary layer height, and low-level jet (LLJ). The model performance for daytime and nighttime and under different weather conditions is also discussed. The purpose is to examine the performance of the model using different PBL and LSM parameterizations at local scale in this area for its potential applications in air quality modeling. The results indicate that the influence of PBL and LSM parameterizations on simulated global radiation, diurnal cycle of near-surface air temperature and wind speed, diurnal cycle intensity, vertical temperature gradient, nocturnal temperature inversion and PBL heights, which are critical parameters for air quality applications, is evident. Moreover, the intensity and location of LLJ are simulated well by all schemes, but there also exist some differences between simulated results by using different PBL and LSM schemes. Therefore, the choice of PBL and LSM parameterizations is important for MM5 applications to air quality studies. Correspondence: Junfeng Miao, Department of Earth Sciences, G?teborg University, P.O. Box 460, 405 30 G?teborg, Sweden     

Landscape response to tipping points in granite weathering: The case of stepped topography in the Southern Sierra Critical Zone Observatory

The dynamics of granitic landscapes are modulated by bimodal weathering, which produces patchy granular soils and expanses of bare rock ranging from meter-scale boulders to mountain-scale domes. We used terrain analysis and with cosmogenic nuclide measurements of erosion rates to quantitatively explore Wahrhaftig’s decades-old hypothesis for the development of “stepped topography” by differential weathering of bare and soil-mantled granite. According to Wahrhaftig’s hypothesis, bare granite weathers slower than soil-mantled granite; thus random erosional exposure of bare rock leads to an alternating sequence of steep, slowly weathering bedrock “steps” and gently sloped, but rapidly weathering, soil-mantled “treads.” Our investigation focused on the terrain surrounding the Southern Sierra Critical Zone Observatory (CZO), which is underlain by granitic bedrock and lies outside the limits of recent glaciation, in the heart of the stepped topography described by Wahrhaftig. Our digital terrain analysis confirms that steep steps often grade into gentle treads, consistent with Wahrhaftig’s hypothesis. However, we observe a mix-and-match of soil and bare rock on treads and steps, contrary to one of the hypothesis’ major underpinnings – that bare rock should be much more common on steps than on treads. Moreover, the data show that bare rock is not as common as expected at step tops; Wahrhaftig’s hypothesis dictates that step tops should act as slowly eroding base levels for the treads above them. The data indicate that, within each landscape class (i.e., the steps and treads), bare rock erodes more slowly than surrounding soil. This suggests that the coupling between soil production and denudation in granitic landscapes harbors a tipping point wherein erosion rates decrease when soils are stripped to bedrock. Although broadly consistent with the differential weathering invoked by Wahrhaftig, the data also show that steps are eroding faster than treads, undermining Wahrhaftig’s explanation for the origins of the steps. The revised interpretation proposed here is that the landscape evolves by back-wearing of steps in addition to differential erosion due to differences in weathering of bare and soil-mantled granite.     

230Th-238U radioactive disequilibria in tholeiites from the FAMOUS zone (Mid-Atlantic Ridge, 36°50′N): Th and Sr isotopic geochemistry

We analyzed, U, Th and²³⁰Th/²³²Th activity ratios for a few tholeiites from the Mid-Atlantic Ridge FAMOUS zone at 36°50′N. The results show a fairly wide scatter for both Th/U and (²³⁰Th/²³²Th) ratios. Seawater contamination appears to be responsible for this scatter and, for the uranium, produces an increase in content yielding a (²³⁴U/²³⁸U) ratio greater than 1 and, for the Th, an increase of the (²³⁰Th/²³²Th) ratio which is a very sensitive indicator for contamination. Also, the latter often is selective: U, Th and Sr are not affected in the same manner.When discarding all data for contaminated samples, the FAMOUS zone appears to be very homogeneous with aTh/U ratio value of 3.05 and a (²³⁰Th/²³²Th) ratio value of 1.24. Comparison with other active volcanic areas reveals a negative correlation between (²³⁰Th/²³²Th) and⁸⁷Sr/⁸⁶Sr ratios for present lavas which is indicative of a consistency in Th-U and Rb-Sr fractionation in the source regions of these magmas. The Th isotopic geochemistry can thus provide useful information for the study of present volcanism, information as valuable as that from Sr, Pb or Nd isotopes.