Flare-related changes in the profiles of six photospheric spectral lines

The profiles of six photospheric absorption spectral lines (Fei 5250 Å, Fei 5324 Å, Fei 5576 Å, Cai 5590 Å, Cai 6103 Å and Fei 6165 Å), measured in the kernel of a 2N solar flare and in a quiet-Sun area, were compared. The observations were carried out with an echelle spectrograph of the Crimean Astrophysical Observatory. It was shown that, compared to the quiet-Sun profiles, the flare profiles are shallower in the line core and are less steep in the wings. Therefore, measurements of the longitudinal magnetic field made with a magnetograph system which uses the Cai 6103 Å  spectral line, can be underestimated by 18–25% in areas of bright H ribbons of a moderate solar flare. Modeling of the solar photosphere performed by using a synthesis method showed that, in a solar flare, the enhanced core emission seems to be related to heating of the photosphere by the flare, whereas the decrease of the slope of the wings was presumably caused by the inhomogeneity of the photospheric magnetic field.     

A case study of sewage discharge in the shallow coastal area of the Northern Adriatic Sea (Gulf of Trieste)

A case study was carried out in 2000 in the shallow coastal area of the Northern Adriatic Sea (Gulf of Trieste) where untreated domestic sewage and industrial wastes are discharged at rate of 5500 m³·day^?1. The sewage plume above the outfall was followed using faecal coliforms (FC) and overturning length scale (l_T). The latter was rejected as a marker as the discharge conditions prohibit following the turbulence of sewage water. Intermittent sewage discharge is reflected in the minimal effect of eutrophication. Increase of phytoplankton biomass is thus only minor compared with the unpolluted area regardless of elevated concentrations of sewage‐derived nutrients (confirmed by correlation coefficients between FC and NH₄⁺, TP, PO₄^3?: 0.78, 0.71 and 0.67, respectively). Deteriorated trophic status, determined by the TRIX index, was observed only in the surface layer (average TRIX: 5.67). High FC content well above the regulation limit (up to 2.6 × 10⁵ FC·100 ml^?1) represents, therefore, the major negative impact of the improperly treated waste for the risk to human health.     

A simple model accounting for the uptake,transport, and deposition of wind‐eroded mineral particles in the hyperarid coastal Atacama Desert of northern Chile

As previously observed in marine sediments collected downwind of African or South American continental sources, recent studies of sediment cores collected at the bottom of Mejillones Bay in north Chile (23°S) show a laminated structure in which the amount of particles of aeolian origin and their size create significant differences between the layers. This suggests inter‐annual to inter‐decadal variations in the strength of the local southerly winds responsible for (1) the erosion of the adjacent hyperarid surface of the Mejillones Pampa, and (2) the subsequent transport of the eroded particles towards the bay. A simple model accounting for the vertical uptake, transport, and deposition of the particles initially set into motion by wind at the surface of the pampa is proposed. This model, which could be adapted to other locations, assumes that the initial rate of (vertical) uptake is proportional to the (horizontal) saltation flux quantified by means of White's equation, that particles are lifted to a height (H), increasing with the magnitude of turbulence, and that sedimentation progressively removes the coarsest particles from the air column as it moves towards the bay. In this model, the proportionality constant (A) linking the vertical flux of particles with the horizontal flux, and the injection height (H) control the magnitude and size distribution of the deposition flux in the bay. Their values are determined using the wind speed measured over the pampa and the size distribution of particles collected in sediment traps deployed in the bay as constraints. After calibration, the model is used to assess the sensitivity of the deposition flux to the wind intensity variations. The possibility of performing such quantitative studies is necessary for interpreting precisely the variability of the aeolian material in the sediment cores collected at the bottom of Mejillones Bay. Copyright © 2010 John Wiley & Sons, Ltd.     

The special climate change fund: origins and prioritisation assessment

Abstract

A central issue in tackling climate change is to understand to what extent different short-term mitigation strategies are consistent with long-term stabilization targets. The present article aims at cross-comparing emission paths derived by plausible short-term policies against those implied by long-term climate targets, comparing, for example, differences in peak periods. Short-term policies considered are, for instance, Kyoto-type targets with or without participation by the USA and/or by developing countries. Long-term targets focus instead on stabilization of CO₂ concentrations, radiative forcing and the increase in atmospheric temperature relative to pre-industrial levels. In order to account for the uncertainty surrounding the climate cycle, for each long-term goal multiple paths of emission—the most probable, the optimistic and the pessimistic projections—are considered in the comparison exercise. Comparative analysis is performed using the FEEM-RICE model, a regional economy—climate model. The results suggest that some early policy action should take place for short-term emissions to be compatible with long-term targets. In particular, the Kyoto-type regimes appear to be on a compatible emission path, at least up to the second commitment period. However, this is no longer the case when assuming a pessimistic realization of the uncertain climate parameters.     

The meteoritic origin of Tutankhamun's iron dagger blade

Scholars have long discussed the introduction and spread of iron metallurgy in different civilizations. The sporadic use of iron has been reported in the Eastern Mediterranean area from the late Neolithic period to the Bronze Age. Despite the rare existence of smelted iron, it is generally assumed that early iron objects were produced from meteoritic iron. Nevertheless, the methods of working the metal, its use, and diffusion are contentious issues compromised by lack of detailed analysis. Since its discovery in 1925, the meteoritic origin of the iron dagger blade from the sarcophagus of the ancient Egyptian King Tutankhamun (14th C. BCE) has been the subject of debate and previous analyses yielded controversial results. We show that the composition of the blade (Fe plus 10.8 wt% Ni and 0.58 wt% Co), accurately determined through portable x‐ray fluorescence spectrometry, strongly supports its meteoritic origin. In agreement with recent results of metallographic analysis of ancient iron artifacts from Gerzeh, our study confirms that ancient Egyptians attributed great value to meteoritic iron for the production of precious objects. Moreover, the high manufacturing quality of Tutankhamun's dagger blade, in comparison with other simple‐shaped meteoritic iron artifacts, suggests a significant mastery of ironworking in Tutankhamun's time.     

Metallothionein-like proteins induced by cadmium stress in the scallop Mizuhopecten yessoensis

Organisms have evolved a cellular response called stress protein response that increases their tolerance in adverse environmental conditions. Well known stress proteins that bind essential and toxic metals are metallothionein (MT). The scallop Mizuhopecten yessoensis is the most interesting organism because it is able to accumulate toxic cadmium in its digestive gland. However, in the tissue of the digestive gland of Mizuhopecten yessoensis MT (metallothioneins) have not been found. Eastern scallops, Mizuhopecten yessoensis, were collected from two locations ?? one clean and one polluted site. The concentrations of cadmium (Cd), copper (Cu) and zinc (Zn) were measured in the digestive gland. There was a significant increase in Cd concentrations in this studied tissue. We found that in the presence of cadmium Mizuhopecten yessoensis can induce high molecular proteins. The results of experiments have shown that Cd-binding ligands have a number of properties similar to MT: acetone and temperature stability; the ability to bind some metals, including Cd, Cu and Zn. Protein chromatography (FPLC, Superosa 12) from the digestive gland of scallop M. yessoensis has shown that cadmium is associated with high molecular weight Cd-binding proteins (72 kDa and 43 kDa). The major cadmium-binding protein 72 kDa is glycoprotein. In experiments we have demonstrated that Cd-binding proteins can be induced when there is cadmium exposure. The results of this study strongly suggest that the far eastern scallop Mizuhopecten yessoensis has a unique and well-developed system for the detoxification of heavy metals and it allows for biochemical systems to be maintained in a relatively stable manner in the presence of heavy metals.     

Environmental impacts of household appliances in Europe and scenarios for their impact reduction

Assessing the environmental impact due to consumption of goods and services is a pivotal step towards achieving the sustainable development goal related to responsible production and consumption (i.e. SDG 12). Household appliances plays a crucial role and should be assessed in a systemic manner, namely considering all life cycle stages, technological efficiency, and affluence aspects. The present study assess the impact of such household appliances used in Europe, and tests scenarios of potential impact reduction at various scales. Life cycle assessment is applied to 14 different household appliances (ranging from dishwashers to television devices) selected to build a set of representative products, based on their economic value and diffusion in households in Europe. Related impacts are calculated with the Environmental Footprint method for calculating a Consumer Footprint “appliances” for the baseline year 2010. A number of scenarios encompassing eco-solutions on a technical level, changes in consumption pattern, behavioral changes, as well as the combination of all these aspects are run to estimate the Consumer Footprint related to household appliances for the year 2030, compared against this baseline scenario. The baseline Consumer Footprint is confirming the importance of the use phase in leading the impacts in almost all impact categories. Testing different scenarios concludes that there is a reduction of the impact for most of the categories (with up to 67% for the ozone depletion potential, and still around 35% for the global warming potential), while two of the here examined impact categories (i.e. land-use and mineral resource depletion) show an overall potential that is even negative – i.e. the results of all scenarios are higher than the ones of the 2010 baseline scenario. The increase in purchase and use of such appliances may offset energy efficiency benefits in some of the examined categories. Hence, the assessment of sustainability of appliances consumption should always include several scales, from the efficiency of the products (micro scale), to the improvement of the energy mix (meso scale), up to accounting for socio-economic drivers and patterns of consumption affecting the overall appliances stock (macro scale).