Characterisation of Two New Reference Materials: STL-1, the Stewart Lepidolite and ZA-1, the Zapot Amazonite

The analysis of granitic pegmatites still remains a challenge because suitable natural reference materials are scarce or not available. Two new reference materials were prepared at the Smithsonian Institution, to provide an avenue to pursue the geochemical analysis of micas and feldspars in granitic pegmatites: STL-1, the Stewart lepidolite (NMNH 174041) and ZA-1, the Zapot amazonite (NMNH 174042). STL-1 was prepared from lepidolite collected from the lithium-rich Stewart pegmatite, San Diego County, California (33°22'52'N, 117°03'41'W). ZA-1 was prepared from an amazonite from the topaz-bearing Zapot pegmatite, Mineral County, Nevada, (38° 41'N, 118 °33'W). The results of this study indicated that STL-1 and ZA-1 are homogeneous and could be used as reference materials that would allow the expansion of calibration curves in XRF analysis up to 16000 μg g⁻¹ for Rb, 2000 μg g⁻¹ for Cs and 100 μg g⁻¹ for Tl. STL-1 and ZA-1 also contain unusually high concentrations of Ga and Tl, and STL-1 of Nb.     

Ophiolites of the Eastern Peninsulas zone (Eastern Kamchatka): Age, composition, and geodynamic diversity

Abstract   The geological, geochemical and mineralogical data of dismembered ophiolites of various ages and genesis occurring in accretionary piles of the Eastern Peninsulas of Kamchatka enables us to discriminate three ophiolite complexes: (i) Aptian–Cenomanian complex: a fragment of ancient oceanic crust, composed of tholeiite basalts, pelagic sediments, and gabbroic rocks, presently occurring in a single tectonic slices (Afrika complex) and in olistoplaques in Pikezh complex of the Kamchatsky Mys Peninsula and probably in the mélange of the Kronotsky Peninsula; (ii) Upper Cretaceous complex, composed of highly depleted peridotite, gabbro and plagiogranite, associated with island arc tholeiite, boninite, and high-alumina tholeiitic basalt of supra-subduction origin; and (iii) Paleocene–Early Eocene complex of intra-island arc or back-arc origin, composed of gabbros, dolerites (sheeted dykes) and basalts produced from oceanic tholeiite melts, and back-arc basin-like dolerites. Formation of the various ophiolite complexes is related to the Kronotskaya intra-oceanic volcanic arc evolution. The first ophiolite complex is a fragment of ancient Aptian–Cenomanian oceanic crust on which the Kronotskaya arc originated. Ophiolites of the supra-subduction zone affinity were formed as a result of repeated partial melting of peridotites in the mantle wedge up to the subduction zone. This is accompanied by production of tholeiite basalts and boninites in the Kamchatsky Mys segment and plagioclase-bearing tholeiites in the Kronotsky segment of the Kronotskaya paleoarc. The ophiolite complex with intra-arc and mid-oceanic ridge basalt geochemical characteristics was formed in an extension regime during the last stage of Kronotskaya volcanic arc evolution.     

Mercury in sediments of Ulhas estuary

Hg levels in water, suspended particulate matter and sediment of the Ulhas estuary are under considerable environmental stress due to the indiscriminate release of effluents from a variety of industries including chlor-alkali plants. Concentration ranges of dissolved (0.04-0.61 micro gl(-1)) and particulate (1.13-6.43 micro gg(-1)) Hg reveal a definite enhancement of levels in the estuary. The Hg burden in sediment upstream of the weir that limits the tidal influence is low (0.08-0.19 micro gg(-1)) with low C(org) content (1.8-2.9%). The high Hg content of the sediment just below the weir varies seasonally (highest concentration recorded being 38.45 micro gg(-1)) due to incremental accretion of sediment as the fresh water flow over the weir progressively decreases. The 30 km segment of the estuary sustains markedly high levels of Hg in the sediment with an exponential decrease in the seaward direction from the weir. Higher concentrations than the expected background prevail in all the estuarine cores up to the bottom, though the overall concentration decreases from about 20 micro gg(-1) in core 7 (inner estuary) to 1 micro gg(-1) in core 31 (outer estuary). The Hg in sediment is associated with C(org), while its correlation with Al, Fe and Mn is poor. The Hg profiles in cores from the Arabian Sea (stations 34, 35 and 37) have a distinct horizon of enhanced concentration in the 5-60 cm segment. Based on 210Pb dating of core 37, the sediment at the bottom of this core is inferred to have been deposited in the year 1949, roughly two year prior to the establishment of the first chlor-alkali plant and represents the background (0.06-0.10 micro gg(-1)). The Hg profiles in the offshore cores indicate a marked increase in transfer of Hg to sediment subsequent to 1980, with a peak around 1990-1992. Based on the index of geoaccumulation it is considered that the estuarine segment between stations 4 and 23 is extremely polluted, while the sediment from the open coast is moderately polluted in the top 25-30 cm with respect to Hg. The enrichment factor of Hg in the sediment is 350-700 for core 4 and decreases to 0-7 for the open-shore cores.     

Precision A.C. bridge set for measuring magnetic susceptibility of rocks and its anisotropy

Summary A bridge set for measuring the magnetic susceptibility of rocks and its anisotropy is described. The classical transformer bridge has been supplemented with an auxiliary compensating arm for balancing the bridge without any mechanical infringement of the measuring coils. By employing this principle and the appropriate methods a sensitivityof 4 × 10 ^–8 SI units (3 × 10 ^–9 e.m.u./cm³) has been achieved for a sample of 8 cm³ in volume. In addition to its high sensitivity the device has a considerable accuracy, which makes it suitable for susceptibility anisotropy measurements even of samples with a very low susceptibility and only slight anisotropy. Well-reproducible results have been achieved for samples with a mean susceptibility of the order of10 ^–5 SI units with an anisotropy degree of only about 1.05.Institute of Applied Geophysics.     

Primitive island arc and oceanic lavas from the hunter ridge-hunter fracture zone. Evidence from glass,olivine and spinel compositions

Summary At its southernmost end, the main spreading centre of the North Fiji Basin is propagating into arc crust of the poorly-known Hunter Ridge. We define nine magmatic groups from major element glass chemistry and olivine and spinel compositions in samples dredged from twenty six sites in this area by the R/V Academician A. Nesmeyanov in 1990. These include groups of boninites, island arc tholeiites (IAT), mid-ocean ridge basalts (MORB), enriched mid-ocean ridge basalts (E-MORB), olivine porphyritic andesites and basaltic andesite and Na-rhyolites. Primitive lavas containing highly forsteritic olivine phenocrysts are common in all the groups, except for the rhyolites.We report over 100 glass analyses for dredged rocks from this region, and about 300 olivine-spinel pairs for representatives of all the magmatic groups identified, except the Na-rhyolites.The MORB in this region are probably produced at the propagating spreading centre in the southern part of the North Fiji Basin. Juxtaposition of shallow, hot MORB-source diapirs supplying the MORB in this area, and the sub-arc damp, refractory upper mantle beneath the Hunter Ridge, provides suitable petrogenetic conditions to produce a range of magma types, from island arc tholeiites through to high-Ca boninites. The latter were recovered in eleven dredges.The E-MORB lavas recovered from the extreme southern margin of the North Fiji Basin are shown to be essentially identical to those dredged from adjacent older South Fiji Basin crust. It is hypothesized that the former were either scraped off the South Fiji Basin crust during an episode of oblique subduction that may have generated the Hunter Ridge during the last 5 Myr, or alternatively, that slices of the South Fiji Basin crust were trapped and incorporated into the North Fiji Basin as the subduction zones fronting the Vanuatu arc stepped or propagated southward.

---

Primitive Inselbogen- und ozeanische Laven von Hunter Rücken und der Hunter BruchZone: die Bedeutung der Zusammensetzung von Glas, Olivin und Spinell

Zusammenfassung Das spreading centre des Nord-Fidschi-Beckens setzt sich an seinem südlichsten Ende in die Inselbogen-Kruste des noch wenig bekannten Hunter-Rückens fort.Wir definieren 9 magmatische Gruppen auf der Basis der Hauptelement-Zusammensetzung von Gläsern und der Zusammensetzung von Olivin und Spinell in Proben die das Forschungsschiff R/V Akademiker A. Nesmeyanov von 26 Stellen im Jahr 1990 aufgesammelt hat. Zu diesen gehören Gruppen von Boniniten, Inselbogentholeiiten (IAT), Basalten zentralozeanischer Rücken (MORB), angereicherte zentralozeanische Rücken (E-MORB), Olivin-porphyritische Andesite und basaltische Andesite, sowie Na-Rhyolite. Primitive Laven mit Olivinkristallen, die reich an Forsterit-Komponenten sind, kommen in allen diesen Gruppen, mit Ausnahme der Rhyolite, vor.Wir legen über 100 Glas-Analysen von Gesteinen aus diesem Gebiet vor und über 300 Olivin-Spinell-Paare für Vertreter aller der hier identifizierten magmatischen Gruppen, mit Ausnahme der Natriumrhyolite.Die MORB in diesem Gebiet sind wahrscheinlich an dem aktiven Spreading Center im Südteil des Nord-Fidschi-Beckens entstanden. Das nebeneinander Vorkommen von seichten heißen MORB-Quellen Diapiren, die MORB in diesem Gebiet erzeugen, und der Sub-Inselbogen, wasserhaltige, refraktäre obere Mantel unter dem Hunter Rücken führen zu geeigneten petrogenetischen Bedingungen für die Entstehung einer Vielfalt von Magmatypen, von Inselbogentholeiiten bis zu sehr Kalziumreichen Boniniten. Die letzteren wurden in 11 Dredge-Proben gefunden.Die E-MORS Laven, die aus dem extremen Südteil des Nord-Fidschi-Beckens entnommen wurden, sind im wesentlichen mit jenen identisch, die aus der benachbarten älteren Kruste des Süd-Fidschi-Beckens stammen. Es wird vermutet, daß die letzteren entweder aus dem Süd-Fidschi-Becken während einer Episode obliger Subduktion, die in den letzten 5 Millionen Jahren zur Entstehung des Hunter Ridge geführt hat, abgeschert wurden, oder auch daß Teile der Kruste des Süd-Fidschi-Beckens in das Nord-Fidschi-Becken inkorporiert wurden als Subduktionszonen gegenüber dem Vanuato-Bogen sich nach Süden fortbewegten.

     

Hydrodynamic and geochemical conditions of the formation of stratiform Zn-Pb ore mineralization by chloride solutions

Ore mineralization is formed by postsedimentary (concentrated by evaporation to stage SW2) chloride brines metamorphosed in hydrogeochemical systems that are closed with respect to CO₂, evolve according to “calcic” trend, and have high 2mCa²⁺ > mHCO ₃ ^? + 2mCO ₃ ^2? ratios. In these situations at high R/W ratios (10–100) and temperatures (100–200°C), these brines concentrate ore elements (Zn, Pb, Fe, and Mn) that are geochemical analogues of Ca. The sulfide precipitation of these elements occurs under the effect of carbonate rocks at the abiogenic sulfate reduction of S(VI) of the original brines at low Eh values, which are created in carbonate rocks at higher (>100°C) temperatures. This origin of sulfide mineralization is intensified at decreasing R/W ratios during the dilution of the original brines by elision waters and an increase in the temperature. The hydrodynamics of these ore-forming brines is controlled by the elision hydrogeological regime, which is defined in hydrogeological structures by the geostatic pressure. The brines migrate into the zones of geochemical barriers during the relaxation of hydrogeological structures toward their equilibrium hydrostatic state. Hydrogeological structures, optimal for the precipitation of ore mineralization, are hydrodynamically active and able to maintain a steady (during 10⁵-10⁶ years) inflow of ore-forming brines into the zones of geochemical barriers and the maximum number of water-exchange cycles at these barriers. Modern analogues of these structures are miogeosyncline foredeeps with Cl-Na-Ca chloride brines with high concentrations of ore elements and overall flow rates ranging from 0.n to n m³/year. Stagnate hydrogeological platform structures in hydrostatic equilibrium cannot ensure water exchange needed for ore formation, and, hence, the brines of these structures are not able to deposit the ore elements contained in them, in spite of the high concentrations of these elements.     

Age of Detrital Zircons from Sandstones of the Mesozoic Flysch Formation in the South Anyui Suture Zone (Western Chukotka)

The South Anyui fold zone (western Chukotka) is considered a suture zone related to closure of the South Anyui oceanic basin and collision of Eurasia with the Chukotka–Arctic Alaska microcontinent in the Early Cretaceous. The existence of a compensatory sedimentation basin (foredeep) during folding in the terminal Jurassic–initial Cretaceous remains debatable. This work presents first data on age estimates of detrital zircons from Upper Mesozoic terrigenous sequences of the South Anyui suture zone obtained by the fission-track method. The distal flysch of presumably Late Jurassic age and the proximal flysch of probably Late Triassic age were sampled in the Uyamkanda River basin. The fission-track dating showed that sandstones from the flysch sections contain detrital zircons of two different-age populations. Young zircon populations from sandstones of distal turbidites in the upper course of the Uyamkanda River (two samples) are 149 ± 10.2 and 155.4 ± 9.0 Ma old (Late Jurassic), whereas those from coarse-grained proximal turbidites sampled in the lower course of the Uyamkanda River (one sample) is 131.1 ± 7.5 Ma old (Early Cretaceous). The data obtained indicate that the Late Mesozoic folding in the South Anyui suture zone was accompanied by the formation of a marginal sedimentary basin. Sediments accumulated in this basin compose tectonic nappes that constitute a fold–thrust structure with the northern vergence.     

Directionality of surface high-frequency geoacoustic emission during deformational disturbances

Changes in the directionality of surface high-frequency geoacoustic emission during periods of deformational disturbances on the diurnal time scale prior to strong seismic events on Kamchatka have been investigated. It has been shown that while the emission intensity grows by over an order of magnitude, sharp maxima appear in the direction of longitudinal acoustic oscillations. Based on their position, the orientation of the major compression axis can be determined, whose chaotic motion exhibits two metastable states around the direction to the epicenter of the earthquake.     

Swelling behaviour of expansive soil treated with fly ash–GGBS based binder

In this article, the potential of a binder developed by admixing fly ash and ground granulated blast furnace slag (GGBS) to stabilise expansive soils is evaluated. Laboratory tests included determination of free swell index, swell potential and swelling pressure tests of the soil/binder mixtures at different mixing ratio. The test results showed decrease in the swelling behaviour of the soil with increase in binder content. The percent swell–time relationship was observed to fit the hyperbolic curves enabling us to predict the ultimate percent swell from few initial test results. Addition of 1% of lime to the binder showed further improvement in reducing swelling. A good linear relationship is established between percent oedometer swell and modified free swell index (MFSI) for soil/binder mixtures without lime but the same has not been observed in the presence of lime. The compressibility characteristics of the soil/binder mixtures reduced nominally with increase in binder content but in the presence of lime, the compressibility reduced significantly. Binder used in this study has been found to be effective and economic to stabilise expansive soils with lesser amount of chemical additives such as lime.