In situ tests for ice strength measurements

Ice effects have caused extensive damage. Enormous forces have been recorded. On the other hand, ice has been used as a structural material under various situations. To use ice beneficially and to assess the danger of ice forces, it is necessary to know the mechanical properties of ice.Results from the large number of ice tests carried out in laboratories show the difficulties of sampling and testing procedures. Most of the tests have not reproduced faithfully enough the conditions existing in nature. To obtain adequate results, laborious and slow samplings and preparations of test specimens have been necessary. Recently, extensive use has been made of in situ tests in order to reduce the number of factors whixh can induce errors in measurements. Large scale tests have simulated actual structures. General ice properties have become available from small-scale in situ tests. Since these tests give rapid results, a large number are already available with a good coverage of field conditions.A theoretical basis has been devised for these in situ tests which measure essentially the unconfined and confined compressive strengths of ice, and practical devices have been developed to execute these tests. A correlation of measurements from laboratory tests and in situ tests has established a link between natural and artificial environments. Brittle elastic and clastic theories have been applied, to find the best correlations for ice tests. Test results have been related to the mechanical properties as used in engineering practice.A very summary conclusion of results is that cold sea ice and cold fresh water ice are both very strong. However, depending on the load rate, ice can be quite brittle, which mitigates dangerous effects from ice action against massive structures.     

Nitrate assimilation by zooxanthellae maintained in laboratory culture

The ability of cultured zooxanthellae to use ammonium and nitrate was tested. The zooxanthellae were initially isolated from the anemone Aiptasia pulchella. The zooxanthellae were able to grow on media supplemented with either form of dissolved inorganic nitrogen (DIN) although ammonium was inhibitory above 300 μM. In accord with the intact symbiosis and freshly isolated algae, the cultured zooxanthellae took up ammonium. In contrast, the cultured algae demonstrated nitrate uptake and utilization. This was enhanced with DIN deprivation. Nitrate reductase was found in the algae and appeared to be inducible. Within the animal host, excretory ammonium may repress this induction.     

A general method for calculating three-dimensional laminar and turbulent boundary layers on ship hulls

A general method for representing the flow properties in the three-dimensional boundary layers around ship hulls of arbitrary shape is described. It makes use of an efficient two-point finite-diffirence schem to solve the boundary-layer equations and includes an algebraic eddy-viscosity representaion of the Reynolds-stress ternsor. The numericzal method contains novel and desirable features and allows the calculation of flows in which the circumferential velocity component contains regions of flow reversal across the boundary layer. The inviscid pressure distribution is determined with the Douglas-Neumann method which, if necessary, can conveniently allow for the boundary-layer displacement surface. To allow its application to ships, and particularly to those with double-elliptic and flat-bottomed hulls, a non-orthogonal coordinate system has been developed and is shown to be economical, precise and comparatively easy to use. Present calculations relate to zero Froude number but they can be extended to include the effects of a water wave and local regions of flow separation which may stem from bulbous-bow geometries.     

Secondary flow caused by differential roughness,Langmuir circulations,and their effect on the development of sand ribbons

The process of Differential Roughness Secondary Flow (DRSF), hitherto little recognized, recently was demonstrated in a wind tunnel and in a flume. It is suggested here the DRSF may, in the natural environment, play an important part in the persistence and sharp definition of sand ribbons, previously initiated by other processes. In 1980 Karl described a series of sand ribbons, alternating with exposed substrate, which he attributed to the effect of Langmuir circulations. Although Langmuir Circulation Secondary Flow (LCSF) may indeed, in some cases, initiate sand ribbons, the sharply-defined edges typical of these features are explained better by DRSF.     

Palaeo-carbonate seep structures above an oil reservoir, Gryphon Field, Tertiary, North Sea

Petrographic and geochemical analyses performed on a North Sea core from the Gryphon Field reveal the presence of palaeo-degassing features surrounded by injected sandstones in the Eocene interval. The injected sandstones are oil-stained and poorly cemented by carbonate and quartz. ¹⁸O isotope analyses indicate that carbonate cementation occurred during shallow burial (likely less than about 300 m). Depleted ¹³C (around –30 V-PDB) carbonate cement suggests that bicarbonate was derived from the microbial oxidation of oil and gas. Late quartz overgrowths enclose oil present in the injected units. The tubular degassing conduits are composed of zoned cements and have ¹⁸O and ¹³C isotope values similar to the injected sandstones, indicating that oil and gas seepage induced the precipitation of authigenic carbonate in the shallow subsurface. Oil inclusions in inter- and intra-crystal cement sites in both injected sandstones and degassing conduits indicate that oil seepage was an ongoing feature at shallow burial. A proposed model involves oil and gas seepage and the formation of the degassing conduits, followed by a sand injection phase. It seems likely that oil and gas continued to leak towards the seabed by exploiting the network of permeable injected sandstones and the horizons of porous degassing features.     

New seismic data in the Mozambique Channel

This paper presents seismic reflection and refraction data from the Mozambique Channel, collected between 1971 and 1973. A deep sedimentary basin (up to 5 km of sediments) opens southwards to the Mozambique Basin, and is bounded to the east by the Davie Ridge and beyond by the marginal plateau of Malagasy. A continuous reflector (C), possibly of Cretaceous age, is identified between layers having seismic interval velocities of 2.4–2.8 km/s and 3.1–3.4 km/s. The deepest sediments have velocities of 4.5–4.9 km/s and overlie a layer with velocity 5.5 km/s, which may be volcanic in the north-east of the Channel.The crust occupying most of the Channel is probably pre-Cretaceous in age, and may be largely continental in nature. This is supported by subdued magnetic anomalies and the possibility of a continuous Karroo sedimentary section across the northern Channel. The oceanic crust of the Mozambique Basin may extend as far north as 24°S, into the western Channel only. The problem of the origin of the Mozambique Channel remains unresolved, although a long sedimentary history indicates that Malagasy may have separated from Mainland Africa prior to Karroo times. The Davie Ridge may possibly represent a relict strike-slip fault, which permitted movement along a north-south line.