Wavelet analysis of bathymetric sidescan sonar data for the classification of seafloor sediments in Hopvågen Bay - Norway

In this paper we examine the use of bathymetric sidescan sonar for automatic classification of seabed sediments. Bathymetric sidescan sonar, here implemented through a small receiver array, retains the advantage of sidescan in speed through illuminating large swaths, but also enables the data gathered to be located spatially. The spatial location allows the image intensity to be corrected for depth and insonification angle, thus improving the use of the sonar for identifying changes in seafloor sediment. In this paper we investigate automatic tools for seabed recognition, using wavelets to analyse the image of Hopvågen Bay in Norway. We use the back-propagation elimination algorithm to determine the most significant wavelet features for discrimination. We show that the features selected present good agreement with the grab sample results in the survey under study and can be used in a classifier to discriminate between different seabed sediments.     

The dynamics of wave induced ship motions in shallow water

The analytical method developed by Svendsen (1968) for a forced heave motion is extended to the general problem of wave induced heave, roll and sway motions of a long ship at a depth of water which is only slightly larger than the draught of the ship. This corresponds, for example, to the situation of a fully loaded ship in a harbour area.After linearization of the problem, the water motion is considered for each of the three individual motions and for the wave reflection-transmission problem for a fixed ship. The ensuing results for the forces on the ship are then synthesized to form the equations of motion, which are presented with all coefficients given, including mooring forces.Analytical and numerical results are given for the three components of motion, for the associated resonance frequencies, and for the hydrodynamic masses and moments of inertia. Finally, the assumptions used are analyzed and evaluated by comparison with measurements and with other results for a special case.     

A detailed geochemical and rock magnetic study of dredged basalt from the Sheba Ridge,Gulf of Aden

We report the results of petrological, geochemical and rock magnetic studies of basalt dredged from the eastern end of the west Sheba Ridge during cruise 11/1979 of R. R. S. Shackleton to the Western Gulf of Aden. The ridge is part of the Red Sea-Gulf of Aden spreading axis and the basalts are olivine tholeiites. The abundances of some elements are characteristic of normal MORB (mid-ocean ridge basalt) but other elemental abundances suggest affinites with transitional-type MORB.The observed magnetic properties are interpreted in terms of the composition, concentration and microstructure of the magnetic mineral fraction by recourse to the available data on synthetic analogues. The analysis has been carried out in greater detail than has been attempted in previous magneto-petrological studies. It appears that submarine weathering of the magnetic minerals (maghemitization) brings about not only the expected change in composition but also a fall in concentration of the magnetic fraction. This could result from the removal-of-iron oxidation mechanism operating in the submarine environment. It is also found that the fall in remanence with increasing degree of maghemitization is not explicable in terms of the change in composition and concentration of the magnetic minerals. A further influence—probably microstructural change—significantly reduces the remanence intensity.     

Measurement of water particle velocities in waves

Water surface profiles and horizontal and vertical water particle velocity components have been measured to investigate the properties of intermediate depth waves generated in the laboratory. The data has been compared with linear wave theory. It was found that linear theory predicted the attenuation of velocity field with depth successfully and that it overestimates both components of velocity slightly.     

Geology of the Continental Margin of Enderby and Mac. Robertson Lands, East Antarctica: Insights from a Regional Data Set

In 2001 and 2002, Australia acquired an integrated geophysical data set over the deep-water continental margin of East Antarctica from west of Enderby Land to offshore from Prydz Bay. The data include approximately 7700 km of high-quality, deep-seismic data with coincident gravity, magnetic and bathymetry data, and 37 non-reversed refraction stations using expendable sonobuoys. Integration of these data with similar quality data recorded by Japan in 1999 allows a new regional interpretation of this sector of the Antarctic margin. This part of the Antarctic continental margin formed during the breakup of the eastern margin of India and East Antarctica, which culminated with the onset of seafloor spreading in the Valanginian. The geology of the Antarctic margin and the adjacent oceanic crust can be divided into distinct east and west sectors by an interpreted crustal boundary at approximately 58° E. Across this boundary, the continent–ocean boundary (COB), defined as the inboard edge of unequivocal oceanic crust, steps outboard from west to east by about 100 km. Structure in the sector west of 58° E is largely controlled by the mixed rift-transform setting. The edge of the onshore Archaean–Proterozoic Napier Complex is downfaulted oceanwards near the shelf edge by at least 6 km and these rocks are interpreted to underlie a rift basin beneath the continental slope. The thickness of rift and pre-rift rocks cannot be accurately determined with the available data, but they appear to be relatively thin. The margin is overlain by a blanket of post-rift sedimentary rocks that are up to 6 km thick beneath the lower continental slope. The COB in this sector is interpreted from the seismic reflection data and potential field modelling to coincide with the base of a basement depression at 8.0–8.5 s two-way time, approximately 170 km oceanwards of the shelf-edge bounding fault system. Oceanic crust in this sector is highly variable in character, from rugged with a relief of more than 1 km over distances of 10–20 km, to rugose with low-amplitude relief set on a long-wavelength undulating basement. The crustal velocity profile appears unusual, with velocities of 7.6–7.95 km s⁻¹ being recorded at several stations at a depth that gives a thickness of crust of only 4 km. If these velocities are from mantle, then the thin crust may be due to the presence of fracture zones. Alternatively, the velocities may be coming from a lower crust that has been heavily altered by the intrusion of mantle rocks. The sector east of 58° E has formed in a normal rifted margin setting, with complexities in the east from the underlying structure of the N–S trending Palaeozoic Lambert Graben. The Napier Complex is downfaulted to depths of 8–10 km beneath the upper continental slope, and the margin rift basin is more than 300 km wide. As in the western sector, the rift-stage rocks are probably relatively thin. This part of the margin is blanketed by post-rift sediments that are up to about 8 km thick. The interpreted COB in the eastern sector is the most prominent boundary in deep water, and typically coincides with a prominent oceanwards step-up in the basement level of up to 1 km. As in the west, the interpretation of this boundary is supported by potential field modelling. The oceanic crust adjacent to the COB in this sector has a highly distinctive character, commonly with (1) a smooth upper surface underlain by short, seaward-dipping flows; (2) a transparent upper crustal layer; (3) a lower crust dominated by dipping high-amplitude reflections that probably reflect intruded or altered shears; (4) a strong reflection Moho, confirmed by seismic refraction modelling; and (5) prominent landward-dipping upper mantle reflections on several adjacent lines. A similar style of oceanic crust is also found in contemporaneous ocean basins that developed between Greater India and Australia–Antarctica west of Bruce Rise on the Antarctic margin, and along the Cuvier margin of northwest Australia.     

Evidence for methane and hydrogen sulfide venting imprinted on a Quaternary eolianite from southern Israel

Two different and physically separated chemosynthetic communities of bacteria are responsible for the formation of the Beeri native sulfur deposit hosted in a Late Quaternary sandstone on the southern coastal plain of Israel. The enriched concentrations are distributed over an area of about 1 km², within a zone 2–3 m thick at 1–13 m below surface. Two hundred fifty meters below the sulfur deposit, sulfur-reducing bacteria, thriving on methane generated in Neogene marls, reduced the Messinian gypsum to generate hydrogen sulfide, which subaqueously vented together with methane into the siliciclastic Quaternary sequence. Another, different chemosynthetic community ofBeggiatoa-like and unidentified bacteria oxidized the hydrogen sulfide into native sulfur and secondary gypsum, alunite, and iron sulfates. The coupled chemical and bacterial processes attributed to the formation of the sulfur deposit at Beeri are strikingly similar to the processes occurring today in the context of submarine hydrocarbon vents associated with the salt diapirs in the Gulf of Mexico.     

Nature and composition of shore-zone sediments between Jeddah and Yanbu, eastern Red Sea

The shore-zone sediments between Jeddah and Yanbu, west coast of Saudi Arabia, are composed mostly of skeletal carbonate sands. The nearshore sediments containing benthic foraminifera, algal fragments and molluscs are multimodal, the mean grain size varying between 0.76 and 2.35 ø. The beach sediments, except samples dominated by cerithid gastropods in some localities, are relatively finer than the nearshore sediments. Although the beaches to a great extent comprise sand-sized material, fine lime muds and coarse clastic gravels occur in certain areas. The dune sediments comprising mostly algal grains and ooids are very fine with 50 percent of the material in the 0.25–0.18 mm size grade. Except a general northward decrease in mean grain size, regional trends in the textural parameters of the sediments between Jeddah and Yanbu are not quite apparent. Lateral variations in the textural characteristics suggest a landward migration of the sediments in the shore zone under the influence of northerly and northwesterly winds. The carbon and oxygen (δ ¹³C + 4.80 to 4.84‰ PDB) (δ ¹³O − 0.04 to + 0.53‰ PDB) isotopic ratios of the lime muds occurring in certain shallow margins in the shore-zone, which are much higher than those of the green algae, indicate that the fine carbonates are at least in part inorganic in origin.

Like the shallow-water carbonates in tropical seas, aragonite and high Mg-calcite are the dominant carbonate minerals in the shore-zone sediments. There is a landward increase in aragonite contents caused by the landward migration of fine material from the nearshore. The dominant clay mineral in the nearshore sediments is kaolinite with subordinate swelling chlorite and little illite. Kaolinite is contributed by the coastal regions under the sub-tropical humid climate. Swelling chlorite is considered to have been formed in the nearshore by mechanical mixture of chlorite and montmorillonite derived from the metamorphic and igneous terrains of the Tertiary mountains bordering the coastal plain.