Geotechnical aspects of fine-grained mass flow deposits: California Continental Borderland

Seismic reflection profiling demonstrates the importance of mass movement in the north-central California Borderland. Bulk properties of surficial hemipelagic sediments in the Santa Barbara, Santa Cruz, and San Nicolas basins show that different types of mass-transported sediments have different properties, although their general sedimentologic characteristics are very similar. Slump deposits have moderate water contents (48% wet weight basis), high plasticity indices (46%), and moderate activities (1.6). For debris flows these values are low: 28%, 5%, and 0.3, respectively, and for other types (liquefied flow, mudflows, and turbidities) the values are high: 54 to 63%, 49 to 58%, and 1.2 to 1.5, respectively.     

Sea-structure interaction for tripod-type steel gravity platform

The paper deals with a numerical integrated procedure to calculate the effects of the interaction between sea waves and a tripod-type steel gravity platform. The main aspects to be taken into account for a reliable wave loading analysis of such a new type of platform are emphasized. Among them, the field perturbation effect due to the large bodies presence is analysed. Finally, some principal results in terms of structure global loads obtained by the numerical integrated procedure are presented.     

Waveform Shaping of Sonar Transducers for Improving the Vertical Resolution in Sub-bottom Sediments Profiling

Vertical resolution is of fundamental importance in sonar exploration and is directly related to the duration of the acoustic pulse generated by the transducer. The shorter the radiated pulse, the higher the vertical resolution. Many sub-bottom profiling sonar systems use piezoelectric transducers because they are reversible and well understood. Piezoelectric projectors are normally resonant transducers, which are intrinsically narrowband. A piezoelectric transducer is usually driven by a tone-burst. However, it is possible to use Fourier techniques to find a pre-compensated electrical driving function so that the transducer radiates a prescribed wider band acoustic waveform. This technique can be applied to synthesize zero-phase cosine-magnitude, Gaussian, and bionic pulses, with a conventional sandwich transducer. Zero-phase cosine-magnitude waveforms provide minimum length pulses (and therefore maximum resolution) within a prescribed frequency band.The aim of this paper is to illustrate the synthesis of wideband acoustic pulses using an underwater piezoelectric projector. The conventional acoustic waveform radiated when a Tonpiltz transducer is transiently excited using a “click” and allows its frequency response function to be measured. This function is used to design the electrical signal which then drives the transducer so that it radiates the shortest pulse compatible with its mechanical response. The significant resolution enhancement of the waveform shaping process is illustrated by its application to a sediment wedge model.     

An application of a Markov-chain model of shore erosion for describing the dynamics of sediment flux

Acquisition of coastline retreat rate time sequences (RRTS) is an important component of Arctic coastal monitoring. These data can be used not only to estimate sediment input into the sea during a fixed time period, but also to dynamically simulate sediment flux intensity. The RRTS were investigated at the Marre-Sale (Kara Sea) and Malii Chukochii Cape (East Siberian Sea) key sites. Statistical analysis demonstrated that the RRTS possess Markov characteristic. This allowed coastline dynamics to be described using a Markov-chain model. A model is discussed that combines Markov characteristic and information about the composition and structure of the permafrost sediments to describe sediment flux dynamics.     

Robust adaptive control of underactuated ships on a linear course with comfort

This paper addresses an important problem in ship control application—the robust stabilization of underactuated ships on a linear course with comfort. Specifically, we develop a multivariable controller to stabilize ocean surface ships without a sway actuator on a linear course and to reduce roll and pitch simultaneously. The controller adapts to unknown parameters of the ship and constant environmental disturbances induced by wave, ocean current and wind. It is also robust to time-varying environmental disturbances, time-varying change in ship parameters and other motions of the ship such as surge and heave. The roll and pitch can be made arbitrarily small while the heading angle and sway are kept to be in reasonably small bounds. The controller development is based on Lyapunov’s direct method and backstepping technique. A Lipschitz continuous projection algorithm is used to update the estimate of the unknown parameters to avoid the parameters’ drift due to time-varying environmental disturbances. Simulations on a full-scale catamaran illustrate the effectiveness of our proposed controller.     

Modeling bed-load transport of coarse sediments in the Great Bay Estuary, New Hampshire

Current, sea level and bed-load transport are investigated in the Lower Piscataqua River section of the Great Bay Estuary, New Hampshire, USA—a well-mixed and geometrically complex system with low freshwater input, having main channel tidal currents ranging between 0.5 and 2 m s⁻¹. Current and sea level forced by the M₂M₄M₆ tides at the estuarine mouth are simulated by a vertically averaged, non-linear, time-stepping finite element model. The hydrodynamic model uses a fixed boundary computational domain and accounts for flooding–drying of tidal flats by making use of a groundwater component. Inertia terms are neglected in comparison with pressure gradient and bottom friction terms, which is consistent with the observed principal dynamic balance for this section of the system. The accuracy of hydrodynamic predictions in the study area is demonstrated by comparison with four tidal elevation stations and two cross-section averaged current measurements. Simulated current is then used to model bed-load transport in the vicinity of a rapidly growing shoal located in the main channel of the lower system. Consisting of coarse sand and gravel, the shoal must be dredged every five to eight years. Two approaches are taken—an Eulerian parametric method in which nodal bed-load flux vectors are averaged over the tidal cycle and a Lagrangian particle tracking approach in which a finite number of sediment particles are released and tracked. Both methods yield pathways and accumulations in agreement with the observed shoal formation and the long-term rate of sediment accumulation in the shoal area.     

The relationship between the amplitudinal characteristics of the high-frequency spectral components of wind-generated waves and the wind velocity over the sea

The relationship between the RMS amplitudes of the wind wave spectral components and the wind speed has been studied at ten frequencies in the band of 0.65–23 Hz. To measure the parameters of the high-frequenci waves, a resistance elevation wave gauge was operated, which was deployed in the Black See on an oceanographic platform near Katsively. The correlation between the wave amplitudes and the wind velocity at high frequencies of 5–23 Hz, corresponding to gravitation-capillary ripples, was found to reach a value of 0.8. At lower frequencies of 0.65–4.3 Hz, corresponding to short gravity waves, it dropped to 0.5–0.7. The response of spectral components to the wind speed variations in the gravity-capillary range is higher than in the range of short gravity waves. The results obtained differ from Phillips' idea about a saturated range for the frequency form of the spectrum of high-frequency gravity waves, since a linear dependence of the spectral amplitudes on the wind speed is established at a wind of force 1–8.Translated by Mikhail M. Trufanov.     

Numerical experiments with data assimilation in the simplest dynamic-stochastic model for the ocean's synoptic variability closed at the level of the second moments

The results of numerical experiments with data assimilation in a non-linear model of the synoptic dynamics of the world's oceans are reported. The model's response to the data assimilation is studied at different values of the relative error in determining the initial fields and assimilation discreteness. The results of application of the algorithms of optimum filtration and optimum interpolation are compared. The advantages of the filtration algorithm employed are discussed only for the case of small errors in determining the initial fields and low assimilation discreteness. The possibility of deterioration of the prediction estimates in data assimilation with discreteness less than the typical time of variability of the average fields is noted.Translated by Mikhail M. Trufanov.