Integrated geophysics and soil gas profiles as a tool to characterize active faults: the Amer fault example (Pyrenees, NE Spain)

The combined use of geophysical and soil gas composition exploration methods allows to rapidly obtain at relative low cost information that might be related to seismic activity conditions. In this study, we carried out geochemical soil gas sampling (²²²Rn, ²²⁰Rn and CO₂), electrical resistivity tomography and seismic refraction profiles in two selected zones near the town of Amer in the Spanish Pyrenees, where the presence of recent fractures is evident in the field. Data analysis clearly reveals anomalous values for each gas at specific positions along the electrical imaging transects. Geomorphologic and hydrogeologic data and the integration of geophysical data and soil gas measurements indicate that: (1) endogene gases radon (²²²Rn) and carbon dioxide (CO₂) are released from the meta-sedimentary basement rocks across the main fractured zones with higher permeability values, while lower Cenozoic detrital sedimentary formations act as an impervious boundary; (2) sites with highest radon concentrations (52?kBq?m^?3) coincide with the zones in the Amer fault showing more recent geomorphic evidence of activity, and more specifically with those areas covered by thinner surficial formations; (3) the lowest ²²²Rn values (0.2?C0.4?kBq?m^?3) were recorded just on the master active fault plane. This pattern could be explained by a dilution effect resulting from high rates of soil CO₂ efflux (267?g?m^?2?day^?1); (4) soil thoron (²²⁰Rn) activity is maximum (143?kBq?m^?3) in areas with high surficial fracturing; (5) groundwater pumping may cause important distortions in the natural flow dynamics and in the measured concentrations of gases. The agreement between the different data (geochemical, geophysical, and hydrogeological) and field observations (geology and geomorphology) leads us to propose a preliminary tectonic-gravitational model for the study area.     

Enthalpies in (Na,Ca)- and (K,Ca)-feldspar binaries: a high-temperature solution calorimetric study

A series of high structural state plagioclases (Ab-An) was crystallized from glasses. By exchanging Na for K in KCl melts, metastable K-plagioclases (Or-An) were prepared which possess the same structural state as the starting plagioclases. Both series were investigated at 980 K by lead borate solution calorimetry. Continuing the ideas of Carpenter and McConnell (1984) and Carpenter (1992a), the results can be interpreted as follows. In the high plagioclase series, the enthalpies of solution, jH_sol, reflect the schemes of Al,Si ordering: (1) analbite-like (C2/m) ordering in the An-poor region 0hX_AnА.2, (2) high albite-like (C1¥) ordering in intermediate plagioclases, and (3) anorthite-like (I1¥) ordering in the An-rich region 0.7AnБ. In regions 1 and 2, jH_sol decreases as a function of X_An, but increases in region 3 as a consequence of the C1¥MI1¥ ordering reaction. Therefore, it is not a mixing effect but a compositionally restricted ordering effect which causes the excess enthalpies, jH^ex, to be positive in the plagioclase binary as a whole. Neglecting the existence of phase transitions at X_An=0.2 and X_An=0.7, jH^ex can be approximated by a two-parameter Margules model yielding W^H_AnAb=14Dž kJ/mol and W^H_AbAn=40Dž kJ/mol. jH_sol values of I1¥ plagioclases (X_An>0.7) can be "corrected" for the C1¥MI1¥ ordering effect (Carpenter 1992a). When combining the corrected values with the jH_sol data which were actually measured on the C1¥ plagioclases (X_An<0.7), negative excess enthalpies are generated in the plagioclase binary. This may be expected when C1¥ ordering occurs relative to topochemically monoclinic reference states of analbite and hypothetical anorthite devoid of I1¥ order. The solution experiments on the K-plagioclases resulted in similar characteristics as those found for the plagioclases. However, in addition to the ordering effects observed in the plagioclase binary, volume mismatch effects contribute to jH^ex in the K-plagioclase series. jH^ex can be represented by a Margules model with W^H_AnOr=60ᆞ kJ/mol and W^H_OrAn=91ᆢ kJ/mol when the phase transitions at X_An=0.2 and X_An=0.7 are again neglected. The contribution of the volume mismatch effect to jH^ex is considerable, as appears from the large difference between the K-plagioclase and the plagioclase Margules parameters. Their difference corresponds to a practically symmetrical dependence of jH^ex_volmism on composition, with W^H_volmism=48ᆡ kJ/mol.     

Neo-Deterministic and Probabilistic Seismic Hazard Assessments: a Comparison over the Italian Territory

Estimates of seismic hazard obtained using the neo-deterministic approach (NDSHA) and the probabilistic approach (PSHA) are compared for the Italian territory. The NDSHA provides values larger than those given by the PSHA in areas where large earthquakes are observed and in areas identified as prone to large earthquakes, but lower values in low-seismicity areas. These differences suggest the adoption of the flexible, robust and physically sound NDSHA approach to overcome the proven shortcomings of PSHA, thus allowing for a reliable seismic hazard estimation, especially for those areas characterized by a prolonged quiescence, i.e. in tectonically active sites where events of only moderate size have occurred in historical times.     

Fast detection of chaotic behavior in galactic potentials

In the present paper we apply a new method of distinction between ordered and chaotic motion in galactic potentials. The method uses the Fourier Transform of a series of time intervals each one representing the time that elapsed between two successive points on the Poincaré surface of section. Examples of the methods ability to achieve an early and clear detection of an orbit's behavior are provided using two galactic potentials. The new method can also be applied in order to have an early distinction between ordered and sticky orbits. The method is generalized in order to be used in models with more than two dimensions. Finally we have tried to find an one‐number index to give us the nature of the orbit instead of checking by eye the whole spectrum. (© 2008 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Spatially resolved methane band photometry of Saturn: I. Absolute reflectivity and center-to-limb variations in the 6190-, 7250-, and 8900-Å bands

We present spatially resolved measurements of Saturn's absolute reflectivity in methane bands at 6190, 7250, and 8900 Å and in nearby continuum regions. Images were obtained through narrow-band interference filters with a 500 × 500-pixel charge-coupled device. Band/continuum ratios were measured to high accuracy by referencing to the ring brightness in each image. Several data processing techniques enhanced the quality of the observations. These are the use of the ring symmetry to find center position and orientation, accurate subtraction of ring light, and constrained image deconvolution. Uncertainty in the continuum absolute reflectivity is ±10%. Uncertainties in band/continuum ratios are from one to several percent. The Equatorial Zone was much brighter than any other latitude in the strong 8900 band image. Northern mid-latitudes were brighter than southern mid-latitudes. The latter observation indicates fewer high-altitude aerosols in the south, a possible result of atmospheric dynamics or seasonal sublimation of NH₃ crystals. The data are tabulated and presented in a form suitable for quantitative scattering model analyses.     

Layered mantle structure beneath the western Guyana Shield, Venezuela: Evidence from diamonds and xenocrysts in Guaniamo kimberlites

Mantle xenoliths and xenocrysts from Guaniamo, Venezuela kimberlites record equilibration conditions corresponding to a limited range of sampling in the lithosphere (100-150 km). Within this small range, however, compositions vary considerably, but regularly, defining a strongly layered mantle sequence. Major and trace element compositions suggest the following lithologic sequence: highly depleted lherzolite from 100 to 115 km, mixed ultra-depleted harzburgite and lherzolite from 115 to 120 km, relatively fertile lherzolite from 120 to 135 km, and mixed depleted harzburgite and relatively fertile lherzolite from 135 to 150 km. Based on comparison with well-documented mantle peridotites and xenocrysts from elsewhere, we conclude that the Meso-proterozoic Cuchivero Province (host to the Guaniamo kimberlites) is underlain by depleted and ultra-depleted shallow Archean mantle that was underplated, and uplifted, by Proterozoic subduction, perhaps more than once. These Proterozoic subduction events introduced less-depleted oceanic lithosphere beneath the Archean section, which remains there and is the source of the abundant Guaniamo eclogite-suite diamonds that have ocean-floor geochemical signatures. Although diamond-indicative low-Ca Cr-pyrope garnets are abundant, they are derived primarily from the shallow depleted layer within the field of graphite stability, and the rare peridotite-suite diamonds are either metastably preserved at these shallow depths, or were derived from the small amount of depleted lithosphere sampled by these kimberlites that remains within the diamond stability field (the mixture of Archean and Proterozoic mantle in the depth range 135-150 km).     

The Darasun gold deposit,Eastern Transbaikal region: Chemical composition,REE patterns,and stable carbon and oxygen isotopes of carbonates from ore veins

The chemistry, REE patterns, and carbon and oxygen isotopic compositions of carbonates from ore veins of the Darasun deposit are discussed. In addition to the earlier described siderite, calcite, and carbonates of the dolomite-ankerite series, kutnahorite is identified. The total REE content in Fe-Mg carbonates of the dolomite-ankerite series (2.8–73 ppm) is much lower than in later calcite (18–390 ppm). δ¹³C of Fe-Mg carbonates and calcite varies from +1.1 to −6.7‰ and from −0.9 to −4.9‰, respectively. δ¹⁸O of Fe-Mg carbonates and calcite varies from +17.6 to 3.6‰ and from +15.7 to −0.5‰, respectively. The REE sum and carbon and oxygen isotopic compositions reveal zonal distribution relative to the central granodiorite porphyry stock. The correlation between the carbon and oxygen isotopic compositions and REE sum reflects variations in the physicochemical formation conditions and composition of ore-forming fluid. The isotopic composition of fluid is calculated, and possible sources of its components are considered. Earlier established evidence for a magmatic source of ore-forming fluid and participation of meteoric water in ore formation is confirmed. Geochemical evidence for interaction of ore-forming fluid with host rocks is furnished. The relationships between the REE sum, on the one hand, and carbon and oxygen isotopic compositions of hydrothermal ore-forming fluid, on the other, are established.