Formalization of assessing radioactive waste burial site seismic regime parameters from seismological and geological data

A model is proposed that shows the relation of the block structure of the crust and earthquake sources (Sadovskii, 1979; Rodionov, 1979, 1984, 1994; Bugaev, 1999, 2011, 2014, 2015). The model can formalize how to assess the prediction of seismic regime parameters depending on the elastic limit and conditions and rate of deformation of the Earth’s crust. The spent nuclear fuel repository site in Olkiluoto (Finland) and a site in the area of the Krasnoyarsk Mining and Chemical Combine are considered as examples. It is demonstrated that the parameters of the prediction graphs limit the location of the points of magnitude repeatability graphs calculated for a site based on samples of earthquakes in the area according to different authors. This makes it possible to recommend predictive assessment of seismic regime parameters for stability monitoring of the seismic regime and safety analysis of a geological environment’s insulation properties for waste sites from the results of seismological monitoring and high-precision observations of modern movements of the Earth’s crust.     

Soil bentonite wall protects foundation from thrust faulting: analyses and experiment

When seismic thrust faults emerge on the ground surface,they are particularly damaging to buildings,bridges and lifelines that lie on the rupture path.To protect a structure founded on a rigid raft,a thick diaphragm-type soil bentonite wall(SBW) is installed in front of and near the foundation,at sufficient depth to intercept the propagating fault rupture.Extensive numerical analyses,verified against reduced–scale(1 g) split box physical model tests,reveal that such a wall,thanks to its high deformability and low shear resistance,"absorbs" the compressive thrust of the fault and forces the rupture to deviate upwards along its length.As a consequence,the foundation is left essentially intact.The effectiveness of SBW is demonstrated to depend on the exact location of the emerging fault and the magnitude of the fault offset.When the latter is large,the unprotected foundation experiences intolerable rigid-body rotation even if the foundation structural distress is not substantial.     

Application of saddlepoint approximation in reliability analysis of dynamic systems

The application of the saddlepoint approximation to reliability analysis of dynamic systems is investigated. The failure event in reliability problems is formulated as the exceedance of a single performance variable over a prescribed threshold level. The saddlepoint approximation technique provides a choice to estimate the cumulative distribution function (CDF) of the performance variable. The failure probability is obtained as the value of the complement CDF at a specif ied threshold. The method requires computing the saddlepoint from a simple algebraic equation that depends on the cumulant generating function (CGF) of the performance variable. A method for calculating the saddlepoint using random samples of the performance variable is presented. The applicable region of the saddlepoint approximation is discussed in detail. A 10-story shear building model with white noise excitation illustrates the accuracy and effi ciency of the proposed methodology.     

Lateral continuity of basement seismic reflections in 15 Ma ultrafast-spreading crust at ODP Site 1256

The Ocean Drilling Program (ODP) initiated drilling at Site 1256D in the Guatemala Basin, about 1,000 km off the East Pacific Rise to penetrate plutonic rocks, anticipated to be relatively shallow in this region, formed at an ultra-fast spreading rate. IODP Expedition E312 successfully drilled into gabbros at ~1,150 m in basement. Multi-channel seismic traces show weak laterally coherent sub-basement reflections at borehole depths. Synthetic reflectivity seismograms were computed using a Ricker wavelet and impedance profiles from borehole sonic logs. These seismograms show significant sub-basement amplitude peaks. A zero-offset vertical seismic profile, shot on E312, was processed to investigate the authenticity of these reflections and their relationship to borehole geology. A dual scheme of the median filtering and F–K dip filtering was used. Tests with synthetic seismograms indicate the approach is effective at reasonable SNR levels. Downgoing energy is clearly identified but negligible upgoing energy is visible over random noise. These results indicate that lava flows and igneous contacts in upper ocean crust have significant topography on lateral scales less than the Fresnel Zone (~300 m) due to igneous and tectonic processes.     

Wiener optimal filtering of GRACE data

We present a spatial averaging method for Gravity Recovery and Climate Experiment (GRACE) gravity-field solutions based on the Wiener optimal filtering. The optimal filter is designed from the least-square minimization of the difference between the desired and filtered signals. It requires information about the power spectra of the desired gravitational signal and the contaminating noise, which is inferred from the average GRACE degree-power spectrum. We show that the signal decreases with increasing spherical harmonic degree j with approximately j^−b, where b = 1.5 for GRACE data investigations. This is termed the Second Kaula rule of thumb for temporal variations of the Earth’s gravity field. The degree power of the noise increases, in the logarithmic scale, linearly with increasing j. The Wiener optimal filter obtained for the signal model with b = 1.5 closely corresponds to a Gaussian filter with a spatial half width of 4° (∼440 km). We find that the filtered GRACE gravity signal is relatively insensitive to the exponent b of the signal model, which indicates the robustness of Wiener optimal filtering. This is demonstrated using the GFZ-GRACE gravity-field solution for April 2004.     

An inter-comparison of tidal solutions computed with a range of unstructured grid models of the Irish and Celtic Sea Regions

Three finite element codes, namely TELEMAC, ADCIRC and QUODDY, are used to compute the spatial distributions of the M₂, M₄ and M₆ components of the tide in the sea region off the west coast of Britain. This region is chosen because there is an accurate topographic dataset in the area and detailed open boundary M₂ tidal forcing for driving the model. In addition, accurate solutions (based upon comparisons with extensive observations) using uniform grid finite difference models forced with these open boundary data exist for comparison purposes. By using boundary forcing, bottom topography and bottom drag coefficients identical to those used in an earlier finite difference model, there is no danger of comparing finite element solutions for “untuned unoptimised solutions” with those from a “tuned optimised solution”. In addition, by placing the open boundary in all finite element calculations at the same location as that used in a previous finite difference model and using the same M₂ tidal boundary forcing and water depths, a like with like comparison of solutions derived with the various finite element models was possible. In addition, this open boundary was well removed from the shallow water region, namely the eastern Irish Sea where the higher harmonics were generated. Since these are not included in the open boundary, forcing their generation was determined by physical processes within the models. Consequently, an inter-comparison of these higher harmonics generated by the various finite element codes gives some indication of the degree of variability in the solution particularly in coastal regions from one finite element model to another. Initial calculations using high-resolution near-shore topography in the eastern Irish Sea and including “wetting and drying” showed that M₂ tidal amplitudes and phases in the region computed with TELEMAC were in good agreement with observations. The ADCIRC code gave amplitudes about 30 cm lower and phases about 8° higher. For the M₄ tide, in the eastern Irish Sea amplitudes computed with TELEMAC were about 4 cm higher than ADCIRC on average, with phase differences of order 5°. For the M₆ component, amplitudes and phases showed significant small-scale variability in the eastern Irish Sea, and no clear bias between the models could be found. Although setting a minimum water depth of 5 m in the near-shore region, hence removing wetting and drying, reduced the small-scale variability in the models, the differences in M₂ and M₄ tide between models remained. For M₆, a significant reduction in variability occurred in the eastern Irish Sea when a minimum 5-m water depth was specified. In this case, TELEMAC gave amplitudes that were 1 cm higher and phases 30° lower than ADCIRC on average. For QUODDY in the eastern Irish Sea, average M₂ tidal amplitudes were about 10 cm higher and phase 8° higher than those computed with TELEMAC. For M₄, amplitudes were approximately 2 cm higher with phases of order 15° higher in the northern part of the region and 15° lower in the southern part. For M₆ in the north of the region, amplitudes were 2 cm higher and about 2 cm lower in the south. Very rapid M₆ tidal-phase changes occurred in the near-shore regions. The lessons learned from this model inter-comparison study are summarised in the final section of the paper. In addition, the problems of performing a detailed model–model inter-comparison are discussed, as are the enormous difficulties of conducting a true model skill assessment that would require detailed measurements of tidal boundary forcing, near-shore topography and precise knowledge of bed types and bed forms. Such data are at present not available.     

Evolution and observational signature of diffused antiworld

The existence of macroscopic regions with antibaryon excess in the baryon asymmetric Universe with general baryon excess is the possible consequence of practically all models of baryosynthesis. Diffusion of matter and antimatter to the border of antimatter domains defines the minimal scale of the antimatter domains surviving to the present time. A model of diffused antiworld is considered, in which the density within the surviving antimatter domains is too low to form gravitationally bound objects. The possibility to test this model by measurements of cosmic gamma ray fluxes is discussed. The expected gamma ray flux is found to be acceptable for modern cosmic gamma ray detectors and for those planned for the near future.