Ridge development as revealed by sub-bottom profiles on the central New Jersey shelf

Closely-spaced 3.5 kHz seismic profiles were collected over the north-easterly trending ridge and swale system 50 km east-southeast of Atlantic City, New Jersey. They yield information on the Late Quaternary depositional history of the area, and on the origin of the ridge system. Four of the sub-bottom reflectors identified were sufficiently persistent to warrant investigation and interpretation. These reflectors, which have been cored, lithologically identified, and radiocarbon dated, are stratigraphically higher than the reflectors dealt with by the majority of previous studies. The upper three reflectors are definitely mid- and post-Wisconsin in age and present a record of the most recent glacial cycle. The upper three units associated with the observed reflectors appear to exert a pronounced influence on the bathymetry. The gently corrugated ridge system of Holocene sand is formed over the regionally flat-lying upper unit, an Early Holocene lagoonal silty clay. The characteristically flat, broad depressions of the area are floored by this lagoonal material. Locally, however, marine scour has cut through the silty clay into an underlying unit of unconsolidated fine Pleistocene sand. Several stages of trough development appear to be represented. After penetrating the lagoonal clay, troughs are initially narrow, but when incised through the sand into a lower, Pleistocene, silty-clay unit, the troughs become notably wider. As downcutting is inhibited by the lower clay, the upper clay is undercut as the trough widens in a fashion similar to a desert blowout.

The sub-bottom reflectors indicate that ridge development on the central shelf has involved aggradation as well as erosion. Some ridges seem to have grown by vertical and lateral accretion from small cores. The internal structure of other ridges suggests that they formed by the coalescence of several small ridges. Others appear to have undergone appreciable lateral migration.

The ridges appear to be in a state of continuing adjustment to the hydraulic regime of the deepening post-Pleistocene water column.     

Estimation of winds over the sea from land-based measurements

Simultaneous measurements of wind velocities at two different sites, one over the sea and the other over land, can differ substantially and therefore cannot be interchanged. In situations where the wind data at an offshore site are missing while simultaneous measurements from a land-based station exist, a linear mean-square estimation (LMSE) technique can be used to estimate the missing data. This technique relies on past wind data gathered simultaneously at the two locations, and it generates from the associated correlation a set of four transfer functions capable of predicting one data set from the other. In the present case, the LMSE technique is outlined briefly, and is then applied to construct seasonal transfer functions between a land-based station and two coastal/offshore sites in Kuwait. Comparisons between the actually observed wind characteristics and those predicted by the LMSE technique are favorable, and thus tend to confirm the applicability of the technique under appropriate conditions.     

Offshore permafrost and gas hydrate stability zone on the shelf of East Siberian Seas

Dynamics of the submarine permafrost regime, including distribution, thickness, and temporal evolution, was modeled for the Laptev and East Siberian Sea shelf zones. This work included simulation of the permafrost-related gas hydrate stability zone (GHSZ). Simulations were compared with field observations. Model sensitivity runs were performed using different boundary conditions, including a variety of geological conditions as well as two distinct geothermal heat flows (45 and 70 mW/m²). The heat flows used are typical for the coastal lowlands of the Laptev Sea and East Siberian Sea. Use of two different geological deposits, that is, unconsolidated Cainozoic strata and solid bedrock, resulted in the significantly different magnitudes of permafrost thickness, a result of their different physical and thermal properties. Both parameters, the thickness of the submarine permafrost on the shelf and the related development of the GHSZ, were simulated for the last four glacial-eustatic cycles (400,000 years). The results show that the most recently formed permafrost is continuous to the 60-m isobath; at the greater depths of the outer part of the shelf it changes to discontinuous and patchy permafrost. However, model results suggest that the entire Arctic shelf is underlain by relic permafrost in a state stable enough for gas hydrates. Permafrost, as well as the GHSZ, is currently storing probable significant greenhouse gas sources, especially methane that has formed by the decomposition of gas hydrates at greater depth. During climate cooling and associated marine regression, permafrost aggradation takes place due to the low temperatures and the direct exposure of the shelf to the atmosphere. Permafrost degradation takes place during climate warming and marine transgression. However, the temperature of transgressing seawater in contact with the former terrestrial permafrost landscape remains below zero, ranging from –0.5 to –1.8°C, meaning permafrost degradation does not immediately occur. The submerged permafrost degrades slowly, undergoing a transformation in form from ice bonded terrestrial permafrost to ice bearing submarine permafrost that does not possess a temperature gradient. Finally the thickness of ice bearing permafrost decreases from its lower boundary due to the geothermal heat flow. The modeling indicated several other features. There exists a time lag between extreme states in climatic forcing and associated extreme states of permafrost thickness. For example, permafrost continued to degrade for up to 10,000 years following a temperature decline had begun after a climate optimum. Another result showed that the dynamic of permafrost thickness and the variation of the GHSZ are similar but not identical. For example, it can be shown that in recent time permafrost degradation has taken place at the outer part of the shelf whereas the GHSZ is stable or even thickening.     

Non-linear model for the generation of baroclinic tides over extensive inhomogeneities of the seabed relief

A numerical model is developed for the generation of internal waves induced by a barotropic tidal wave travelling over large bottom features. Motion equations consider the non-linear terms, as well as the terms responsible for horizontal turbulent exchange. The fluid is assumed to be continuously stratified. In the framework of the developed model, a packet of short non-linear internal waves is shown to occur together with a long baroclinic tide. In the absence of non-linear terms in the equations of motion, the model data are qualitatively and quantitatively consistent with the data provided by known linear models.Translated by V. Puchkin.     

A densely sampled core and climate variable aliasing

Undersampled records are susceptible to aliasing, in which a high frequency appears incorrectly as a lower one. We study the sampling requirements in a core taken from Rockall Trough using bulk density, P-wave velocity, and magnetic susceptibility as measured on an automated system. At 2-cm spacing (approximately 33 years in this core), all variables show a characteristic red-noise behavior, but with a spectral slope that is sufficiently weak so that significant aliasing appears to be present. P-wave velocity shows the largest potential corruption, probably owing to the weaker spatial averaging present in the sensor. Approximately 50% of the apparent low-frequency energy is aliased in all variables at some frequencies in both quiet and active regions of the record. In this core, a sampling interval of 0.2 cm appears to be "safe" in both active and quiet portions of the core, aliasing little or no energy, except in the P-wave record. For cores of different duration, sampling interval, and measurement type, the considerations will be identical, the importance of the problem depending directly upon the shape of the overall spectrum describing the entire frequency (wavenumber) range of physical variability.     

Physical and biological factors influencing the spatial distribution of age-0 walleye pollock (Theragra chalcogramma) around the Pribilof Islands, Bering Sea

The waters around the Pribilof Islands, in the southeast Bering Sea, are a main nursery area for age-0 pollock. Each summer, the islands are surrounded by a well-mixed inshore region, separated from a stratified offshore region by a frontal zone. To study the spatial distribution of age-0 pollock around this frontal structure in relation to physical and biological factors that are likely to influence it, such as advection, age-0 pollock feeding, and predation, samples were collected during September of four consecutive years, 1994–97, along two transects. Samples collected included water column hydrography and currents, acoustic backscatter, and groundfish predator density.Our analysis suggested that different mechanisms may be involved in controlling age-0 pollock distribution north and south of the islands. On the shelf area north of the islands, high age-0 pollock density was significantly associated with areas of high potential for growth only in years or portions of the frontal transect in which predator numbers were relatively low, indicating the importance of predation in controlling fish distribution in this area. In contrast, south of the islands, age-0 pollock distribution was associated more with prey availability, which appeared to be determined by vertical spatial overlap between predators and prey. Moreover, south of the islands, the stronger geostrophic currents, typical of the slope region, were more likely to affect the overall standing biomass of juvenile pollock, by constantly advecting fish away from the area.     

An experimental pressure compensated wet suit

Personal thermal insulation by means of neoprene from wet suits provides adequate temporary control of body heat loss only at the shallow end of the air diving depth range, but it constitutes by far the most popular approach to diver thermal support. Howewer, compression of the trapped gas phase in neoprene foam seriously reduces its insulation performance on exposure to high ambient pressure. With conventional wet suits equipped with heating, the necessary level of power required at depths greater than about 30 m is too high, and also unsafe without the back up that increased insulation would provide. One approach to the goal of depth-insensitive insulation is to use a wet suit with a continuous internal gas space pressurized nominally to ambient pressure, so that its thickness remains substantially constant at all depths. The composite material properties required are: outer skins that are tough, flexible and free of pin holes; an open foam internal structure capable of resisting, without significant dimensional change, the relatively small pressure changes that occur over the height of a man; and a high bond strength.Samples of a composite material that meets these requirements have been developed, and a prototype suit has been successfully fabricated by conventional techniques.     

Statistical characteristics of currents and seawater temperature near the Florida Strait

Average and extreme values of the current velocity, seawater temperature, and their standard deviations are considered on the basis of measurements carried out at three moorings deployed in the Florida Strait. The contributions of the low-frequency (synoptic) and mesoscale variations of currents and the seawater temperature to their temporal variability are estimated. The kinetic energy values of the averaged current and the synoptic and mesoscale variations are given. Their contributions to the general (total) kinetic energy of currents are determined. It is shown that the pulsations of the north-east trade wind can be one of the reasons for the synoptic variations in the field of currents and seawater temperature.Translated by Mikhail M. Trufanov.