landslide due to mass sinking phenomenon: Sunil-Joshimath of U.P. Himalaya example

Mass sinking associated with soil creep and debris displacement is mainly responsible for landslide in Sunil area of Joshimath hill complex. Seepage plays the important role in soil subsidence. The area representing moderate to high relief denudational hills, shows rarely any insitu rock exposures. Gneissic boulders are embedded in loose sandy soil where due to presence of many springs excess seepage occurs, causing a soil creep and displacement of the bou.ders giving rise to local sinking.     

Hydromorphology of a part of Azamgarh and Ghazipur districts,Uttar Pradesh

Hydrogeological studies in the Quaternary alluvial plain of a part of Azamgarh and Ghazipur districts, using air photos on scale 1:60,000 indicate the presence of five hydromorphic units namely, Alluvial upland, older alluvial plain of Mangat-Besu, older flood plain of Ganga—Gomti, youngest terrace of Ganga—Gomti and present flood plain of Ganga-Gomti. From the groundwater point of view older flood plain of Ganga—Gomti is the most promising hydromorphic unit. Abandoned channel of river Ganga offers favourable site for deep groundwater exploration with high potentiality. Chemical quality of shallow and deep aquifers is suitable for irrigation and other purposes.     

The role of multispectral imagery in elucidation of recent channel pattern changes in middle ganga plain

The mapability of Landsat images has opened up a new potentiality for study of channel pattern changes which was earlier not so easy due to nonavailability of suitable evidences at different timespans. Middle Ganga plain covering largely the northern part of Bihar and parts of eastern Uttar Pradesh is in a slate of perpetual flux due to large scale channel migration and avulsion resulting in devastating floods. Mosaic of three Landsat images has helped to study the channel changes which have occurred since 1935. The course of the river Ganga has beeh digitised along a basal line and two dimensional coordinates are taken at as many as more than fifty sample points for studying the magnitude and direction of channel changes during 1935–1975 period. The analysis shows that the main multiple channel river Ganga is under the huge hydrostatic thrust to be shifted towards south of its basin annually at a very high rate of 100 Meter per year all along the course except at its upstream near Ghazipur and at Monghyr where the shifting is towards north. The northward bend at Monghyr may be due to the presence of the Precambrian outliers here. For the multi-and single channelld tributaries of Ganga in channel behaviour is mainly in three directions—the lower water channels in the floodplain of Ganga are shifting to the south in conformity with that of their parent stream, the tributaries in Gogra-Gandak doab are shifting towards east but the shifting of the Kosi-Mahananda group of tributaries in the eastern part of the basin is towards west These channel pattern changes thus known at the interregional scale from the Landsat images may further be integrated with the study in hydrogeomorphology and their pertinent environmental impact.     

Linkage of paraglacial processes from last glacial to recent inferred from Spituk sequence,Leh valley,Ladakh Himalaya

The paraglacial sequence in the Leh valley, Ladakh Himalaya preserves imprints of various processes active during deglaciation in the late phase of Last Glacial. In present work, a high resolution sedimentological record generated for Spituk is presented identifying aeolian episodes, mudflow events from Ladakh Range and debris flows extending from Zanskar Range across present Indus River. Two temporal phases of water ponding within Spituk Sequence are also identified. The seismites recorded at various stratigraphic depths and their association with the sediment facies signifies gravity induced process besides possible seismic activity as an added phenomena. Linkage between paraglacial processes since Last Glacial to Recent is tracked and evaluated.     

A generalized geo-hazard warning system

An automated geo-hazard warning system is the need of the hour. It is integration of automation in hazard evaluation and warning communication. The primary objective of this paper is to explain a geo-hazard warning system based on Internet-resident concept and available cellular mobile infrastructure that makes use of geo-spatial data. The functionality of the system is modular in architecture having input, understanding, expert, output and warning modules. Thus, the system provides flexibility in integration between different types of hazard evaluation and communication systems leading to a generalized hazard warning system. The developed system has been validated for landslide hazard in Indian conditions. It has been realized through utilization of landslide causative factors, rainfall forecast from NASA??s TRMM (Tropical Rainfall Measuring Mission) and knowledge base of landslide hazard intensity map and invokes the warning as warranted. The system evaluated hazard commensurate with expert evaluation within 5?C6?% variability, and the warning message permeability has been found to be virtually instantaneous, with a maximum time lag recorded as 50?s, minimum of 10?s. So it could be concluded that a novel and stand-alone system for dynamic hazard warning has been developed and implemented. Such a handy system could be very useful in a densely populated country where people are unaware of the impending hazard.     

Significance of transition between Talchir Formation and Karharbari Formation in Lower Gondwana basin evolution — A study in West Bokaro Coal basin, Jharkhand, India

Basal part of the Gondwana Supergroup represented by Talchir and Karharbari Formations (Permo-Carboniferous) records an abrupt change-over from glacio-marine to terrestrial fluviolacustrine depositional environment. The contact between the two is an unconformity. Facies analysis of the glacio-marine Talchir Formation reveals that basal glaciogenic and reworked glaciogenic sediments are buried under storm influenced inner and outer shelf sediments. Facies associations of the Karharbari Formation suggest deposition as fluvio-lacustrine deposits in fault-controlled troughs. An attempt has been made in this paper to explain the sedimentation pattern in Talchir and Karharbari basins, and the abrupt change-over from glacio-marine to terrestrial fluviolacustrine depositional environment in terms of glacio-isostacy.     

Near N–S paleo-extension in the western Deccan region,India: Does it link strike-slip tectonics with India–Seychelles rifting?

This is the first detailed report and analyses of deformation from the W part of the Deccan large igneous province (DLIP), Maharashtra, India. This deformation, related to the India–Seychelles rifting during Late Cretaceous–Early Paleocene, was studied, and the paleostress tensors were deduced. Near N–S trending shear zones, lineaments, and faults were already reported without significant detail. An E–W extension was envisaged by the previous workers to explain the India–Seychelles rift at ~64 Ma. The direction of extension, however, does not match with their N–S brittle shear zones and also those faults (sub-vertical, ~NE–SW/~NW–SE, and few ~N–S) we report and emphasize in this work. Slickenside-bearing fault planes, brittle shear zones, and extension fractures in meso-scale enabled us to estimate the paleostress tensors (directions and relative magnitudes). The field study was complemented by remote sensing lineament analyses to map dykes and shear zones. Dykes emplaced along pre-existing ~N–S to ~NE–SW/~NW–SE shears/fractures. This information was used to derive regional paleostress trends. A ~NW–SE/NE–SW minimum compressive stress in the oldest Kalsubai Subgroup and a ~N–S direction for the younger Lonavala, Wai, and Salsette Subgroups were deciphered. Thus, a ~NW/NE to ~N–S extension is put forward that refutes the popular view of E–W India–Seychelles extension. Paleostress analyses indicate that this is an oblique rifted margin. Field criteria suggest only ~NE–SW and ~NW–SE, with some ~N–S strike-slip faults/brittle shear zones. We refer this deformation zone as the "Western Deccan Strike-slip Zone" (WDSZ). The observed deformation was matched with offshore tectonics deciphered mainly from faults interpreted on seismic profiles and from magnetic seafloor spreading anomalies. These geophysical findings too indicate oblique rifting in this part of the W Indian passive margin. We argue that the Seychelles microcontinent separated from India only after much of the DLIP erupted. Further studies of magma-rich passive margins with respect to timing and architecture of deformation and emplacement of volcanics are required.     

An innovative priming system - emulsion-based booster

The mineral industry is leading towards a technology driven optimization process. Drilling and blasting are such unit operations in a mine, which can alter the balance sheet of the mine if not planned properly. The development, improvement and utilization of innovative technologies in terms of blast monitoring instruments and explosives technology are important for cost effectiveness and safety of mineral industries.

The ever-growing demand for minerals has compelled the industry to adopt large opencast projects using heavy equipment. This has necessitated use of a few hundred tonnes of explosives in each blast. The bulk delivered fourth generation explosives have solved the problem of explosive loading to a large extent as it provides improved safety in manufacturing, transportation and handling. Bulk delivered emulsion is non-explosive until gasification is complete and a large quantity of explosive can be transported and loaded into blast holes efficiently and with safety. The priming of bulk delivered explosives in Indian mines uses the conventional PETN/TNT-based boosters. The conventional booster possesses safety problems in terms of handling and use, so Indian Explosives Ltd has developed an emulsion-based booster (Powergel Boost).

This paper explores the potential of an emulsion-based booster used as a primer to initiate bulk delivered emulsion explosives used in mines. An attempt has been made at a comparative study between the conventional booster and the emulsion-based booster in terms of the initiation process developed and their capability of developing and maintaining a stable detonation process in the column explosives. The study has been conducted using a continuous velocity of detonation (VOD) measuring instrument, the VODMate two channel system manufactured by Instantel Inc. of Canada. During this study three blasts were monitored. In each blast two holes were selected for study, the first hole was initiated using a conventional booster while the other one used an emulsion-based booster. The findings of the study advocates that the emulsion-based booster is capable of the efficient priming of bulk delivered column explosive with a stable detonation process in the column.     

Nature, origin and evolution of the granitoid-hosted early Proterozoic copper-molybdenum mineralization at Malanjkhand, Central India

At Malanjkhand, Central India, lode-type copper (-molybdenum) mineralization occurs within calcalkaline tonalite-granodiorite plutonic rocks of early Proterozoic age. The bulk of the mineralization occurs in sheeted quartz-sulfide veins, and K-silicate alteration assemblages, defined by alkali feldspar (K-feldspar ≫ albite) + dusty hematite in feldspar ± biotite ± muscovite, are prominent within the ore zone and the adjacent host rock. Weak propylitic alteration, defined by albite + biotite + epidote/zoisite, surrounds the K-silicate alteration zone. The mineralized zone is approximately 2 km in strike length, has a maximum thickness of 200 m and dips 65°–75°, along which low-grade mineralization has been traced up to a depth of about 1 km. The ore reserve has been conservatively estimated to be 92 million tonnes with an average Cu-content of 1.30%. Supergene oxidation, accompanied by limited copper enrichment, is observed down to a depth of 100m or more from the surface. Primary ores consist essentially of chalcopyrite and pyrite with minor magnetite and molybdenite. δ³⁴S (‰) values in pyrite and chalcopyrite (−0.38 to +2.90) fall within the range characteristic of granitoid-hosted copper deposits. δ¹⁸O (‰) values for vein quartz (+ 6.99 to +8.80) suggest exclusive involvement of juvenile water. Annealed fabrics are common in the ore. The sequence of events that led to the present state of hypogene mineralization is suggested to be as follows: fracturing of the host rock, emplacement of barren vein quartz, pronounced wall-rock alteration accompanied by disseminated mineralization and the ultimate stage of intense silicification accompanied by copper mineralization. Fragments of vein quartz and altered wall rocks and striae in the ore suggest post-mineralization deformation. The recrystallization fabric, particularly in chalcopyrite and sphalerite, is a product of dynamic recrystallization associated with the post-mineralization shearing. The petrology of the host rocks, hydrothermal alteration assemblages, ore mineral associations, fluid inclusions and the sulfur and oxygen isotopes of ores are comparable to those in Phanerozoic (and reported Precambrian) porphyry-copper systems, and the Malanjkhand deposit has important implications for both metallogenic models for, and mineral exploration in, Precambrian terrains.     

Dinosaur coprolites from the Late Cretaceous (Maastrichtian) Lameta Formation of India: isotopic and other markers suggesting a C3plant diet

A single locality of the Late Cretaceous (Maastrichtian) Lameta Formation at Pisdura in Central India has yielded a large number of coprolites attributed to titanosaurian dinosaurs. Internally the coprolites are dark grey and contain abundant plant tissues and other organic materials. The plant tissues are mostly of gymnospermous origin. In addition, remains of bacterial colonies, fungal spores and algae are seen in the macerated fraction under scanning electron microscope. The dark grey appearance is probably attributable to fine-grained organic matter within voids in tracheids or xylem. The average ¹³C/¹²C ratio of the organic matter in the coprolites is -24‰ (relative to PDB) suggesting that plants of C₃type were the main diet of their producers. A comparison of δ¹⁵N value (about 4‰ w.r.t. air) of the coprolites with that of faecal matter of modern herbivores and carnivores suggests that gut fermentation may not have been an active mechanism in the digestion process of titanosaurs.