Nitrogen uptake,ammonium oxidation and nitrous oxide (N2O) levels in the coastal waters of western Cook Strait,New Zealand

Vertical measurements of $\text{NH}{}_4{}^{\mathrm{+}}$, $\text{NO}{}_3{}^{\mathrm{?}}$ and N₂O concentrations, $\text{NO}{}_3{}^{\mathrm{?}}$ and $\text{NH}{}_4{}^{\mathrm{+}}$ uptake, and $\text{NH}{}_4{}^{\mathrm{+}}$ oxidation rates were measured at 5 sites in western Cook Strait, New Zealand, between 31 March and 3 April 1983. Nitrate increased with depth at all stations reaching a maximum of 10.5 μg-atom $\text{NO}{}_3{}^{\mathrm{?}}\text{N l}{}^{\mathrm{?1}}$ at the most strongly stratified station whereas $\text{NH}{}_4{}^{\mathrm{+}}$ was relatively constant with depth at all stations (～0.1 μg-atom $\text{NH}{}_4{}^{\mathrm{+}}\text{N l}{}^{\mathrm{?1}}$). The highest rates of $\text{NH}{}_4{}^{\mathrm{+}}$ oxidation generally occurred in the near surface waters and decreased with depth. N₂O levels were near saturation with respect to the air above the sea surface and showed no obvious changes during 24 h incubation. $\text{NH}{}_4{}^{\mathrm{+}}$ oxidation by nitrifying bacteria may account for about 30% of the total $\text{NH}{}_4{}^{\mathrm{+}}$ utilization (i.e. bacterial+agal) and, assuming oxidation through to $\text{NO}{}_3{}^{\mathrm{?}}$, may supply about 40% of the algal requirements of $\text{NO}{}_3{}^{\mathrm{?}}$ in the study area. These results suggest that bacterial nitrification is of potential importance to the nitrogen dynamics of the western Cook Strait, particularly with respect to the nitrogen demands of the phytoplankton.     

The Early Pleistocene Praetiglian and Ludhamian pollen stages in the North Sea Basin and their relationship to the marine isotope record

In this paper, the currently accepted correlation of the Early Pleistocene Ludhamian stage of England with the Tiglian‐A sub‐stage of the Netherlands is challenged. Recent investigations of Early Pleistocene marine North Sea deposits from a borehole near Noordwijk (the Netherlands) yielded evidence from molluscs, dinoflagellate cysts and sporomorphs for an alternation of warm‐temperate and arctic intervals within the Praetiglian and Tiglian stages. Marine equivalents of the terrestrial‐based pollen sub‐stages Tiglian A and B have been recognised in the upper part of the sequence. A Praetiglian age can be assigned to the lower part of the sequence on the basis of mollusc analysis. Within the Praetiglian, an alternation of warm and cold phases has been recognised from both the dinoflagellate cyst and molluscan records. Three cold phases within the Praetiglian are tentatively correlated with marine isotope stages (MIS) 96–100. The molluscan assemblages provide evidence for climate forcing of the sea level: highest sea levels are reached in the warm‐temperate intervals. Within the Praetiglian, an interval with an acme zone of the dinoflagellate cyst Impagidinium multiplexum, is correlated with the Ludhamian and tentatively linked to MIS 97 and/or MIS 96. The cold molluscan assemblages from the Noordwijk borehole include an acme zone of Megayoldia thraciaeformis, the first and only occurrence of this North Pacific bivalve in the North Sea Basin. Copyright © 2006 John Wiley & Sons, Ltd.     

Design of stable drainage networks in upland forestry plantations

Erosion of man-made, forestry drainage channels occurs when the plough cuts through the surface peat layer into the underlying erodible mineral soil. A procedure is developed, based on hydraulic considerations, which will allow the drainage engineer to design stable drainage networks in upland forestry plantations. An example design chart is given for an erodible sandy loam type soil.     

Isobaric cooling and anti-clockwise P–T paths in the Variscan Odenwald Crystalline Complex, Germany

Mineral assemblages in Al₂O₃‐rich, SiO₂‐ and K₂O‐poor metapelitic rocks from the western Odenwald Crystalline Complex (Variscan Mid‐German Crystalline Rise, southern Germany) include corundum, spinel, cordierite, sillimanite, garnet and staurolite. Quartz is absent from almost all samples. Therefore, the applicability of conventional geothermobarometry is very limited or even impossible. Detailed petrographic investigation on selected samples permits inference of the sequence of appearance and disappearance of several mineral assemblages. The recognition of such partial re‐equilibration stages and their associated mineral assemblages, together with mineral stabilities predicted from KFMASH pseudosections, enables the determination of the pressure‐temperature (P–T) trajectories experienced by these rocks during the Variscan metamorphism. The rocks were metamorphosed under low‐P/high‐T conditions and underwent an anti‐clockwise P–T evolution. A pressure increase from about 2 kbar to 4 ± 0.5 kbar was accompanied by heating. Peak metamorphic conditions were reached at pressures of 4 ± 0.5 kbar and temperatures of at least 640 °C, probably even higher. The retrograde evolution is characterised by near‐isobaric cooling from ≥ 640 °C to approximately 550 °C. The rocks underwent the anti‐clockwise evolution in a subduction‐related magmatic arc setting. The close spatial association of the low‐P/high‐T rocks with recently discovered metabasic eclogites in the eastern part of the Odenwald Crystalline Complex may indicate a fossil paired metamorphic belt in the Central European Variscides.     

SANICLAY: simple anisotropic clay plasticity model

SANICLAY is a new simple anisotropic clay plasticity model that builds on a modification of an earlier model with an associated flow rule, in order to include simulations of softening response under undrained compression following K_o consolidation. Non‐associativity is introduced by adopting a yield surface different than the plastic potential surface. Besides, the isotropic hardening of the yield surface both surfaces evolve according to a combined distortional and rotational hardening rule, simulating the evolving anisotropy. Although built on the general premises of critical state soil mechanics, the model induces a critical state line in the void ratio–mean effective stress space, which is a function of anisotropy. To ease interpretation, the model formulation is presented firstly in the triaxial stress space and subsequently, its multiaxial generalization is developed systematically, in a form appropriate for implementation in numerical codes. The SANICLAY is shown to provide successful simulation of both undrained and drained rate‐independent behaviour of normally consolidated sensitive clays, and to a satisfactory degree of accuracy of overconsolidated clays. The new model requires merely three constants more than those of the modified Cam clay model, all of which are easily calibrated from well‐established laboratory tests following a meticulously presented procedure. Copyright © 2006 John Wiley & Sons, Ltd.     

Radon variations in a Hungarian village

 A steady radon exhalation is assumed in most publications. In a village of North-East Hungary, however, high radon concentrations have been measured, differing strongly in neighbouring houses and varying in time, due to the interplay of geochemical phenomena. Received: 20 November 1995 · Accepted: 18 June 1996     

Generating interface waves using a freely falling, instrumentedsource

In recent years, interface waves such as the Scholte wave have become important tools in the study of the geoacoustic properties of near-bottom seafloor sediments. Traditionally, these waves have been generated by explosive or pneumatic sources deployed at or near the seafloor and monitored by ocean-bottom seismographs or geophone arrays. While these sources generate the requisite interface waves, they also produce higher frequency compressional waves in the water and sediment that tend to contaminate the surface wave and make inversion of the data difficult in the near field. In this paper, a new source consisting of a freely falling projectile instrumented with an accelerometer is described. When the projectile impacts the bottom, the exact time history of the vertical force applied to the sediment is known and therefore may be convolved with the transfer function of a sediment geoacoustic model to produce accurate synthetic seismograms. Moreover, the vertical force applied to the seafloor is very efficient in generating surface wave motion while producing very little compressional wave energy so that the near-field signals are much more easily analyzed. An example of the use of the new source is presented including inversion of the received signals to obtain shear-wave velocity and attenuation as a function of depth in the near bottom sediments at a shallow-water site     

Reliability assessment of serviceability performance of braced retaining walls using a neural network approach

In urban environments, one major concern with deep excavations in soft clay is the potentially large ground deformations in and around the excavation. Excessive movements can damage adjacent buildings and utilities. There are many uncertainties associated with the calculation of the ultimate or serviceability performance of a braced excavation system. These include the variabilities of the loadings, geotechnical soil properties, and engineering and geometrical properties of the wall. A risk‐based approach to serviceability performance failure is necessary to incorporate systematically the uncertainties associated with the various design parameters. This paper demonstrates the use of an integrated neural network–reliability method to assess the risk of serviceability failure through the calculation of the reliability index. By first performing a series of parametric studies using the finite element method and then approximating the non‐linear limit state surface (the boundary separating the safe and ‘failure’ domains) through a neural network model, the reliability index can be determined with the aid of a spreadsheet. Two illustrative examples are presented to show how the serviceability performance for braced excavation problems can be assessed using the reliability index. Copyright © 2005 John Wiley & Sons, Ltd.