Three‐dimensional microstructure of samples recovered from asteroid 25143 Itokawa: Comparison with LL5 and LL6 chondrite particles

In this study, the three‐dimensional (3‐D) microstructure of 48 Itokawa regolith particles was examined by synchrotron microtomography at SPring‐8 during the preliminary examination of Hayabusa samples. Moreover, the 3‐D microstructure of particles collected from two LL6 chondrites (Ensisheim and Kilabo meteorites) and an LL5 chondrite (Tuxtuac meteorite) was investigated by the same method for comparison. The modal abundances of minerals, especially olivine, bulk density, porosity, and grain size are similar in all samples, including voids and cracks. These results show that the Itokawa particles, which are surface materials from the S‐type asteroid Itokawa, are consistent with the LL chondrite materials in terms of not only elemental and isotopic composition of the minerals but also 3‐D microstructure. However, we could not determine whether the Itokawa particles are purely LL5, LL6, or a mixture of the two. No difference between the particles collected from Rooms A and B of the sample chamber, corresponding to the sampling sequence of the spacecraft's second and first touchdowns, respectively, was detected because of the statistically small amount of particles from Room B.     

Crystallization temperature determination of Itokawa particles by plagioclase thermometry with X‐ray diffraction data obtained by a high‐resolution synchrotron Gandolfi camera

The crystallization temperatures of Itokawa surface particles recovered by the space probe Hayabusa were estimated by a plagioclase geothermometer using sodic plagioclase triclinicity. The Δ131‐index required for the thermometer, which is the difference in X‐ray diffraction peak positions between the 131 and 11 reflections of plagioclase, was obtained by a high‐resolution synchrotron Gandolfi camera developed for the third generation synchrotron radiation beamline, BL15XU at SPring‐8. Crystallization temperatures were successfully determined from the Δ131‐indices for four particles. The observed plagioclase crystallization temperatures were in a range from 655 to 660 °C. The temperatures indicate crystallization temperatures of plagioclases in the process of prograde metamorphism before the peak metamorphic stage.     

Energy determination of gamma-ray induced air showers observed by an extensive air shower array

ASTRI SST-2M is one of the prototypes of the small size class of telescopes proposed for the Cherenkov Telescope Array. Its optical design is based on a dual-mirror Schwarzschild-Couder configuration, and the camera is composed by a matrix of monolithic multipixel silicon photomultipliers managed by ad-hoc tailored front-end electronics. This paper describes the procedures for the gain calibration on the ASTRI SST-2M. Since the SiPM gain depends on the operative voltage and the temperature, we adjust the operative voltages for all sensors to have equal gains at a reference temperature. We then correct gain variations caused by temperature changes by adjusting the operating voltage of each sensor. For that purpose the SiPM gain dependence on operating voltage and on temperature have been measured. In addition, we present the calibration procedures and the results of the experimental measurements to evaluate, for each pixel, the parameters necessary to make the trigger uniform over the whole focal plane.     

HFT events: Shallow moonquakes?

A few large distant seismic events of distinctly high signal frequency, designated HFT (high-frequency teleseismic) events, are observed yearly by the Apollo lunar seismic network. Their sources are located on or near the surface of the moon, leaving a large gap in seismic activity between the zones of HFT sources and deep moonquakes. No strong regularities are found in either their spatial or temporal distributions. Several working hypotheses for the identity of these sources have been advanced, but many characteristics of the events seem to favor a hypothesis that they are shallow moonquakes. Simultaneous observations of other lunar phenomena may eventually enable the determination of their true identity.     

Volcanoes as possible indicators of tectonic stress orientation — Aleutians and Alaska

A new method for obtaining from volcanic surface features the orientations of the principal tectonic stresses is applied to Aleutian and Alaskan volcanoes. The underlying concept for this method is that flank eruptions for polygenetic volcanoes can be regarded as the result of a large-scale natural magmafracturing experiment. The method essentially relies on the recognition of the preferred orientation of radial and parallel dike swarms, primarily using the distribution of monogenetic craters including flank volcanoes. Since dikes tend to propagate in a direction normal to the minimum principal stress (T-axis), the method primarily yields the direction of the maximum horizontal compression (MHC) of regional origin. The direction of the MHC may correspond to either the maximum (P-axis) or intermediate (B-axis) principal stress.The direction of MHC obtained at 20 volcanoes in the Aleutian arc coincides well with the direction of convergence between the Pacific and North American plates. This result provides evidence that in the island arc the inferred direction of MHC is parallel to the maximum principal tectonic stress. In the back-arc region, general E-W trends of MHC are obtained from seven volcanic fields on islands on the Bering Sea shelf and the mainland coast of Alaska. These volcanic fields consist mostly of clusters of monogenetic volcanoes of alkali basalt. In the back-arc region, the trends of MHC may correspond to an E-W intermediate, a vertical maximum, and a N-S minimum principal stress.Implications for the tectonics of island arcs and back-arc regions are: (1) volcanic belts of some island arcs, including the Aleutian arc, are under compressional deviatoric stress in the direction of plate convergence. It is improbable that such arcs would split along the volcanic axis to form actively spreading marginal basins. (2) This compressional stress at the arc, probably generated by underthrusting, appears to be transmitted across the entire arc structure, but is apparently replaced within several hundred kilometers by a stress system characterized by horizontal extension (tensional deviatoric stress) in the back-arc region. (3) The volcanoes associated with these two stress systems differ in type (polygenetic vs. monogenetic) and in the chemistry of their magmas (andesitic vs. basaltic). These differences and the regional differences in orientation of the principal tectonic stresses suggest that the back-arc stress system has its own source at considerable depth beneath the crust.Lamont-Doherty Geological Observatory Contribution No. 2503.     

Rates of Thermal and Chemical Evolution of Magmas in a Cooling Magma Chamber: a Chronological and Theoretical Study on Basaltic and Andesitic Lavas from Rishiri Volcano, Japan

Rates of magmatic processes in a cooling magma chamber wereinvestigated for alkali basalt and trachytic andesite lavaserupted sequentially from Rishiri Volcano, northern Japan, bydating of these lavas using ²³⁸U–²³⁰Th radioactive disequilibriumand ¹⁴C dating methods, in combination with theoretical analyses.We obtained the eruption age of the basaltic lavas to be 29·3± 0·6 ka by ¹⁴C dating of charcoals. The eruptionage of the andesitic lavas was estimated to be 20·2 ±3·1 ka, utilizing a whole-rock isochron formed by U–Thfractionation as a result of degassing after lava emplacement.Because these two lavas represent a series of magmas producedby assimilation and fractional crystallization in the same magmachamber, the difference of the ages (i.e. 9 kyr) is a timescaleof magmatic evolution. The thermal and chemical evolution ofthe Rishiri magma chamber was modeled using mass and energybalance constraints, as well as quantitative information obtainedfrom petrological and geochemical observations on the lavas.Using the timescale of 9 kyr, the thickness of the magma chamberis estimated to have been about 1·7 km. The model calculationsshow that, in the early stage of the evolution, the magma cooledat a relatively high rate (>0·1°C/year), and thecooling rate decreased with time. Convective heat flux fromthe main magma body exceeded 2 W/m² when the magma was basaltic,and the intensity diminished exponentially with magmatic evolution.Volume flux of crustal materials to the magma chamber and rateof convective melt exchange (compositional convection) betweenthe main magma and mush melt also decreased with time, from 0·1 m/year to 10^–3 m/year, and from 1 m/yearto 10^–2 m/year, respectively, as the magmas evolved frombasaltic to andesitic compositions. Although the mechanism ofthe cooling (i.e. thermal convection and/or compositional convection)of the main magma could not be constrained uniquely by the model,it is suggested that compositional convection was not effectivein cooling the main magma, and the magma chamber is consideredto have been cooled by thermal convection, in addition to heatconduction. KEY WORDS: convection; magma chamber; heat and mass transport; timescale; U-series disequilibria     

Transform methods for frequency‐dependent complex stiffness to time domain using real or imaginary data only

The author has studied the transform method of complex stiffness, which is strongly dependent on frequency, to the time domain. In this paper, new transform methods that use only the real part or the imaginary part data are proposed. By applying them to example problems, it is confirmed that the accuracy of the proposed methods is almost high in both causal and noncausal cases. These methods can also be thought as a standby for the Hilbert transform, because the undefined part is easily calculated by the recovering complex function from the obtained impulse response. Copyright © 2007 John Wiley & Sons, Ltd.     

Mesospheric bore formation from large-scale gravity wave perturbations observed by collocated all-sky OH imager and sodium lidar

On 9 October 2007, long-horizontal-wavelength gravity waves were observed for the first time to steepen and form mesospheric bores at the altitude of ～87 km, by an all-sky OH imager located at Fort Collins (41°N, 105°W), Colorado. The collocated sodium lidar simultaneously observed the presence of a temperature inversion layer as the ducting region. One mesospheric bore uniquely later evolved into a large-amplitude soliton-like perturbation. When the gravity wave and the associated soliton-like perturbation passed through the lidar beams, the lidar detected strong vertical disturbance at 90 km, indicating convective instability. A large cold front system recorded several hours before in the troposphere was aligned to phase fronts of these large gravity waves. For all of the 7 mesospheric bores observed over a 5 year period, we found a similar alignment with a cold front 1000–1500 km away as the likely source of these large-scale gravity waves.     

Variability of gravity wave occurrence frequency and propagation direction in the upper mesosphere observed by the OH imager in Northern Colorado

Based on 5 years of OH imager data between September 2003 and September 2008 over Yucca Ridge Field Station, CO (40.7ºN, 104.9ºW), we presented the variation of gravity wave (GW) occurrence frequency and propagation direction in the upper mesosphere. In summer the GW occurrence frequency was extremely high at above 95% compared to other seasons (around 85%). The GW propagation direction showed a strong northward (poleward) preference in summer and a southward (equatorward) preference in winter. This could be possibly due to ducting of waves in the mesopause thermal structure and wave generation by the strong deep convection located at south side in summer and possible storms located at north side in winter. Westward traveling waves were rare, but eastward were frequent. In addition to seasonal variability, significant interannual variability was also observed.     

Suppression of Matrix Effects in ICP-MS by High Power Operation of ICP: Application to Precise Determination of Rb, Sr, Y, Cs, Ba, REE, Pb, Th and U at ng g-1 Levels in Milligram Silicate Samples

We found that the suppression of signals for ⁸⁸Sr, ¹⁴⁰Ce and ²³⁸U in rock solution caused by rock matrix in ICP-MS (matrix effects) was reduced at high power operation (1.7 kW) of the ICP. To make the signal suppression by the matrix negligible, minimum dilution factors (DF) of the rock solution for Sr, Ce and U were 600, 400 and 113 at 1.1, 1.4 and 1.7 kW, respectively. Based on these findings, a rapid and precise determination method for Rb, Sr, Y, Cs, Ba, REE, Pb, Th and U using FI (flow injection)-ICP-MS was developed. The amount of the sample solution required for FI-ICP-MS was 0.2 ml, so that 1.8 mg sample was sufficient for analysis with a detection limit of several ng g^-1. Using this method, we determined the trace element concentrations in the USGS rock reference materials, DTS-1, PCC-1, BCR-1 and AGV-1, and the GSJ rock reference materials, JP-1, JB-1, -2, -3, JA-1, -2 and -3. The reproducibilities (RSD %) in replicate analyses (n=5) of BCR-1, AGV-1, JB-1, -2, -3, JA-1, -2, and -3 were < 6 %, and typically 2.5%. The difference between the average concentrations of this study for BCR-1 and those of the reference values were < 2%. Therefore, it was concluded that the method can give reliable data for trace elements in silicate rocks.