Rare earth element concentrations in a suite of basanitoids and alkali olivine basalts from Grenada,Lesser Antilles

A suite of basanitoids and alkali olivine basalts from Grenada, Lesser Antilles were analyzed for rare earth elements. The REE concentrations of these rocks are characterized by a small variation in the heavy REE (7 to 9 times chondrite) and a large variation in the light REE (17 to 93 times chondrite). Among the possible mechanisms to account for the REE variations, fractional crystallization processes at low and high pressures, and partial melting processes (both batch melting and fractional melting) were examined, using the partition relationships of REE among silicate minerals and melts. It is suggested that the observed REE variations are best explained by variable degrees of batch partial melting, in which garnet is present as one of the solid phases through 2 to 17% melting of a garnet lherzolite parent rock.     

Overview of the MITI Nankai Trough Wells: A Milestone in the Evaluation of Methane Hydrate Resources

Abstract. Bottom-simulating reflectors suggestive of the presence of methane hydrates are widely distributed below the ocean floor around Japan. In late 1999, drilling of the MITI Nankai Trough wells was conducted to explore this potential methane hydrate resource and a Tertiary conventional structure. The wells are located in the Northwest Pacific Ocean off Central Japan at a water depth of 945 m. A total of six wells were drilled, including the main well, two pilot wells, and three post survey wells at intervals of 10–100 m. All wells except the first confirmed the occurrence of hydrates based on logging-while-drilling, wire-line logging and/or coring using a pressure and temperature coring system in addition to conventional methods. Based on the various well profiles, four methane hydrate-bearing sand-rich intervals in turbidite fan deposits were recognized. Methane hydrates fill the pore spaces in these deposits, reaching saturation of up to 80 % in some layers. The methane hydrate-bearing turbiditic sand layers are less than 1 m thick, with a total thickness of 12–14 m. The bottom depth of high hydrate concentration correlates well with the depth of the bottom-simulating reflector. Based on these exploration results, the Japanese government inaugurated a 16-year methane hydrate exploitation program in 2001.     

Sulfur Isotope Geochemistry of the Supergiant Xikuangshan Sb Deposit, Central Hunan, China: Constraints on Sources of Ore Constituents

Abstract. The supergiant Xikuangshan Sb deposit is located in the Middle to Upper Devonian limestone of central Hunan, China. Primary ores are composed of early-stage stibnite and calcite with rare pyrite, early main-stage stibnite and quartz, and late main-stage stibnite and calcite. New sulfur isotope data reveal the clustering of δ³⁴S values (+5 ∼ +8 %) for both early and late main-stage stibnite; a single early-stage stibnite exhibits δ³⁴S value (+7.5 %) identical to its main ore-stage counterparts and the coexisting calcite has almost unmodified carbon isotope composition (-4.4 %). The data suggest a probable common source of sulfur for stibnite that was deposited at different paragenetic stages. A much wider variation in δ³⁴S values for early main-stage stibnite (+3.5 to +16.3 %, av. +7.5 %) compared to that for late main-stage stibnite (+5.3 to +8.1 %, av. +6.2 %) can be interpreted to be due to local interaction of earlier ore fluid with Devonian host rocks. The previous studies show that the Precambrian basement contains elevated Sb concentrations, and two distinctive sulfur reservoirs with δ³⁴S_pyrite values at ca. +11 ∼ +24 % and -7.0 ∼-11 %. The homogenizing effect for sulfur hydrothermally leached from the two reservoirs might have provided ore constituents for the Xikuangshan fluids.     

The effective failure modes and stability of slopes in rock mass with two discontinuity sets

Summary The stability of rock slopes in discontinuous rock mass associated with the construction of power plants, highways and open pits is always of paramount importance during the lifetime of these structures. The likely forms of instabilities observed in the excavation of rock slopes and some mathematical methods for the stability analyses are well documented in literature. Since most of the mathematical approaches used are based on the limiting-equilibrium concept, there seems a need to check the validity of these approaches under some controlled conditions. In this paper, the authors describe methods for the stability of a blocky column and discontinuous rock slopes derived on the basis of dynamic equilibrium equations and compare the results calculated according to the developed method with those of experiments on model blocky columns and model slopes in the laboratory. Test results confirm that the limiting equilibrium approache is valid and an effective way of dealing with the stability problems in discontinuous rock mass as long as the likely forms of instability are properly treated in these approaches.     

Diffusivity of oxygen in jadeite and diopside melts at high pressures

The diffusivity of oxygen was determined in melts of Jadeite (NaAlSi₂O₆) and diopside (CaMgSi₂O₆) compositions using diffusion couples with ¹⁸O as a tracer. In the Jadeite melt, the diffusivity of oxygen increases from $\text{6.87}{}_{\mathrm{?0.25}}{}^{\mathrm{+0.28}}\text{× 10}{}^{\mathrm{?10}}\text{cm}{}^2\text{/}\text{sec}$ at 5 Kb to $\text{1.32 ± 0.08 × 10}{}^{\mathrm{?9}}\text{cm}{}^2\text{/}\text{sec}$ at 20 Kb at constant temperature (1400°C), whereas in the diopside melt at 1650°C, the diffusivity decreases from $\text{7.30}{}_{\mathrm{?0.18}}{}^{0.29}\text{× 10}{}^{\mathrm{?7}}\text{cm}{}^2\text{/}\text{sec}$ at 10 Kb to $\text{5.28}{}_{\mathrm{?0.55}}{}^{\mathrm{+0.60}}\text{× 10}{}^{\mathrm{?7}}\text{cm}{}^2\text{/}\text{sec}$ at 17 Kb. These results demonstrate that the diffusivity is inversely correlated with the viscosity of the melt. For the jadeite melt, in particular, the inverse correlation is very well approximated by the Eyring equation using the diameter of oxygen ions as a unit distance of translation, suggesting that the viscous flow is rate-limited by the diffusion of individual oxygen ions. In the diopside melt, the activation volume is slightly greater than the molar volume of oxygen ion, indicating that the individual oxygen ion is the diffusion unit. The negative activation volume obtained for the jadeite melt is interpreted as the volume decrease associated with a diffusive jump of an oxygen ion due to local collapse of the network structure.     

Carbon suboxide and the genetic code

Carbon suboxide (C₃O₂) polymers formed in the primitive atmosphere would have produced an organic compound soup of high concentration on the Earth. Various vestiges of C₃O₂ are found in the present genetic scheme, which might suggest that the living system had formed from the polymer soup.     

Determination of zircon/melt trace element partition coefficients from SIMS analysis of melt inclusions in zircon

Partition coefficients (^zircon/meltD_M) for rare earth elements (REE) (La, Ce, Nd, Sm, Dy, Er and Yb) and other trace elements (Ba, Rb, B, Sr, Ti, Y and Nb) between zircon and melt have been calculated from secondary ion mass spectrometric (SIMS) analyses of zircon/melt inclusion pairs. The melt inclusion-mineral (MIM) technique shows that D_REE increase in compatibility with increasing atomic number, similar to results of previous studies. However, D_REE determined using the MIM technique are, in general, lower than previously reported values. Calculated D_REE indicate that light REE with atomic numbers less than Sm are incompatible in zircon and become more incompatible with decreasing atomic number. This behavior is in contrast to most previously published results which indicate D > 1 and define a flat partitioning pattern for elements from La through Sm. The partition coefficients for the heavy REE determined using the MIM technique are lower than previously published results by factors of ≈15 to 20 but follow a similar trend. These differences are thought to reflect the effects of mineral and/or glass contaminants in samples from earlier studies which employed bulk analysis techniques.D_REE determined using the MIM technique agree well with values predicted using the equations of Brice (1975), which are based on the size and elasticity of crystallographic sites. The presence of Ce⁴⁺ in the melt results in elevated D_Ce compared to neighboring REE due to the similar valence and size of Ce⁴⁺ and Zr⁴⁺. Predicted ^zircon/meltD values for Ce⁴⁺ and Ce³⁺ indicate that the Ce⁴⁺/Ce³⁺ ratios of the melt ranged from about 10⁻³ to 10⁻². Partition coefficients for other trace elements determined in this study increase in compatibility in the order Ba < Rb < B < Sr < Ti < Y < Nb, with Ba, Rb, B and Sr showing incompatible behavior (D_M < 1.0), and Ti, Y and Nb showing compatible behavior (D_M > 1.0).The effect of partition coefficients on melt evolution during petrogenetic modeling was examined using partition coefficients determined in this study and compared to trends obtained using published partition coefficients. The lower D_REE determined in this study result in smaller REE bulk distribution coefficients, for a given mineral assemblage, compared to those calculated using previously reported values. As an example, fractional crystallization of an assemblage composed of 35% hornblende, 64.5% plagioclase and 0.5% zircon produces a melt that becomes increasingly more enriched in Yb using the D_Yb from this study. Using D_Yb from Fujimaki (1986) results in a melt that becomes progressively depleted in Yb during crystallization.     

Late Pleistocene crustal uplift and gravity anomaly in the eastern part of Kyushu, Japan, and its geophysical implications

The Miyazaki Plain, eastern part of Kyushu, Japan, is characterized by both significant negative gravity anomalies and aseismic crustal uplifting (1 mm/year) in the Late Pleistocene and Holocene. We examine the relationship between these two phenomena, which may provide important constraints on the interaction between the collision and/or subduction of the Kyushu-Palau Ridge and the forearc. We estimate the mass deficiency below 11-km depth by using the gravity anomalies and P-wave velocity structure of the upper crust. The onset of the load accumulation, 0.5–0.4 Ma, is inferred from the movement of the fluvial terraces considering the tephrochronology. The loading history is assumed to be a linear function of time. We evaluate the crustal rebound by assuming a viscoelastic plate deformation with an underplating load existing at 20- or 30-km depth. The predicted crustal movement for models with a lithospheric (crustal) viscosity of 10²³–10²⁴ Pa s can explain the observed altitudes of the shoreline of the marine terraces formed at the Last Interglacial of about 125 kyr BP and the middle Holocene of 5–6 kyr BP. Although we cannot restrict the origin of the buoyant body, the subduction of the Kyushu-Palau Ridge, remnant arc associated with back-arc opening of the Shikoku Basin, may be related to the buoyancy for the uplifting region examined here. On the other hand, the buoyant body off the Miyazaki Plain probably plays an important role in the interaction between the subducting oceanic slab and the overriding forearc crust. Thus, the observed lateral variation of the interplate coupling on the convergent boundary along the Nankai Trough may be attributed to the existence of the buoyant body.     

Polarization Calibration of the <Emphasis Type="Italic">Chromospheric Lyman-Alpha SpectroPolarimeter</Emphasis> for a 0.1% Polarization Sensitivity in the VUV Range. Part II: In-Flight Calibration

The Chromospheric Lyman-Alpha SpectroPolarimeter is a sounding rocket instrument designed to measure for the first time the linear polarization of the hydrogen Lyman-\({\upalpha }\) line (121.6 nm). The instrument was successfully launched on 3 September 2015 and observations were conducted at the solar disc center and close to the limb during the five-minutes flight. In this article, the disc center observations are used to provide an in-flight calibration of the instrument spurious polarization. The derived in-flight spurious polarization is consistent with the spurious polarization levels determined during the pre-flight calibration and a statistical analysis of the polarization fluctuations from solar origin is conducted to ensure a 0.014% precision on the spurious polarization. The combination of the pre-flight and the in-flight polarization calibrations provides a complete picture of the instrument response matrix, and a proper error transfer method is used to confirm the achieved polarization accuracy. As a result, the unprecedented 0.1% polarization accuracy of the instrument in the vacuum ultraviolet is ensured by the polarization calibration.     

Variations in trace elements,isotopes, and organic geochemistry during the Hangenberg Crisis,Devonian–Carboniferous transition,northeastern Vietnam

The Hangenberg Crisis at the Devonian–Carboniferous boundary is known as a polyphase extinction event that affected more than 45 % of marine and terrestrial genera. As the cause of this event is still debated, analyses were carried out on sedimentary samples from the Devonian–Carboniferous Pho Han Formation in northeastern Vietnam to reconstruct the paleoenvironment around the time of this event using stable carbon isotopes; total sulfur; manganese; vanadium; molybdenum; and sedimentary organic matter, such as dibenzothiophenes, cadalene, and regular steranes. These geochemical signatures provide a high‐resolution redox history for this section and show that transgression‐driven high primary productivity, possibly enhanced by terrestrial input, caused severe oxygen depletion along the continental margin of the South China block during the Hangenberg Crisis.