Lode–gold mineralization in the Tanami region, northern Australia

The Tanami region of northern Australia has emerged over the last two decades as the largest gold-producing region in the Northern Territory. Gold is hosted by epigenetic quartz veins in sedimentary and mafic rocks, and by sulfide-rich replacement zones within iron formation. Although limited, geochronological data suggest that most mineralization occurred at about 1,805–1,790 Ma, during a period of extensive granite intrusion, although structural relationships suggest that some deposits predate this period. There are three main goldfields in the Tanami region: the Dead Bullock Soak goldfield, which hosts the world-class Callie deposit; The Granites goldfield; and the Tanami goldfield. In the Dead Bullock Soak goldfield, deposits are hosted by carbonaceous siltstone and iron formation where a late (D₅) structural corridor intersects an early F₁ anticlinorium. In The Granites goldfield, deposits are hosted by highly sheared iron formation and are interpreted to predate D₅. The Tanami goldfield consists of a large number of small, mostly basalt-hosted deposits that probably formed at a high structural level during D₅. The D₅ structures that host most deposits formed in a convergent structural regime with σ ₁ oriented between E–W and ENE–WSW. Structures active during D₅ include NE-trending oblique thrust (dextral) faults and ESE-trending (sinistral) faults that curve into N- to NNW-trending reverse faults localized in supracrustal belts between and around granite complexes. Granite intrusions also locally perturbed the stress field, possibly localizing structures and deposits. Forward modeling and preliminary interpretations of reflection seismic data indicate that all faults extend into the mid-crust. In areas characterized by the N- to NW-trending faults, orebodies also tend to be N- to NW-trending, localized in dilational jogs or in fractured, competent rock units. In areas characterized by ESE-trending faults, the orebodies and veins tend to strike broadly east at an angle consistent with tensional fractures opened during E–W- to ENE–WSW-directed transpression. Many of these deposits are hosted by reactive rock units such as carbonaceous siltstone and iron formation. Ore deposition occurred at depths ranging from 1.5 to 11 km from generally low to moderate salinity carbonic fluids with temperatures from 200 to 430°C, similar to lode–gold fluids elsewhere in the world. These fluids are interpreted as the product of metamorphic dewatering caused by enhanced heat flow, although it is also possible that the fluids were derived from coeval granites. Lead isotope data suggest that lead in the ore fluids had multiple sources. Hydrogen and oxygen isotope data are consistent with both metamorphic and magmatic origins for ore fluids. Gold deposition is interpreted to be caused by fluid unmixing and sulfidation of host rocks. Fluid unmixing is caused by three different processes: (1) CO₂ unmixing caused by interaction of ore fluids with carbonaceous siltstone; (2) depressurization caused by pressure cycling in shear zones; and (3) boiling as ore fluids move to shallow levels. Deposits in the Tanami region may illustrate the continuum model of lode–gold deposition suggested by Groves (Mineralium Deposita 28:366–374, 1993) for Archean districts.     

Neighbourhoods and health: A review of the New Zealand literature

Over the past two decades, there has been a resurgence of interest into place‐based influences on health. Researchers have identified that various characteristics of neighbourhoods exert an influence on the health outcomes and behaviours of local residents. Understanding the processes linking places to health provides considerable potential for a range of policy interventions. We review the New Zealand‐based neighbourhoods and health research. Consideration is given to the types of neighbourhood characteristics, as well the range of health outcomes that have been studied. Finally, we suggest some priorities for further research into the mechanisms underpinning neighbourhood influences on health in New Zealand.     

Experimental and computational synergy for modelling an advanced gas-cooled reactor core under seismic excitation

The advanced gas-cooled reactors (AGRs) are the backbone of the United Kingdom's nuclear generation fleet, producing approximately 17% of the country's electricity. Their safety cases are supported by thorough inspection and monitoring of their graphite cores and extensive theoretical, analytical, and experimental studies. This paper presents a unique, highly innovative and technically challenging earthquake engineering project that has provided vital evidence to underpin the seismic safety assessments of the AGRs. Two modelling approaches, one experimental (a multilayer array physical model), and one numerical (a SOLFEC nonsmooth contact dynamics computational model) have been developed to investigate the seismic behaviour of an aged graphite core. The synergetic relationship between the two approaches is a product of insightful collaborative learning between the University of Bristol and Atkins, with the experiments providing material parameters and validation data and the computer simulations feeding array design and test schedule recommendations to the physical model. The predictive capabilities of the physical and the numerical models are tested by direct comparison and the good agreement between the results has increased the confidence in both. The model's versatility allows a variety of core scenarios to be tested that can explore in detail the AGR core behaviour in seismic conditions.     

Bioturbation and erosion rates along the soil-hillslope conveyor belt,part 2: Quantification using an analytical solution of the diffusion–advection equation

Particles on soil-mantled hillslopes are subject to downslope transport by erosion processes and vertical mixing by bioturbation. Both are key processes for understanding landscape evolution and soil formation, and affect the functioning of the critical zone. We show here how the depth–age information, derived from feldspar-based single grain post-infrared infrared stimulated luminescence (pIRIR), can be used to simultaneously quantify erosion and bioturbation processes along a hillslope. In this study, we propose, for the first time, an analytical solution for the diffusion–advection equation to calculate the diffusivity constant and erosion–deposition rates. We have fitted this model to age–depth data derived from 15 soil samples from four soil profiles along a catena located under natural grassland in the Santa Clotilde Critical Zone Observatory, in the south of Spain. A global sensitivity analysis was used to assess the relative importance of each model parameter in the output. Finally, the posterior probability density functions were calculated to evaluate the uncertainty in the model parameter estimates. The results show that the diffusivity constant at the surface varies from 11.4 to 81.9 mm² a^-1 for the hilltop and hill-base profile, respectively, and between 7.4 and 64.8 mm² a^-1 at 50 cm depth. The uncertainty in the estimation of the erosion–deposition rates was found to be too high to make a reliable estimate, probably because erosion–deposition processes are much slower than bioturbation processes in this environment. This is confirmed by a global sensitivity analysis that shows how the most important parameters controlling the age–depth structure in this environment are the diffusivity constant and regolith depth. Finally, we have found a good agreement between the soil reworking rates proposed by earlier studies, considering only particle age and depth, and the estimated diffusivity constants. The soil reworking rates are effective rates, corrected for the proportion of particles actually participating in the process. © 2019 John Wiley & Sons, Ltd.     

Wondering about …. Geography—Its nature and its relevance?

In the context of the current review of New Zealand's National Certificate of Educational Achievement (NCEA), the paper reflects on the nature and relevance of geography in education, life and work. The context of school geography programmes is critically examined, and a checklist of points for further consideration and action is presented.     

Climate change and community resilience in Samoa

Being resilient in the face of climate change seems especially important for island societies, which face the effects of rising temperatures, unpredictable rainfall, changing wind patterns and sea level rise. To date, most studies of adaptation and resilience among Pacific island communities have used indicators and methods rooted in Western science and neo-classical economics. These have been criticized as being locally irrelevant and inadequate to appreciate the dynamic nature and social structures of island communities and their capacity to adapt. This paper challenges the paradigm that defines resilience as a return to equilibrium, by using a non-equilibrium, cultural ecological lens. The non-equilibrium view of resilience sees the social systems of island nations as highly dynamic and undergoing persistent adaptation in the face of changing environmental factors. Field-based research undertaken in eight villages in Samoa found that, through constant exposure to environmental change over extended periods of time, communities have become resilient and are in a position to adapt to future changes. In developing future policy in relation to climate change, Pacific island governments need to develop a more nuanced understanding of islanders’ perceptions and historical actions in the context of both their physical locations and their dynamic socio-cultural systems.     

The ruby mines of Mogok

The world's finest rubies all come from the metamorphic rocks of Mogok, in Myanmar. Traditional methods of mining, with little mechanization, are still used; they work best in digging the gemstones out of narrow calcite veins and thin beds of buried placer gravel.     

The role of macrophytes as a refuge and food source for the estuarine isopod Exosphaeroma hylocoetes ( )

The role of submerged macrophytes as refugia from fish predation and as possible food sources for the estuarine isopod Exosphaeroma hylocoetes ( Barnard, K.H., 1940) was investigated. Laboratory experiments tested the effectiveness of artificial vegetation, replicating submerged vegetation, in enabling isopods to elude selected fish predators Rhabdosargus holubi, Glossogobius callidus, Monodactylus falciformis and Clinus cottoides. Isopods preferentially hid in the vegetation (>90%), even in absence of fish. The predatory fish had varying success in finding isopods within the vegetation. Isopod mortality ranged from 2% (R. holubi) to a maximum of 87% (C. cottoides) within vegetation, depending on the fish predator present. Stable isotope and fatty acid analyses ruled out the submerged macrophyte Ruppia maritima and inundated fringing grasses as direct food sources, but highlighted the epiphytic biota (mainly diatoms) found on the submerged vegetation and sediments as more likely food sources. These findings are consistent with gut content analyses. The results suggest that the close association of E. hylocoetes with R. maritima is the result of the vegetation providing the isopod with a refuge against fish predation as well as areas of increased food availability.     

In-situ estimates of net sediment flux per swash: Reply to discussion by TE Baldock of “Measurement of wave-by-wave bed-levels in the swash zone”

This paper replies to TE Baldock's discussion [Coastal Eng. 56 (2009) 380–381] of ‘Measurement of wave-by-wave bed-levels in the swash zone’ by Turner et al. [Coastal Eng. 55 (2008) 1237–1242]. We address and extend the comparison and discussion of ultrasonic bed-level sensors and buried pressure transducers to obtain estimates of the beach face elevation within the swash zone. We demonstrate the use of the former method to obtain many and continuous (every time the beach face is exposed) in-situ estimates of net sediment flux per swash.