A new climatology of the Okhotsk Sea derived from the FERHRI database

This paper introduces a new hydrographic climatology of the Okhotsk Sea; this climatology was constructed from the Far Eastern Regional Hydrometeorological Research Institute (FERHRI) database. The FERHRI database has a volume of data three to five times larger than the data used in previous studies because unpublished Russian observation data have been included in the FERHRI database. After removing erroneous data from the database by pertinent quality control methods, the climatology for 1/4°?×?1/4° grids is produced by applying objective analysis procedures. Features similar to those in previous studies are seen in the intermediate layers in the Okhotsk Sea, whereas our climatology provides values that fill in gaps in previous climatologies. It is obvious from the monthly climatologies that temperature and salinity distributions evolve in accordance with seasonal variations in the Eastern Sakhalin Current and inflow from the North Pacific. We also reconstructed climatologies for the winter mixed layer and dense shelf water from data obtained from the temperature minimum waters identified as the remnants of these two layers. Free access to the 1°?×?1° versions of all climatologies constructed in this study is available through the website.     

Seismic capacity of retrofitted beam–column connections in high‐rise steel frames when subjected to long‐period ground motions

The seismic capacity of beam‐to‐column connections in steel high‐rise frames is a matter of concern, particularly when they are subjected to long‐period ground motions. A previous full‐scale shaking table test conducted at the E‐Defense National Research Institute for Earth Science and Disaster Prevention in Japan disclosed cracks and fractures in such beam‐to‐column connections. This paper examines the effects of three types of beam‐to‐column connection retrofit: supplemental welds, wing plates, and a haunch. Quasi‐static member tests and a series of shaking table tests applied to a full‐scale specimen are conducted to quantify the respective performances of the retrofit schemes. The performance of a total of 28 connections tested by the member and shaking table tests is evaluated together with that of an additional 12 unretrofitted connections tested in the previous test. When the supplemental welds are applied only to the shear tab to the web, the connection fractures at the same instant as the connection without retrofit. The corresponding cumulative plastic rotation is not improved. When the supplement welds are further applied to the web‐to‐column connection, strain concentration at the bottom flange, primarily promoted by the presence of the RC floor slab, is significantly reduced, and the cumulative plastic rotation capacity is increased to eight times that of the connection without retrofit. For the wing plate connection and haunch connection, the critical section is moved from the beam end to the beam cross‐section corresponding to the tip of the wing plates or haunch, resulting in an improvement of ductility by eight times that of the unretrofitted connection. Copyright © 2011 John Wiley & Sons, Ltd.     

Characteristics of outer shelf water in the East China Sea

Water mass properties along cross-sections of the Kuroshio in the East China Sea (ECS) are investigated in detail. We used temperature, salinity and dissolved oxygen data from 2000 and 2002, together with historical temperature and salinity data from 1987 to 2004. Water properties were divided into two groups: high and low salinities or oxygen at temperatures warmer than 15 and 12 °C, respectively. We found the existence of outer shelf water W2, as defined by clear modes in frequency distributions of salinity and oxygen within various temperature segments. The outer shelf water was different from both Kuroshio Tropical Water (KTW) and coastal water. We mapped horizontal and vertical distributions of W2, along with W1 and KTW. The outer shelf water was distributed with density σ _t = 22.5–25.5 over a relatively broad area, from the outer continental shelf to the continental slope, particularly in autumn. Vertical distribution of the water suggests that W2 spread from the outer shelf to just the shelf side of the Kuroshio Current velocity maximum. Seasonal variations are examined with historical data along PN section over 17 years, and suggest that the appearance of W2 is distinct in summer and autumn. By comparing temperature–salinity (T–S) diagrams from Taiwan Strait and east of Taiwan, the outer shelf water (W2) originates from South China Sea Tropical Water (SCSTW), as suggested by Chen, J Geophys Res 110:C05012 (2005). The present study of the ECS clearly shows that SCSTW is transported along the east coast of Taiwan or through the Taiwan Strait into the ECS. It then spreads over a relatively wide area from the outer shelf to just the shelf side of the Kuroshio axis, and there is some horizontal mixing between SCSTW and KTW around the shelf break.     

Wave set-up in the storm surge along open coasts during Typhoon Anita

Wave set-up in storm surges is studied using a numerical model for coasts in Tosa Bay, Japan, open to the Pacific Ocean. Simulation models employing only atmospheric pressures and winds as external forces are unable to properly simulate open coast storm surge heights, such as those due to Typhoon Anita (1970). However, the present study shows that a numerical model incorporating wave-induced radiation stresses, as well as wind stresses and pressure gradients, is able to account for the open coast surge heights. There is a maximum contribution of 40% by the radiation stresses to the peak sea level rises. This study also evaluates the effects of the tides; including the tides improves the agreement between the predicted water surface elevations and the observations. The difference in predictions between one-way coupling from wave to surge models and two-way coupling of the surge and wave models is found to be small.     

P - V - T equation of state of stishovite to the mantle transition zone conditions

In-situ synchrotron X-ray diffraction experiments were conducted using the SPEED-1500 multi-anvil press of SPring-8 on stishovite SiO₂ and pressure-volume-temperature data were collected at up to 22.5 GPa and 1,073 K, which corresponds to the pressure conditions of the base of the mantle transition zone. The analysis of room-temperature data yielded V₀=46.56(1) ų, K_{T 0}=296(5) GPa and K _T =4.2(4), and these properties were consistent with the subsequent thermal equation of state (EOS) analyses. A fit of the present data to high-temperature Birch-Murnaghan EOS yielded (K_T /T) _P =–0.046(5) GPa K^–1 and = a + bT with values of a =1.26(11)×10^–5 K^–1 and b =1.29(17)×10^–8 K^–2. A fit to the thermal pressure EOS gives ₀=1.62(9)×10^–5 K^–1, ( K _T / T) _V =–0.027(4) GPa K^–1 and (²P /T ²) _V =27(5)×10^–7 GPa K^–2. The lattice dynamical approach by Mie-Grüneisen-Debye EOS yielded ₀=1.33(6), q =6.1(8) and ₀=1160(120) K. The strong volume dependence of the thermal pressure of stishovite was revealed by the analysis of present data, which was not detectable by the previous high-temperature data at lower pressures, and this yields ( K _T / T) _V 0 and q 1. The analyses for the fictive volume for a and c axes show that relative stiffness of c axis to a axis is similar both on compression and thermal expansion. Present EOS enables the accurate estimate of density of SiO₂ in the deep mantle conditions.     

Twin formation in hematite during dehydration of goethite

Twin formation in hematite during dehydration was investigated using X-ray diffraction, electron diffraction, and high-resolution transmission electron microscopy (TEM). When synthetic goethite was heated at different temperatures between 100 and 800 °C, a phase transformation occurred at temperatures above 250 °C. The electron diffraction patterns showed that the single-crystalline goethite with a growth direction of [001]_G was transformed into hematite with a growth direction of [100]_H. Two non-equivalent structures emerged in hematite after dehydration, with twin boundaries at the interface between the two variants. As the temperature was increased, crystal growth occurred. At 800 °C, the majority of the twin boundaries disappeared; however, some hematite particles remained in the twinned variant. The electron diffraction patterns and high-resolution TEM observations indicated that the twin boundaries consisted of crystallographically equivalent prismatic (100) (010), and (1\(\bar{1}\)0) planes. According to the total energy calculations based on spin-polarized density functional theory, the twin boundary of prismatic (100) screw had small interfacial energy (0.24 J/m²). Owing to this low interfacial energy, the prismatic (100) screw interface remained after higher-temperature treatment at 800 °C.     

Multi‐scale Decomposition of Co‐seismic Deformation from High Resolution DEMs: a Case Study of the 2004 Mid‐Niigata Earthquake

Decomposing co-seismic deformation is an immediate need for researchers who are interested in earthquake inversion analysis and geo-hazard mapping. However, conventional InSAR or digital elevation models (DEMs) imagery analyses only provide the displacement in the Line-of-Sight (LOS) direction or elevation changes. The 2004 Mid-Niigata earthquake in Japan provides lessons on how to decompose co-seismic deformation from two sets of DEMs. If three adjacent points undergo a rigid-body-translation movement, their co-seismic deformation can be decomposed by solving simultaneous equations. Although this method has been successfully used to discuss tectonic deformations, the algorithm needed improvement and a more rigorous algorithm, including a new definition of nominal plane, DEMs comparability improvement and matrix condition check is provided. Even with these procedures, the obtained decomposed displacement often showed remarkable scatter prompting the use of the moving average method, which was used to determine both tectonic and localized displacement characteristics. A cut-off window and a pair of band-pass windows were selected according to the regional geology and construction activities to ease the tectonic and localized displacement calculations, respectively. The displacement field of the tectonic scale shows two major clusters of large lateral components, and coincidently major visible landslides were found mostly within them. The localized displacement helps to reveal hidden landslides in the target area. As far as the Kizawa hamlet is concerned, the obtained vectors show down-slope movements, which are consistent with the observed traces of dislocations that were found in the Kizawa tunnel and irrigation wells. The method proposed has great potential to be applied to understanding post-earthquake rehabilitation in other areas.     

Generation of tidal bedding in a circular flume experiment: formation process and preservation potential of mud drapes

Flume experiments aimed to produce flaser bedding were conducted using fine sand and clay in a circular flume. The formation process of mud drapes during the slack-water stage was revealed in detail. When the tidal current declines, a uniform mobile mud layer initially settles from suspension and drapes the entire rippled sand bed (type A mud). When the remaining flow velocity is very low, a more fluid mud begins to settle out (type B mud) that preferentially fills the ripple troughs, the ripples and mud together forming a flat surface. At slack tide, the two-phase mud drape is temporarily stationary. After the onset of the reversed flow phase, most of the type B mud is resuspended, while the type A mud is eroded from the crests, leaving behind a remnant mud drape (flaser) in the troughs that is subsequently buried by migrating ripples. Type B mud generally contains variable amounts of sand derived from eroded ripple crests, but does not show any visible internal sedimentary structures. Type A mud represents the ‘mud drapes’ commonly described in the literature, the temporary existence of type B mud having gone unnoticed because of its low preservation potential. When present, it can be recognized by its sand content and the occurrence of flame structures in ripple troughs. Tidal deposits reflecting the existence and depositional characteristics of both type A and type B mud are found in, for example, the macrotidal Oligocene Ashiya Group, Japan.