Wind-Tunnel and Numerical Simulations of the Coastal Thermal Internal Boundary Layer

Wind-tunnel experiments in a thermally stratified wind tunnel and direct numerical simulations were performed to simulate the thermal internal boundary layer (TIBL) that developed over a coastal area in a sea-breeze flow. The results of the simulations were analyzed to investigate turbulence structure in the TIBL. To study the effects of the atmospheric stability over the sea on the TIBL, two vertical profiles of temperature were created in the upstream portion of the wind-tunnel experiment and the direct numerical simulation. Turbulence statistics of the TIBL changed significantly according to the temperature profile over the sea, indicating that the stability of the flow over the sea has a significant effect on the structure and turbulence characteristics of the TIBL. Furthermore, the TIBL heights were estimated from the vertical profiles of the local Richardson number. The estimated TIBL heights agreed with those predicted by a pre-existing relation, suggesting that both the wind-tunnel experiment and the direct numerical simulation accurately reproduced the growth of the TIBL.     

A laboratory study of formative conditions for characteristic ripple patterns associated with a change in wave conditions

A wave‐?ume experiment was conducted to examine the formative condition for three types of distinctive bedforms that emerged through deformation of existing ripples due to waning wave power. They were ripple marks with: (1) a single secondary crest, (2) double secondary crests, and (3) a rounded crest. Data were analysed using two parameters, kh and d₀/λ_*, where k is the wave number, h is the water depth, d₀ is the near‐bottom orbital diameter, and λ_* is the spacing of existing ripples. The former quantity, kh, was employed as a surrogate for the degree of ?ow asymmetry. The result showed that ripples with secondary crests developed under a rather symmetrical ?ow ?eld with kh ? 0·7, if d₀/λ_* ? 1·2, whereas rounded‐crest ripples emerged under asymmetrical ?ow ?eld with kh ? 0·7, if d₀/λ_* ? ?2·9 kh + 3·2. The number of secondary crests, which initially occurred in each trough, was single if d₀/λ_* ? 0·8, or double if d₀/λ_* ? 0·8. Copyright © 2004 John Wiley & Sons, Ltd.     

Wave set-up in the storm surge along open coasts during Typhoon Anita

Wave set-up in storm surges is studied using a numerical model for coasts in Tosa Bay, Japan, open to the Pacific Ocean. Simulation models employing only atmospheric pressures and winds as external forces are unable to properly simulate open coast storm surge heights, such as those due to Typhoon Anita (1970). However, the present study shows that a numerical model incorporating wave-induced radiation stresses, as well as wind stresses and pressure gradients, is able to account for the open coast surge heights. There is a maximum contribution of 40% by the radiation stresses to the peak sea level rises. This study also evaluates the effects of the tides; including the tides improves the agreement between the predicted water surface elevations and the observations. The difference in predictions between one-way coupling from wave to surge models and two-way coupling of the surge and wave models is found to be small.     

P - V - T equation of state of stishovite to the mantle transition zone conditions

In-situ synchrotron X-ray diffraction experiments were conducted using the SPEED-1500 multi-anvil press of SPring-8 on stishovite SiO₂ and pressure-volume-temperature data were collected at up to 22.5 GPa and 1,073 K, which corresponds to the pressure conditions of the base of the mantle transition zone. The analysis of room-temperature data yielded V₀=46.56(1) ų, K_{T 0}=296(5) GPa and K _T =4.2(4), and these properties were consistent with the subsequent thermal equation of state (EOS) analyses. A fit of the present data to high-temperature Birch-Murnaghan EOS yielded (K_T /T) _P =–0.046(5) GPa K^–1 and = a + bT with values of a =1.26(11)×10^–5 K^–1 and b =1.29(17)×10^–8 K^–2. A fit to the thermal pressure EOS gives ₀=1.62(9)×10^–5 K^–1, ( K _T / T) _V =–0.027(4) GPa K^–1 and (²P /T ²) _V =27(5)×10^–7 GPa K^–2. The lattice dynamical approach by Mie-Grüneisen-Debye EOS yielded ₀=1.33(6), q =6.1(8) and ₀=1160(120) K. The strong volume dependence of the thermal pressure of stishovite was revealed by the analysis of present data, which was not detectable by the previous high-temperature data at lower pressures, and this yields ( K _T / T) _V 0 and q 1. The analyses for the fictive volume for a and c axes show that relative stiffness of c axis to a axis is similar both on compression and thermal expansion. Present EOS enables the accurate estimate of density of SiO₂ in the deep mantle conditions.     

Three-dimensional gas-dynamical modeling of changes in the flow structure during the transition from the quiescent to the active state in symbiotic stars

The results of three-dimensional modeling of the flow structure in the classical symbiotic system Z Andromedae are presented. Outbursts in systems of this type occur when the accretion rate exceeds the upper limit of the steady-burning range. Therefore, in order to realize the transition from a quiescent to an active state, it is necessary to find a mechanism capable of sufficiently increasing the accretion rate on the time scales typical for outburst development. Our calculations provide support for a mechanism for the transition from quiescence to outburst in classical symbiotic systems suggested earlier based on two-dimensional calculations (Bisikalo et al., 2002). Our results show that an accretion disk forms in the system for a wind velocity of 20 km s^?1. The accretion rate for the solution with the disk is ～22.5–25% of the mass-loss rate of the donor, which is ～4.5?5 × 10^?8M_⊙ yr^?1 for Z And. This value is in agreement with the steady-burning range for the white-dwarf masses usually accepted for this system. When the wind velocity increases from 20 to 30 km s^?1, the accretion disk is destroyed and the disk material falls onto the accretor surface. This process is followed by an approximately twofold jump in the accretion rate. The resulting growth in the accretion rate is sufficient so as to exceed the upper limit of the steady-burning range, thus bringing the system into an active state. The time during which the accretion rate is above the steady-burning value is in very good agreement with observations. Our analysis leads us to conclude that small variations in the donor wind velocity can lead to the transition from disk accretion to wind accretion and, as a consequence, to the transition from a quiescent to an active state in classical symbiotic stars.     

Distribution of nitrogen-fixing bacteria in the Central Pacific Ocean

The plate culture method using the two formulae for non-nitrogenous media was adopted in this investigation for the purpose of counting and isolating nitrogen-fixing bacteria distributed in the open sea. Sea water samples were collected at eighteen different stations in the region of Lat. 50°N–15°S along Long. 155°W and two other stations in the Pacific Ocean. In order to compare with those samples from the open sea, water samples were also obtained at four stations in Suruga and Sagami Bays. Nitrogen-fixing bacteria appear to be widely but very unevenly distributed at all depths in sea water, in numbers approximately ranging from nil to 10⁴ per 100 ml of sea water, and denser vertical populations have been found in the area of Lat. 40°N and 5°N along Long. 155°W, even at depths from 2,000 to 3,000m. A conparatively denser population of bacteria was found in sea water from Suruga Bay and Sagami Bay. The bacteria associated with plankton were abundantly demonstrated, in numbers ranging from 10⁶ to 10⁸ per 1 ml settling volume of plankton, in many plankton samples collected at four stations in the southern parts of the Pacific Ocean. Almost all the bacteria isolated from the samples of blue green algal colonies,Trichodesmium, sp., were able to grow on nonnitrogeneous media.     

Twin formation in hematite during dehydration of goethite

Twin formation in hematite during dehydration was investigated using X-ray diffraction, electron diffraction, and high-resolution transmission electron microscopy (TEM). When synthetic goethite was heated at different temperatures between 100 and 800 °C, a phase transformation occurred at temperatures above 250 °C. The electron diffraction patterns showed that the single-crystalline goethite with a growth direction of [001]_G was transformed into hematite with a growth direction of [100]_H. Two non-equivalent structures emerged in hematite after dehydration, with twin boundaries at the interface between the two variants. As the temperature was increased, crystal growth occurred. At 800 °C, the majority of the twin boundaries disappeared; however, some hematite particles remained in the twinned variant. The electron diffraction patterns and high-resolution TEM observations indicated that the twin boundaries consisted of crystallographically equivalent prismatic (100) (010), and (1\(\bar{1}\)0) planes. According to the total energy calculations based on spin-polarized density functional theory, the twin boundary of prismatic (100) screw had small interfacial energy (0.24 J/m²). Owing to this low interfacial energy, the prismatic (100) screw interface remained after higher-temperature treatment at 800 °C.     

Multi‐scale Decomposition of Co‐seismic Deformation from High Resolution DEMs: a Case Study of the 2004 Mid‐Niigata Earthquake

Decomposing co-seismic deformation is an immediate need for researchers who are interested in earthquake inversion analysis and geo-hazard mapping. However, conventional InSAR or digital elevation models (DEMs) imagery analyses only provide the displacement in the Line-of-Sight (LOS) direction or elevation changes. The 2004 Mid-Niigata earthquake in Japan provides lessons on how to decompose co-seismic deformation from two sets of DEMs. If three adjacent points undergo a rigid-body-translation movement, their co-seismic deformation can be decomposed by solving simultaneous equations. Although this method has been successfully used to discuss tectonic deformations, the algorithm needed improvement and a more rigorous algorithm, including a new definition of nominal plane, DEMs comparability improvement and matrix condition check is provided. Even with these procedures, the obtained decomposed displacement often showed remarkable scatter prompting the use of the moving average method, which was used to determine both tectonic and localized displacement characteristics. A cut-off window and a pair of band-pass windows were selected according to the regional geology and construction activities to ease the tectonic and localized displacement calculations, respectively. The displacement field of the tectonic scale shows two major clusters of large lateral components, and coincidently major visible landslides were found mostly within them. The localized displacement helps to reveal hidden landslides in the target area. As far as the Kizawa hamlet is concerned, the obtained vectors show down-slope movements, which are consistent with the observed traces of dislocations that were found in the Kizawa tunnel and irrigation wells. The method proposed has great potential to be applied to understanding post-earthquake rehabilitation in other areas.