Calibration of cyclic constitutive models by oscillating functions

Most structures are subjected to more cyclic loads during their life time than static loads. These cyclic action could be a result of either natural or man-made activities and may lead to soil failure. In order to understand the response of the foundation and its interaction with these complex cyclic loadings, various researchers have over the years developed different constitutive models. Although a lot of research is being carried out on these relatively new models, little or no details exist in literature about the model-based identification of the cyclic constitutive parameters which to a large extent govern the quality of the model output. This could be attributed to the difficulties and complexities of the inverse modeling of such complex phenomena. A variety of optimisation strategies are available for the solution of the sum of least-squares problems as usually done in the field of model calibration. However, for the back analysis (calibration) of the soil response to oscillatory load functions, this article gives insight into the model calibration challenges and also puts forward a method for the inverse modeling of cyclic loaded foundation response such that high-quality solutions are obtained with minimum computational effort.     

Estimation of commercial diamond grades based on microdiamonds: a case study of the Koidu diamond mine,Sierra Leone

This paper documents the application of a microdiamond-based approach to the estimation of diamond grade in the Pipe 1 kimberlite at the Koidu mine in Sierra Leone. A geological model of Pipe 1 was constructed to represent the distribution and volume of the dominant kimberlite units within the pipe. Bulk samples, along with representative microdiamond samples, were collected from these units at surface and were used to define the ratio between microdiamond stone frequency (+212 μm stones per kilogram) and recoverable macrodiamond grade (+1.2 mm carats per tonne; 1 carat = 0.2 g). These ratios were applied to a comprehensive, spatially representative microdiamond sample dataset and were combined with a spatial model of country-rock xenolith dilution within the pipe to estimate +1.2 mm recoverable grades. The resource estimate was reconciled with subsequent production results in the elevation range 160 to 100 m above sea level. Production results for each of the six 10 m benches covering this elevation range were compared to the estimated average grades for these zones in the pipe. For the five cases where most of the kimberlite mass on a given bench is represented in the production data, the results show a maximum discrepancy of 6% between predicted and reported production grade with no indication of any consistent bias. This indicates that, when supported by a sound geological model and suitable microdiamond and macrodiamond data, the microdiamond-based estimation approach can provide reliable constraints on macrodiamond grade, even in the case of geologically complex bodies such as Koidu Pipe 1.

     

Pattern,style and timing of British–Irish Ice Sheet advance and retreat over the last 45 000 years: evidence from NW Scotland and the adjacent continental shelf

Predicting the future response of ice sheets to climate warming and rising global sea level is important but difficult. This is especially so when fast-flowing glaciers or ice streams, buffered by ice shelves, are grounded on beds below sea level. What happens when these ice shelves are removed? And how do the ice stream and the surrounding ice sheet respond to the abruptly altered boundary conditions? To address these questions and others we present new geological, geomorphological, geophysical and geochronological data from the ice-stream-dominated NW sector of the last British–Irish Ice Sheet (BIIS). The study area covers around 45 000 km² of NW Scotland and the surrounding continental shelf. Alongside seabed geomorphological mapping and Quaternary sediment analysis, we use a suite of over 100 new absolute ages (including cosmogenic-nuclide exposure ages, optically stimulated luminescence ages and radiocarbon dates) collected from onshore and offshore, to build a sector-wide ice-sheet reconstruction combining all available evidence with Bayesian chronosequence modelling. Using this information we present a detailed assessment of ice-sheet advance/retreat history, and the glaciological connections between different areas of the NW BIIS sector, at different times during the last glacial cycle. The results show a highly dynamic, partly marine, partly terrestrial, ice-sheet sector undergoing large size variations in response to sub-millennial-scale climatic (Dansgaard–Oeschger) cycles over the last 45 000 years. Superimposed on these trends we identify internally driven instabilities, operating at higher frequency, conditioned by local topographic factors, tidewater dynamics and glaciological feedbacks during deglaciation. Specifically, our new evidence indicates extensive marine-terminating ice-sheet glaciation of the NW BIIS sector during Greenland Stadials 12 to 9 – prior to the main ‘Late Weichselian’ ice-sheet glaciation. After a period of restricted glaciation, in Greenland Interstadials 8 to 6, we find good evidence for rapid renewed ice-sheet build-up in NW Scotland, with the Minch ice-stream terminus reaching the continental shelf edge in Greenland Stadial 5, perhaps only briefly. Deglaciation of the NW sector took place in numerous stages. Several grounding-zone wedges and moraines on the mid- and inner continental shelf attest to significant stabilizations of the ice-sheet grounding line, or ice margin, during overall retreat in Greenland Stadials 3 and 2, and to the development of ice shelves. NW Lewis was the first substantial present-day land area to deglaciate, in the first half of Greenland Stadial 3 at a time of globally reduced sea-level c. 26 kabp , followed by Cape Wrath at c. 24 kabp. The topographic confinement of the Minch straits probably promoted ice-shelf development in early Greenland Stadial 2, providing the ice stream with additional support and buffering it somewhat from external drivers. However, c. 20–19 kabp , as the grounding-line migrated into shoreward deepening water, coinciding with a marked change in marine geology and bed strength, the ice stream became unstable. We find that, once underway, grounding-line retreat proceeded in an uninterrupted fashion with the rapid loss of fronting ice shelves – first in the west, then the east troughs – before eventual glacier stabilization at fjord mouths in NW Scotland by ~17 kabp. Around the same time, ~19–17 kabp , ice-sheet lobes readvanced into the East Minch – possibly a glaciological response to the marine-instability-triggered loss of adjacent ice stream (and/or ice shelf) support in the Minch trough. An independent ice cap on Lewis also experienced margin oscillations during mid-Greenland Stadial 2, with an ice-accumulation centre in West Lewis existing into the latter part of Heinrich Stadial 1. Final ice-sheet deglaciation of NW mainland Scotland was punctuated by at least one other coherent readvance at c. 15.5 kabp , before significant ice-mass losses thereafter. At the glacial termination, c. 14.5 kabp , glaciers fed outwash sediment to now-abandoned coastal deltas in NW mainland Scotland around the time of global Meltwater Pulse 1A. Overall, this work on the BIIS NW sector reconstructs a highly dynamic ice-sheet oscillating in extent and volume for much of the last 45 000 years. Periods of expansive ice-sheet glaciation dominated by ice-streaming were interspersed with periods of much more restricted ice-cap or tidewater/fjordic glaciation. Finally, this work indicates that the role of ice streams in ice-sheet evolution is complex but mechanistically important throughout the lifetime of an ice sheet – with ice streams contributing to the regulation of ice-sheet health but also to the acceleration of ice-sheet demise via marine ice-sheet instabilities.     

Small-strain behaviour of unsaturated silty clay: experiments and model interpretation

Acta Geotechnica - The experimental data dealing with the so-called small strain stiffness of soils are indispensable in developing and calibrating advanced numerical models. A literature review...     

Assessment of boundary-element method for modelling a free-floating sloped wave energy device. Part 1: Numerical modelling

The boundary-element method has been widely used as a design tool in the offshore and ship building industry for more than 30 years. Its application to wave energy conversion is, however, more recent. This paper deals with the numerical modelling of a free-floating sloped wave energy device. The power take-off mechanism of the device consists of an immersed tube with a piston sliding inside. The modelling is done using the boundary-element method package WAMIT. The model is first worked out for the case where the axis of the tube is vertical. It is then derived for the tube inclined and successfully verified against numerical benchmark data. A companion paper presents results of a detailed comparison with a physical model study.     

Inter-annual variability in phytoplankton summer blooms in the freshwater tidal reaches of the Schelde estuary (Belgium)

The inter-annual variability in phytoplankton summer blooms in the upper reaches of the Schelde estuary was investigated between 1996 and 2005 by monthly sampling at 10 stations. The large inter-annual variations of the chlorophyll a concentration in the freshwater tidal reaches were independent from variations in chlorophyll a in the tributary river Schelde. Summer mean chlorophyll a concentrations were significantly negatively correlated with flushing rate (Spearman correlation: r = −0.67, p = 0.05, n = 9) but not with temperature, irradiance and suspended particulate matter or dissolved silica (DSi) concentrations. During dry summers, low flushing rates permitted the development of dense phytoplankton populations in the upper part of the estuary, while during wet summers high flushing rates prevented the development of dense phytoplankton blooms. Flushing rate was also found to be important for the phytoplankton community composition. At low flushing rates, the community was dominated by diatoms that developed within the upper estuary. At high flushing rates, chlorophytes imported from the tributary river Schelde became more important in the phytoplankton community. The position of the chlorophyll a maximum shifted from the head of the estuary when flushing rates were low, to more downstream when flushing rates were high. Although DSi concentrations tended to be lower during years of high phytoplankton (mainly diatom) biomass, the relation with flushing rate was not significant.     

Spatiotemporal aspects of silica buffering in restored tidal marshes

Losses of pelagic diatom production resulting from silica limitation have not only been blamed for toxic algal blooms, but for the reduction in ability of coastal food webs to support higher trophic levels. Recent research has shown the importance of advective seepage water fluxes of dissolved silica (DSi) from freshwater marshes to pelagic waters during moments of riverine Si-limitation. In this study, we investigated the potential impact of recently installed new tidal areas along the Schelde estuary, located in former polder areas and characterized by so-called controlled reduced tidal regimes (CRT). Nine mass-balance studies were conducted in a newly constructed CRT in the freshwater Schelde estuary. During complete tidal cycles both DSi and amorphous silica (ASi) concentrations were monitored at the entrance culverts and in different habitats in the marsh. A swift DSi-delivery capacity was observed despite the shifted spatiotemporal frame of exchange processes compared to reference marshes. As silica-accumulating vegetation is not yet present, and difference with reference marshes’ deliveries is surprisingly small, we indicate diatomaceous debris and phytoliths to be the main silica source. Although further research is necessary on the driving forces of the different processes involved, restoration of former agricultural areas under CRT-regime provide the potential to buffer silica in the estuary.     

Observations of wave pump efficiency

Currently available data on wave pump efficiency is reviewed. The obtainable efficiency is an important consideration in the design of practical devices for the extraction of wave energy and the analysis of natural systems (e.g., coral flats and rip currents). We find that the peak efficiency is 0.5 for very steep (∼ 40–45°) ramps where the waves break over the top of the ramp. For flatter (< 30°) ramps, the breaking process is more gradual and the peak efficiency is less than 0.1. We have identified natural atoll lagoon systems where the flushing is wave driven and successfully modeled it as driven by a wave pump. The same is the case for rip currents. For both of these natural systems, the pump efficiency is around 0.035. In addition a numerical swash model is used to estimate wave pump efficiency and is seen to match the experimental results for natural systems or breaking wave scenario.