A reanalysis of the Apollo light scattering observations, and implications for lunar exospheric dust

Conspicuous excess brightness, exceeding that expected from coronal and zodiacal light (CZL), was observed above the lunar horizon in the Apollo 15 coronal photographic sequence acquired immediately after orbital sunset (surface sunrise). This excess brightness systematically faded as the Command Module moved farther into shadow, eventually becoming indistinguishable from the CZL background. These observations have previously been attributed to scattering by ultrafine dust grains (radius ∼0.1 microns) in the lunar exosphere, and used to obtain coarse estimates of dust concentration at several altitudes and an order-of-magnitude estimate of ∼10⁻⁹ g cm⁻² for the column mass of dust near the terminator, collectively referred to as model “0”.We have reanalyzed the Apollo 15 orbital sunset sequence by incorporating the known sightline geometries in a Mie-scattering simulation code, and then inverting the measured intensities to retrieve exospheric dust concentration as a function of altitude and distance from the terminator. Results are presented in terms of monodisperse (single grain size) dust distributions. For a grain radius of 0.10 microns, our retrieved dust concentration near the terminator (∼0.010 cm⁻³) is in agreement with model “0” at z=10 km, as is the dust column mass (∼3–6×10⁻¹⁰ g cm⁻²), but the present results indicate generally larger dust scale heights, and much lower concentrations near 1 km (<0.08 cm⁻³ vs. a few times 0.1 cm⁻³ for model “0"). The concentration of dust at high altitudes (z>50 km) is virtually unconstrained by the measurements. The dust exosphere extends into shadow a distance somewhere between 100 and 200 km from the terminator, depending on the uncertain contribution of CZL to the total brightness. These refined estimates of the distribution and concentration of exospheric dust above the lunar sunrise terminator should place new and more rigorous constraints on exospheric dust transport models, as well as provide valuable support for upcoming missions such as the Lunar Atmosphere and Dust Environment Explorer (LADEE).     

Global-Mode Analysis of Full-Disk Data from the <Emphasis Type="Italic">Michelson Doppler Imager</Emphasis> and the <Emphasis Type="Italic">Helioseismic and Magnetic Imager</Emphasis>

Building upon our previous work, in which we analyzed smoothed and subsampled velocity data from the Michelson Doppler Imager (MDI), we extend our analysis to unsmoothed, full-resolution MDI data. We also present results from the Helioseismic and Magnetic Imager (HMI), in both full resolution and processed to be a proxy for the low-resolution MDI data. We find that the systematic errors that we saw previously, namely peaks in both the high-latitude rotation rate and the normalized residuals of odd \(a\)-coefficients, are almost entirely absent in the two full-resolution analyses. Furthermore, we find that both systematic errors seem to depend almost entirely on how the input images are apodized, rather than on resolution or smoothing. Using the full-resolution HMI data, we confirm our previous findings regarding the effect of using asymmetric profiles on mode parameters, and also find that they occasionally result in more stable fits. We also confirm our previous findings regarding discrepancies between 360-day and 72-day analyses. We further investigate a six-month period previously seen in \(f\)-mode frequency shifts using the low-resolution datasets, this time accounting for solar-cycle dependence using magnetic-field data. Both HMI and MDI saw prominent six-month signals in the frequency shifts, but we were surprised to discover that the strongest signal at that frequency occurred in the mode coverage for the low-resolution proxy. Finally, a comparison of mode parameters from HMI and MDI shows that the frequencies and \(a\)-coefficients agree closely, encouraging the concatenation of the two datasets.     

The Jiddat al Harasis 073 strewn field,Sultanate of Oman

Abstract— The recently discovered Jiddat al Harasis (JaH) 073 strewn field is the largest found so far in the Sultanate of Oman, covering an area of 19 × 6 km. The 3463 single stones collected range in weight from 52.2 kg down to <1 g (total weight 600.8 kg) and show a pronounced mass sorting. The strewn field shape can be approximated by a NW‐SE‐oriented ellipsoid, indicating an atmospheric entry from SE at a low angle relative to the surface. The meteorite belongs to the L6 ordinary chondrite group and shows S4 average shock grade. Smaller stones generally show a higher weathering grade resulting in a spread from W2 and W4. Enhanced weathering of the stones causing fragmentation after the fall is observed in sandy depressions. Five ¹⁴C measurements on stones of variable size and weathering grade yielded ¹⁴C from 3.8 to 49.9 dpm/kg. Three samples give a ¹⁴C/ ¹⁰Be age consistent with about 14.4 ka. For two samples the cosmogenic, trapped, and radiogenic noble gases were measured. The ratio of the ⁴He and ⁴⁰Ar gas retention ages of 0.29 ± 0.10 and that of the ³He and ²¹Ne cosmic ray exposure ages of 0.36 ± 0.08 Ma indicate that JaH 073 experienced a complex exposure history and lost ⁴He and ⁴⁰Ar due to a major collision. Fragmentation statistics indicate a single major atmospheric disruption and an originally relatively spherical shape of the object. Assuming the material collected represents the majority of fallen mass, and 90–99% of the original weight was lost by ablation, the pre‐atmospheric minimum radius of the meteoroid with density 3.4 g cm^?3would have been at least 75 cm.     

Spectra of extremely reduced assemblages: Implications for Mercury

Abstract— We investigate the possibility that Mercury's crust is very reduced with FeO concentrations of less than ?0.1 wt%. We believe that such a surface could have a composition of enstatite, plagioclase, diopside, and sulfide, similar to the mineral assemblages found in aubritic meteorites. To test this hypothesis, we investigated the spectra of aubrites and their constituent minerals as analogs for the surface of Mercury. We found that some sulfides have distinctive absorption features in their spectra shortwards of ?0.6 μm that may be apparent in the spectrum of such an object. Determination of the surface composition of Mercury using orbital x‐ray spectroscopy should easily distinguish between a lunar highlands and enstatite basalt composition since these materials have significant differences in concentrations of Al, Mg, S, and Fe. The strongest argument against Mercury having an enstatite basalt composition is its extreme spectral redness. Significant reddening of the surface of an object (such as Mercury) is believed to require reduction of FeO to nanophase iron, thus requiring a few percent FeO in the material prior to alteration.     

Petrologic insights from the spectra of the unbrecciated eucrites: Implications for Vesta and basaltic asteroids

Abstract– We investigate the relationship between the petrology and visible–near infrared spectra of the unbrecciated eucrites and synthetic pyroxene–plagioclase mixtures to determine how spectra obtained by the Dawn mission could distinguish between several models that have been suggested for the petrogenesis of Vesta’s crust (e.g., partial melting and magma ocean). Here, we study the spectra of petrologically characterized unbrecciated eucrites to establish spectral observables, which can be used to yield mineral abundances and compositions consistent with petrologic observations. No information about plagioclase could be extracted from the eucrite spectra. In contrast, pyroxene dominates the spectra of the eucrites and absorption band modeling provides a good estimate of the relative proportions of low‐ and high‐Ca pyroxene present. Cr is a compatible element in eucrite pyroxene and is enriched in samples from primitive melts. An absorption at 0.6 μm resulting from Cr³⁺ in the pyroxene structure can be used to distinguish these primitive eucrites. The spectral differences present among the eucrites may allow Dawn to distinguish between the two main competing models proposed for the petrogenesis of Vesta (magma ocean and partial melting). These models predict different crustal structures and scales of heterogeneity, which can be observed spectrally. The formation of eucrite Allan Hills (ALH) A81001, which is primitive (Cr‐rich) and relatively unmetamorphosed, is hard to explain in the magma ocean model. It could only have been formed as a quench crust. If the magma ocean model is correct, then ALHA81001‐like material should be abundant on the surface of Vesta and the Vestoids.     

Postglacial vegetation and climate dynamics in the Seymour‐Belize Inlet Complex,central coastal British Columbia,Canada: palynological evidence from Tiny Lake

A pollen‐based study from Tiny Lake in the Seymour‐Belize Inlet Complex of central coastal British Columbia, Canada, permits an evaluation of the dynamic response of coastal temperate rainforests to postglacial climate change. Open Pinus parklands grew at the site during the early Lateglacial when the climate was cool and dry, but more humid conditions in the later phases of the Lateglacial permitted mesophytic conifers to colonise the region. Early Holocene conditions were warmer than present and a successional mosaic of Tsuga heterophylla and Alnus occurred at Tiny Lake. Climate cooling and moistening at 8740 ± 70 ¹⁴C a BP initiated the development of closed, late successional T. heterophylla–Cupressaceae forests, which achieved modern character after 6860 ± 50 ¹⁴C a BP, when a temperate and very wet climate became established. The onset of early Holocene climate cooling and moistening at Tiny Lake may have preceded change at more southern locations, including within the Seymour‐Belize Inlet Complex, on a meso‐ to synoptic scale. This would suggest that an early Holocene intensification of the Aleutian Low pressure system was an important influence on forest dynamics in the Seymour‐Belize Inlet Complex and that the study region was located near the southern extent of immediate influence of this semi‐permanent air mass. Copyright © 2008 John Wiley & Sons, Ltd.     

Combining borehole temperature and meteorologic data to constrain past climate change

Geothermal observations from a suite of boreholes in western Utah, USA, combined with meteorologic data at nearby weather stations are used to test the hypothesis that temperatures in the earths subsurface contain an accurate record of recent climate change. The change in air temperature over the last hundred years successfully predicts detailed subsurface temperature profiles to better than ±0.05°C, indicating that ground temperatures tract air temperatures over long periods and that climate change signals are conducted into, and recorded in, the solid earth by the process of heat conduction. We combine borehole temperature data with meteorologic data from the nearest weather station to determine the time averaged difference between surface ground temperature and surface air temperature for borehole-weather station pairs and to infer the long term mean air temperature prior to the observational record. For our western Utah sites the preobservational mean temperature is close to the average surface air temperature for this century suggesting that up to 0.5°C of warming deduced from the last 100 years of weather station data may be attributed to recovery from a cool period at the turn of the century.     

Searching for r-process-enhanced stars in the LAMOST surveyⅠ:the method

The abundance patterns of r-process-enhanced stars contain key information required to constrain the astrophysical site(s)of r-process nucleosynthesis,and to deepen our understanding of the chemical evolution of our Galaxy.To expand the sample of known r-process-enhanced stars,we have developed a method to search for candidates in the LAMOST medium-resolution(R7500)spectroscopic survey by matching the observed spectra to synthetic templates around the EuⅡline at 6645.1 A.We obtain a sample of 13 metal-poor(-2.35<[Fe/H]<-0.91)candidates from 12209 unique stars with 32774 mediumresolution spectra.These candidates will be further studied by high-resolution follow-up observations in the near future.We describe some extensions of this effort to include larger samples of stars,in particular at lower metallicity,using the strength of the BaⅡline at 6496.9 A.     

Identification and analysis of structures in the corona from X-ray photography

This paper summarizes the results of a program of rocket observations of the solar corona with grazing incidence X-ray telescopes. A series of five flights of a Kanigen-surfaced telescope with a few arc seconds resolution, together with the first flight of a newer telescope have resulted in the identification of six classes of coronal structures observable in the X-ray photographs. These are: active regions, active region interconnections, large loop structures associated with unipolar magnetic regions, coronal holes, coronal bright points, and the structures surrounding filament cavities. Two solar flares have been observed. The methods involved in deriving coronal temperature and density information from X-ray photographs are described and the analysis of a bright active region (McMath plage 11035) observed at the west limb on November 24, 1970 is presented as an example of these techniques.This paper originated in an invited talk presented by one of us (G.V.) at the COSPAR Symposium on High Resolution Astronomical Observations from Space, Seattle, Washington, June 29, 1971. In addition, it includes material presented at the three NASA OSO workshops, as well as more recent work.