The economic diplomacy of geoengineering

Geoengineering is a new term, still seeking a definition. It seems to imply something global, intentional, and unnatural. For the radiation balance, geoengineering may be fifty years in the future; today's means may be out of date then, and the future means are not yet known. It might immensely simplify greenhouse policy, transforming it from an exceedingly complicated regulatory regime to a problem in international cost sharing, a problem that we are familiar with. Putting things in the stratosphere or in orbit can probably be done by exo-national programs, not depending on the behavior of populations, not requiring national regulations or incentives, not dependent on universal participation. It will involve merely deciding what to do, how much to do, and who is to pay for it.     

Two-stage aquifer pumping subject to slow desorption and persistent sources

This work focuses on improving pump-and-treat remediation by optimizing a two-stage operational scheme to reduce volumes extracted when confronted with nonequilibrium desorption, low-permeability units, and continuous contaminant sources such as non-aqueous phase liquids (NAPL). Q1 and Q2 are the initial short-term high pumping rate and later long-term low pumping rate, respectively. A two-dimensional ground water flow and transport management model was used to test the proposed strategy for plumes developed from finite (NAPL-free) and continuous (NAPL-driven) contaminant sources in homogeneous and nonhomogeneous (zoned) aquifers. Remediation scenarios were simulated over durations of 2000, 6000, and 15,000 d to determine (1) the optimal time to switch from a preset Q1 to Q2 and (2) the value of Q2. The problem was constrained by mass removal requirements, maximum allowable downgradient concentrations, and practical bounds on Q2. Q1 was fixed at preset values 50% to 200% higher than the single-stage pumping rates (i.e., steady pumping rates during entire remediation period) necessary to achieve a desired cleanup level and capture the plume. Results for the NAPL-free homogeneous case under nonequilibrium desorption conditions achieved the same level of cleanup as single-stage pumping, while reducing extracted volumes by up to 36%. Comparable savings were obtained with NAPL-driven sources only when the source concentration was reduced by at least 2 orders of magnitude. For the zoned aquifer, the proposed strategy provided volume savings of up to 24% under NAPL-free and reduced source conditions.     

The Mars oxidant experiment (MOx) for Mars '96

The MOx instrument was developed to characterize the reactive nature of the martian soil. The objectives of MOx were: (1) to measure the rate of degradation of organics in the martian environment; (2) to determine if the reactions seen by the Viking biology experiments were caused by a soil oxidant and measure the reactivity of the soil and atmosphere: (3) to monitor the degradation, when exposed to the martian environment, of materials of potential use in future missions; and, finally, (4) to develop technologies and approaches that can be part of future soil analysis instrumentation. The basic approach taken in the MOx instrument was to place a variety of materials composed as thin films in contact with the soil and monitor the physical and chemical changes that result. The optical reflectance of the thin films was the primary sensing-mode. Thin films of organic materials, metals, and semiconductors were prepared. Laboratory simulations demonstrated the response of thin films to active oxidants.     

Europe adapts to climate change: Comparing National Adaptation Strategies

For the last two decades, European climate policy has focused almost exclusively on mitigation of climate change. It was only well after the turn of the century, with impacts of climate change increasingly being observed, that adaptation was added to the policy agenda and EU Member States started to develop National Adaptation Strategies (NASs). This paper reviews seven National Adaptation Strategies that were either formally adopted or under development by Member States at the end of 2008. The strategies are analysed under the following six themes. Firstly, the factors motivating and facilitating the development of a national adaptation strategy. Secondly, the scientific and technical support needed for the development and implementation of such a strategy. Thirdly, the role of the strategy in information, communication and awareness-raising of the adaptation issue. Fourthly, new or existing forms of multi-level governance to implement the proposed actions. Fifthly, how the strategy addresses integration and coordination with other policy domains. Finally, how the strategy suggests the implementation and how the strategy is evaluated. The paper notes that the role of National Adaptation Strategies in the wider governance of adaptation differs between countries but clearly benchmarks a new political commitment to adaptation at national policy levels. However, we also find that in most cases approaches for implementing and evaluating the strategies are yet to be defined. The paper concludes that even though the strategies show great resemblance in terms of topics, methods and approaches, there are many institutional challenges, including multi-level governance and policy integration issues, which can act as considerable barriers in future policy implementation.     

Graded-Density Reservoirs for Accessing High Stress Low Temperature Material States

In recently developed laser-driven shockless compression experiments an ablatively driven shock in a primary target is transformed into a ramp compression wave in a secondary target via unloading followed by stagnation across an intermediate vacuum gap. Current limitations on the achievable peak longitudinal stresses are limited by the ability of shaping the temporal profile of the ramp compression pulse. We report on new techniques using graded density reservoirs for shaping the loading profile and extending these techniques to high peak pressures.     

Longleaf Pine (Pinus palustris Mill.) Morphology and Climate/Growth Responses Along a Physiographic Gradient in North Carolina

Geographic differences in tree morphology and climate and growth responses of longleaf pine have been documented, yet how these differences vary at a larger scale has not. In this study, we documented changes in tree morphology and climate and radial growth responses of six longleaf pine (Pinus palustris Mill.) stands in three physiographic regions in North Carolina. We sampled from more than fifteen trees per stand and compared site- and regional-level total and latewood ring width values to temperature, precipitation, and drought. All morphological characteristics expressed a strong west–east gradient. Climate and radial growth response was strongest for the Sandhills region and then Piedmont and Coastal Plain regions. The distinct morphological characteristic gradient did not covary with climate and radial growth response, suggesting that additional environmental influences affect needle length, trunk diameter, and height.     

Response of hydrological cycle to recent climate changes in the Tibetan Plateau

The Tibetan Plateau (TP) surfaces have been experiencing an overall rapid warming and wetting while wind speed and solar radiation have been declining in the last three decades. This study investigated how climate changes influenced the hydrological cycle on the TP during 1984??2006. To facilitate the analysis, a land surface model was used to simulate surface water budget at all CMA (China Meteorological Administration) stations on the TP. The simulated results were first validated against observed ground temperature and observation-derived heat flux on the western TP and observed discharge trends on the eastern TP. The response of evaporation and runoff to the climate changes was then analyzed. Major finding are as follows. (1) Surface water balance has been changed in recent decades. Observed precipitation shows insignificant increasing trends in central TP and decreasing trends along the TP periphery while evaporation shows overall increasing trends, leading to decreased discharge at major TP water resource areas (semi-humid and humid zones in the eastern and southern TP). (2) At the annual scale, evaporation is water-limited in dry areas and energy-limited (radiation and air temperature) in wet areas; these constraints can be interpreted by the Budyko-curve. Evaporation in autumns and winters was strongly controlled by soil water storage in summers, weakening the dependence of evaporation on precipitation at seasonal scales. (3) There is a complementary effect between the simulated actual evaporation and potential evaporation, but this complementary relationship may deviate from Bouchet??s hypothesis when vapor pressure deficit (or air temperature) is too low, which suppresses the power of vapor transfer.     

Resistivity of reservoir sandstones and organic rich shales on the Barents Shelf:Implications for interpreting CSEM data

Marine controlled source electromagnetic(CSEM)data have been utilized in the past decade during petroleum exploration of the Barents Shelf,particularly for de-risking the highly porous sandstone reservoirs of the Upper Triassic to Middle Jurassic Realgrunnen Subgroup.In this contribution we compare the resistivity response from CSEM data to resistivity from wireline logs in both water-and hydrocarbon-bearing wells.We show that there is a very good match between these types of data,particularly when reservoirs are shallow.CSEM data,however,only provide information on the subsurface resistivity.Careful,geology-driven interpretation of CSEM data is required to maximize the impact on exploration success.This is particularly important when quantifying the relative re-sistivity contribution of high-saturation hydrocarbon-bearing sandstone and that of the overlying cap rock.In the presented case the cap rock comprises predominantly organic rich Upper Jurassic-Early Cretaceous shales of the Hekkingen Formation(i.e.a regional source rock).The resistivity response of the reservoir and its cap rock become merged in CSEM data due to the transverse resistance equivalence principle.As a result of this,it is imperative to understand both the relative contributions from reservoir and cap rock,and the geological sig-nificance of any lateral resistivity variation in each of the units.In this contribution,we quantify the resistivity of organic rich mudstone,i.e.source rock,and reservoir sandstones,using 131 exploration boreholes from the Barents Shelf.The highest resistivity(＞10,000 Ωm)is evident in the hydrocarbon-bearing Realgrunnen Subgroup which is reported from 48 boreholes,43 of which are used for this study.Pay zone resistivity is primarily controlled by reservoir quality(i.e.porosity and shale fraction)and fluid phase(i.e.gas,oil and water saturation).In the investigated wells,the shale dominated Hekkingen Formation exhibits enhanced resistivity compared to the background(i.e.the underlying and overlying stratigraphy),though rarely exceeds 20Ωm.Marine mudstones typically show good correlation between measured organic richness and resistivity/sonic velocity log signatures.We conclude that the resistivity contribution to the CSEM response from hydrocarbon-bearing sandstones out-weighs that of the organic rich cap rocks.     

“Dust” streaks on Mars

Global mapping and photometry of selected areas on Mars are used to investigate the nature of bright and dark wind streaks that extend from topographic obstacles. Occurrence of both bright and dark streaks is strongly latitude dependent and is only weakly correlated with surface properties such as albedo and thermal inertia. Data on the colors, albedos, and phase behavior of streaks are consistent with models of bright streaks as mosaics of plains material and brighter, redder dust. Less than 20% of the ground need be covered by the optically thick dust in the brightest parts of the streaks; the amount of dust in optically thick layers could be as little as 10^?3 g/cm². Dark streaks can be interpreted as erosional windows in a patchy dust cover. Our model of dust deposition in optically thick patches is sedimentologically different from scenarios involving the deposition of ubiquitous, optically thin layers. It has the advantage that large amounts of dust can be deposited without affecting regional albedos.