Compression of Na0.4Mg0.6Al1.6Si0.4O4 NAL and Ca-ferrite-type phases

Compression behaviors of two Al-rich phases in the lower mantle, hexagonal new aluminum-rich (NAL) phase and its high-pressure polymorph Ca-ferrite-type (CF) phase, were examined for identical Na_0.4Mg_0.6Al_1.6Si_0.4O₄ (40?% NaAlSiO₄–60?% MgAl₂O₄) composition. The volumes of the NAL and CF phases were obtained at room temperature up to 31 and 134?GPa, respectively, by a combination of laser-annealed diamond-anvil cell techniques and synchrotron X-ray diffraction measurements. Fitting of the third-order Birch–Murnaghan equation of state to such pressure–volume data yields bulk modulus K ₀?=?199(6) GPa at 1?bar and its pressure derivative K ₀′?=?5.0(6) for the NAL phase and K ₀?=?169(5) GPa and K ₀′?=?6.3(3) for the CF phase. These results indicate that the bulk modulus increases from 397 to 407 GPa across the phase transition from the NAL to CF phase at 43 GPa, where the NAL phase completely transforms into the CF phase on Na_0.4Mg_0.6Al_1.6Si_0.4O₄. Density also increases by 2.1?% across the phase transition.     

High-temperature compression experiments of CaSiO3 perovskite to lowermost mantle conditions and its thermal equation of state

In order to examine pressure–volume–temperature (P–V–T) relations for CaSiO₃ perovskite (Ca-perovskite), high-temperature compression experiments with in situ X-ray diffraction were performed in a laser-heated diamond anvil cell (DAC) to 127 GPa and 2,300 K. We also employed an external heating system in the DAC in order to obtain P–V data at a moderate temperature of 700 K up to 113 GPa, which is the reference temperature for constructing an equation of state. The P–V data at 700 K were fitted to the second-order Birch–Murnaghan equation of state, yielding K _700,1bar = 207 ± 4 GPa and V _700,1bar = 46.5 ± 0.1 Å³. Thermal pressure terms were evaluated in the framework of the Mie–Grüneisen–Debye model, yielding γ _700,1bar = 2.7 ± 0.3, q _700,1bar = 1.2 ± 0.8, and θ _700,1bar = 1,300 ± 500 K. A thermodynamic thermal pressure model was also employed, yielding α_700,1bar = 5.7 ± 0.5 × 10^?5/K and (?K/?T) _V  = ?0.010 ± 0.004 GPa/K. Computed densities along a lower mantle geotherm demonstrate that Ca-perovskite is denser than the surrounding lower mantle, suggesting that Ca-perovskite-rich rocks do not rise up through the lower mantle. One of such rocks might be a residue of partial melting of subducted mid-oceanic ridge basalt (MORB) at the base of the mantle. Since the partial melt is FeO-rich and therefore denser than the mantle, all the components of subducted MORB may not return to shallow levels.     

Simulating the diurnal cycle of rainfall in global climate models: resolution versus parameterization

The effects of horizontal resolution and the treatment of convection on simulation of the diurnal cycle of precipitation during boreal summer are analyzed in several innovative weather and climate model integrations. The simulations include: season-long integrations of the Non-hydrostatic Icosahedral Atmospheric Model (NICAM) with explicit clouds and convection; year-long integrations of the operational Integrated Forecast System (IFS) from the European Centre for Medium-range Weather Forecasts at three resolutions (125, 39 and 16 km); seasonal simulations of the same model at 10 km resolution; and seasonal simulations of the National Center for Atmospheric Research (NCAR) low-resolution climate model with and without an embedded two-dimensional cloud-resolving model in each grid box. NICAM with explicit convection simulates best the phase of the diurnal cycle, as well as many regional features such as rainfall triggered by advancing sea breezes or high topography. However, NICAM greatly overestimates mean rainfall and the magnitude of the diurnal cycle. Introduction of an embedded cloud model within the NCAR model significantly improves global statistics of the seasonal mean and diurnal cycle of rainfall, as well as many regional features. However, errors often remain larger than for the other higher-resolution models. Increasing resolution alone has little impact on the timing of daily rainfall in IFS with parameterized convection, yet the amplitude of the diurnal cycle does improve along with the representation of mean rainfall. Variations during the day in atmospheric prognostic fields appear quite similar among models, suggesting that the distinctive treatments of model physics account for the differences in representing the diurnal cycle of precipitation.     

花岗岩变形破坏的阶段性模型--应力速度及预存微裂纹密度对断层形成过程的影响

依据对具有较高微裂纹密度的筑波花岗岩和极低微裂纹密度的花岗斑岩 2种极端的岩石标本、在等应力速率的快速加载 (约 6MPa/min)和蠕变加载 (轴向应力保持在约 95 %破坏强度 ) 2个极端的加载条件下的实验结果 ,讨论了预存微裂纹密度与加载速度对多晶质结晶岩变形破坏过程的影响。实验中利用高速多通道声发射波形数字记录系统 (每秒可记录多达 5 0 0 0个声发射事件的 32通道波形 ) ,获得了岩石标本破坏前微破裂活动的详细时空分布数据。声发射的发生率、震级 -频度关系中的b值及震源的空间分布揭示出岩石变形破坏过程中微破裂活动具有 3个典型阶段 :初期阶段、第 2阶段和成核阶段。尤其是在成核阶段 ,还观测到发生率和b值有大幅度前兆性起伏。一般而言 ,在相同加载条件下预存微破裂密度越高 ,或对同一岩石加载速度越慢 ,对应的断层成核过程就越长 ,因此最终破坏的可预报性也越高。为了进一步探讨微破裂活动的阶段性特征及其物理本质 ,还利用亚临界破裂扩展模型对声发射数据进行了理论分析     

Distribution of boulders at Miyara Bay of Ishigaki Island,Japan: A flow characteristic indicator of tsunami and storm waves

This study investigates the distribution of boulders at Miyara Bay of Ishigaki Island, Japan. These boulders were deposited on a reef flat extending approximately 400–1300 m in width. Most boulders were rectangular to ellipsoidal, without sharp broken edges. They are reef and coral rock fragments estimated as <335 m³ (<633 t). Locally in the bay, the relationship between the boulder weight and position shows that boulders of a given weight have a clear limit on seaward distribution on the reef flat. For example, more than 1, 10, and 100 tons of boulders were deposited, respectively, more than 500, 300, and 100 m from the reef edge. The line is consistent with the possible landward transport limit by maximum storm waves at the Ryukyu Islands, suggesting that the line was formed by the reworking of some boulders by maximally strong storm waves, although we can not exclude the possibility that the line was formed by tsunamis. Furthermore, 68% of boulders at the bay are deposited beyond this line. Therefore, the presence of these boulders at their present positions is difficult to explain solely by storm waves, implying the possible tsunami origin of these boulders. The boulders are characteristically concentrated along the high‐tide line, suggesting the drastic reduction of the tsunami hydraulic force along the line. Previous studies using radiocarbon age dating, as well as our study, imply that at least 69 boulders at Miyara Bay were probably deposited at their present positions by the 1771 Meiwa tsunami, although some of these boulders might have been emplaced and displaced on the reef flat by prior tsunami or storm surges.     

Earthquake Nucleation on Faults with a Revised Rate- and State-Dependent Friction Law

Recently Nagata et al. (J Geophys Res 117:B02314, 2012) have proposed a new version of rate- and state-dependent friction law (RSF) that seems to have eventually resolved all the previously known discrepancies in the existing RSFs from laboratory observations. The values of a and b, empirical RSF parameters determined by fitting the same laboratory experiments, have been revised to be five times greater and a newly noticed weakening effect by shear stress with a coefficient c has been introduced. By using this revised RSF, we reinvestigated a problem of 2D quasi-static nucleation on faults. A crack-like nucleation-zone expansion known for the ‘aging’ version of RSF is not sustainable with the ‘Nagata’ law, which is understandable as the Nagata law does not produce a slip-weakening distance proportional to the involved strength reduction, an aging law’s feature that contradicts laboratory observations. The later stage of Nagata-law nucleation shows localization of quasi-static slip within a limited spatial extent, but the localization is much milder than that predicted by the ‘slip’ version of RSF. With an appropriate c parameter of the Nagata law, the nucleation size seems to be reduced only by a factor from that of the aging law.     

Simulation of tides in hydrocarbon lakes on Saturn’s moon Titan

Numerous hydrocarbon lakes have recently been detected on Saturn’s largest moon Titan, representing the only known large bodies of liquids on a planetary surface outside the Earth. In the context of comparative oceanography, tides and tidal currents in two representative lakes on Titan (Kraken Mare and Ontario Lacus) are simulated by a three-dimensional baroclinic ocean circulation model. Since the tide-generating force on Titan is an order of magnitude larger than on Earth and the gravitational acceleration is small, tides and currents are substantially larger than in Earth’s lakes and are more comparable with those in Earth’s oceans. The predicted maximum tidal range in Kraken Mare is 4 m. The tidal wave propagates around the basin of Kraken Mare, while a nearly standing tidal wave is excited in Ontario Lacus. Titan’s rotation is too slow to affect the tidal flow in any Titan’s lake. The tidal current velocity in Kraken Mare amounts to a few centimeters per second except in the vicinity of a narrow strait, where it is enhanced by an order of magnitude. In summer, when the lake is stratified, internal tides can develop. Seiches cannot be caused by tide. In the largest lakes, atmospheric tide may cause additional lake surface displacements.     

Preface to the Special Issue on Summer 2020: Record Rainfall in Asia — Mechanisms,Predictability and Impacts

Throughout vast areas of Asia, the summer of 2020 was extraordinarily wet. After an exceptionally wet May in North-east India and Bangladesh, excessive rainfall hit at least 10 provinces in central and southern China in June and July, caus-ing extensive flooding in many rural and urban locations. Long standing rainfall, lake and river level records were con-sequently broken in several parts of the region with the Yangtze-Huaihe river valleys, particularly badly impacted, with con-sequential economic losses. Floods and landslides also affected parts of Japan with at least one location in Kumamoto province even experiencing a record-breaking 1000 mm of rainfall in just 3 days in early July. The 2020 wet season in South Korea was also exceptionally long, lasting 54 days, compared to their more usual 32.     

Aircraft Observations of the Development of Thermal Internal Boundary Layers and Scaling of the Convective Boundary Layer Over Non-Homogeneous Land Surfaces

This study investigates the convective boundary layer (CBL) that develops over anon-homogeneous surface under different thermal and dynamic conditions. Analysesare based on data obtained from a Russian research aircraft equipped with turbulentsensors during the GAME-Siberia experiment over Yakutsk in Siberia, from April to June 2000.Mesoscale thermal internal boundary layers (MTIBLs) that radically modified CBLdevelopment were observed under unstable atmospheric conditions. It was found thatMTIBLs strongly influenced the vertical and horizontal structures of virtual potentialtemperature, specific humidity and, most notably, the vertical sensible and latent heatfluxes. MTIBLs in the vicinity of the Lena River lowlands were confirmed by clouddistributions in satellite pictures.MTIBLs spread through the entire CBL and radically modify its structure if the CBL isunstable, and strong thermal features on the underlying surface have horizontal scalesexceeding 10 km. MTIBL detection is facilitated through the use of special parameterslinking shear stress and convective motion.The turbulent structure of the CBL with and without MTIBLs was scaled usingthe mosaic or flux aggregate approach. A non-dimensional parameterL_Rau/L_hetero (where L_Rau is Raupach's length and L_hetero is the horizontal scale of the surface heterogeneity)estimates the application limit of similarity and local similarity scaling models forthe mosaic parts over the surface. Normalized vertical profiles of wind speed, airtemperature, turbulent sensible and latent heat fluxes for the mosaic parts withL_RauL_hetero < 1 could be estimated by typical scalingcurves for the homogeneous CBL. Traditional similarity scaling models for the CBLcould not be applied for the mosaic parts with L_Rau/L_hetero > 1.For some horizontally non-homogeneous CBLs, horizontal sensible heat fluxes werecomparable with the vertical fluxes. The largest horizontal sensible heat fluxes occurred at the top of the surface layer and below the top of the CBL.Formerly affiliated to the Frontier Observational Research System for Global ChangeFormerly affiliated to the Frontier Observational Research System for Global Change