Japan’s Nation-Wide Electronic Geotechnical Database Systems by Japanese Geotechnical Society

On October 15, 2010, the Japanese Geotechnical Society (JGS) announced the public release of ‘Nation-wide Electronic Geotechnical Database Systems,’ which provides geotechnical information to the public on the internet. The information the system provides is a collection of ground models at 250 m by 250 m in plan built by using data from various geotechnical information databases. The paper first describes historical development of the geotechnical information databases in Japan, and introduces a 5-year project, ‘Integrated Geophysical and Geological Information Database in Japan,’ led by the National Research Institute for Earth Science and Disaster Prevention (NIED), and participated by the JGS. The paper then presents the JGS’ ‘Nation-wide Electronic Geotechnical Database Systems,’ and describes why such system was proposed and built, followed by the presentation of the examples for possible application of the system.     

Multivariate correlation analysis of suspended-sediment characteristics

Principal component analysis (PCA) was employed to investigate interrelationships among various characteristics of seawater and suspended sediments obtained from surface waters of two Asian marginal seas. On the basis of multivariate correlation analysis for the two marginal seas combined, three important factors were extracted and interpreted: (1) current-energy conditions, (2) the influence of rivers, and (3) biochemical conditions of seawater. A relationship between anisotropic mineral grains and combustible organic matter is suggested by the fact that suspended sediment, containing coarser anisotropic mineral grains, also contains larger amounts of combustible organic matter.     

Observations of flux rope – associated particle bursts with GEOTAIL in the distant tail

Geotail energetic particle, magnetic field data and plasma observations (EPIC, MGF and CPI experiments) have been examined for a number of energetic particle bursts in the distant tail (120Re < |X_GSM| < 130 Re), associated with moving magnetic field structures, following substorm onsets. The features obtained from this data analysis are consistent with the distant magnetotail dynamics determined first by ISEE3 observations and explained in terms of the neutral line model. At the onset of the bursts, before plasma sheet entrance, energetic electrons appear as a field-aligned beam flowing in the tailward direction, followed by anisotro-pic ions. Within the flux rope region, suprathermal ions exhibit a convective anisotropy, which allows determination of the plasma flow velocity, assuming that the anisotropy arises from the Compton-Getting effect. The velocities thus determined in the plasma sheet are estimated to be 200–650 km/s, and compare favourably with the velocities derived from the CPI electron and proton experiment. The estimated length of magnetic field structures varies between 28 and 56 Re and depends on the strength of the westward electrojet intensification. Finally, the three structures reported here show clear magnetic field signatures of flux rope topology. The existence of a strong magnetic field aligned approximately along the Y-axis and centred on the north-to-south excursion of the field, and the bipolar signature in both By and/or Bz components, is consistent with the existence of closed field lines extending from Earth and wrapping around the core of the flux rope structure.     

Chromium solubility in MgSiO3 ilmenite at high pressure

The crystal structure and chemical composition of crystals of (Mg_1?x Cr _x )(Si_1?x Cr _x )O₃ ilmenite (with x = 0.015, 0.023 and 0.038) synthesized in the model system Mg₃Cr₂Si₃O₁₂–Mg₄Si₄O₁₂ at 18–19 GPa and 1,600 °C have been investigated. Chromium was found as substitute for both Mg at the octahedral X site and Si at the octahedral Y site, according to the reaction Mg²⁺ + Si⁴⁺ = 2Cr³⁺. Such substitutions cause a shortening of the <X–O> and a lengthening of the <Y–O> distances with respect to the values typically observed for pure MgSiO₃ ilmenite and eskolaite Cr₂O₃. Although no high Cr contents are considered in the pyrolite model, Cr-bearing ilmenite may be the host for chromium in the Earth’s transition zone. The successful synthesis of ilmenite with high Cr contents and its structural characterization are of key importance because the study of its thermodynamic constants combined with the data on phase relations in the lower-mantle systems can help in the understanding of the seismic velocity and density profiles of the transition zone and the constraining composition and mineralogy of pyrolite in this area of the Earth.     

Prediction method of sand-movement direction in water by geochemical elements

The analysis of sand samples by x-ray fluorescent spectroscopy (XRF) gives the ratio of the geochemical elements to construct the sand samples. The x-ray analysis therefore shows the geochemical characteristics of sand in the sampled area. In this study, sand is sampled on coasts and rivers of the Noto Peninsula to determine the geochemical elements and to show the geological characteristics that occur, especially iron and calcium. The experiments show the effect of rivers and Kotogahama beach on iron and calcium, respectively. Applying the method of ratio matching to the measured data of the geochemical elements, the direction of movement of sand on the coast is determined by considering the correlation matrix and the ratio of geochemical elements between sand samples at two locations. The predominant longshore direction movement of sand offshore in the study area is from south to north. Sand in rivers is not directly transported to adjacent beaches; however, offshore sand is transported to beaches. The estimated direction of movement of sand longshore near coastal structures agrees with observations. The proposed method to predict the direction of movement of sand gives the correct one in comparison with the observed data in rivers.     

Nonlinear behavior of high-damping rubber bearings under horizontal bidirectional loading: full-scale tests and analytical modeling

Horizontal bidirectional loading tests are conducted for real-sized high-damping rubber (HDR) bearings with diameters of 700 mm (HDR700) and 1300 mm (HDR1300). The hysteresis loops of these bearings under bidirectional horizontal loadings are compared with those under unidirectional loadings. The results show that the bearing force measurement in the primary direction of loading increases when there is displacement in the orthogonal direction. Unusually, the maximum restoring force in the orthogonal direction to the primary loading direction occurs near zero displacement. On the basis of the observations of the restoring forces, a rate-independent model is proposed. This model simulates well the test results under both bidirectional loading and unidirectional loading. It can reproduce the irregular restoring forces characteristics around zero displacement as described above. Bidirectional loading induced twist deformation in the HDR bearings that increased local shear strains. This phenomenon results in an early failure as observed in HDR700. The additional shear strain is estimated based on the twist deformation measured by video image analysis. The comparison of the nominal total shear stress demonstrates that the increase of shear stress because of bidirectional loading occurs when the average shear strain is larger than about 200%. The larger the shear strain, the greater the bidirectional effect. It is shown that the nominal total shear stress of average strain of 350% under bidirectional circular loading pattern is approximately the same as the average shear strain of 400% under unidirectional loading. This means that the average shear strain of 350% under a bidirectional circular loading corresponds to a local shear strain of 400%. Copyright © 2012 John Wiley & Sons, Ltd.     

Finite‐element analysis of laminated rubber bearing of building frame under seismic excitation

Finite element analysis is carried out for a building frame supported by laminated rubber bearings to simultaneously investigate global displacement and local stress responses under seismic excitation. The frame members and the rubber bearings are discretized into hexahedral solid elements with more than 3 million degrees of freedom. The material property of rubber is represented by the Ogden model, and the frame is assumed to remain in elastic range. It is shown that the time histories of non‐uniform stress distribution and rocking behavior of the rubber bearings under a frame subjected to seismic excitation can be successfully evaluated, and detailed responses of base and frame can be evaluated through large‐scale finite element analysis. Copyright © 2015 John Wiley & Sons, Ltd.     

大气季节内振荡对印度洋—西太平洋地区热带低压/气旋生成的影响

文中利用EOF分析大气季节内振荡 (MJO)的时空变化的方法 ,研究了 1996年 9月～ 1997年 6月间的MJO活动对生成在印度洋—西太平洋海域的热带低压 /气旋的影响。结果发现 ,除西北太平洋之外 ,发生在其他区域的热带低压 /气旋有半数以上生成在向东移动的MJO的湿位相中。伴随MJO的向东传播 ,热带低压 /气旋平均生成位置也随之向东移动 ,而生成在西北太平洋的热带低压 /气旋分别受到向东和向西传播的MJO影响     

Mesoscale structures of two types of cold-air outbreaks over the East China Sea and the effect of coastal sea surface temperature

Two types of cold-air outbreaks over the Yellow and East China Seas are investigated using a regional mesoscale model. Distinct patterns of surface turbulent heat fluxes and precipitation are identified between the two cases. The sea surface heat flux and frictional velocity are strongly influenced by mesoscale differences between high- and low-resolution datasets of sea surface temperature (SST). The influence of the SST difference on atmospheric water is spread to the downstream area of the outbreak with the phase transition of water. The air mass transformation around 800?hPa over the Kuroshio is partly influenced by the upstream SST difference. In particular, the SST difference near the mouth of the Yanzi River strongly modifies the air mass around Taiwan. Thus, in addition to the Kuroshio front, the mesoscale Chinese coastal SST structure is also important in the air mass transformation over the East China Sea.     

Interannual and synoptic-scale features of two types of cold-air outbreaks over the East China Sea during 1988�C2006

For the 1988?C2006 cold seasons, we investigated the characteristic structures of two types of cold-air outbreaks over the East China Sea: Type N, for which a thick layer of northerly meridional wind was formed during the cold-air outbreak; and Type S, for which an initially thin layer of northerly meridional wind was gradually thickened as the cold-air outbreak developed. The emergence frequencies of Type N and Type S outbreaks are sensitive to winter monsoon intensity at the 500-hectopascal (hPa) level. Type S outbreaks are dominant during strong El Ni?o events, leading to enhanced southerly meridional flow at 500?hPa over the East China Sea. The development of the 500-hPa Pacific High strongly influences the synoptic-scale structures of the two different types of outbreaks over the East China Sea.