Spatial variability of initial 230Th/232Th in modern Porites from the inshore region of the Great Barrier Reef

The main limiting factor in obtaining precise and accurate uranium-series (U-series) ages of corals that lived during the last few hundred years is the ability to constrain and correct for initial thorium-230 (²³⁰Th₀), which is proportionally much higher in younger samples. This is becoming particularly important in palaeoecological research where accurate chronologies, based on the ²³⁰Th chronometer, are required to pinpoint changes in coral community structure and the timing of mortality events in recent time (e.g. since European settlement of northern Australia in the 1850s). In this study, thermal ionisation mass spectrometry (TIMS) U-series dating of 43 samples of known ages collected from living Porites spp. from the far northern, central and southern inshore regions of the Great Barrier Reef (GBR) was performed to spatially constrain initial ²³⁰Th/²³²Th (²³⁰Th/²³²Th₀) variability. In these living Porites corals, the majority of ²³⁰Th/²³²Th₀ values fell within error of the conservative bulk Earth ²³⁰Th/²³²Th atomic value of 4.3 ± 4.3 × 10^?6 (2σ) generally assumed for ²³⁰Th₀ corrections where the primary source is terrestrially derived. However, the results of this study demonstrate that the accuracy of ²³⁰Th ages can be further improved by using locally determined ²³⁰Th/²³²Th₀ values for correction, supporting the conclusion made by Shen et al. (2008) for the Western Pacific. Despite samples being taken from regions adjacent to contrasting levels of land modification, no significant differences were found in ²³⁰Th/²³²Th₀ between regions exposed to varying levels of sediment during river runoff events. Overall, 39 of the total 43 ²³⁰Th/²³²Th₀ atomic values measured in samples from inshore reefs across the entire region show a normal distribution ranging from 3.5 ± 1.1 to 8.1 ± 1.1 × 10^?6, with a weighted mean of 5.76 ± 0.34 × 10^?6 (2σ, MSWD = 8.1). Considering the scatter of the data, the weighted mean value with a more conservative assigned error of 25% (i.e. 5.8 ± 1.4 × 10^?6) that encompasses the full variation of the 39 ²³⁰Th/²³²Th₀ measurements is recommended as a more appropriate value for initial ²³⁰Th corrections for U-series dating of most Porites samples from inshore regions of the GBR. This will result in significant improvement in both the precision and accuracy of the corrected ²³⁰Th ages related to those based on the assumed bulk Earth ²³⁰Th/²³²Th₀ value of 4.3 ± 4.3 × 10^?6. However, several anomalously high ²³⁰Th/²³²Th₀ values reaching up to 28.0 ± 1.6 × 10^?6 occasionally found in some coral annual bands coinciding with El Niño years imply high ²³⁰Th/²³²Th₀ sources and highlight the complexities of understanding ²³⁰Th/²³²Th₀ variability. For U-series dating of young coral samples from such sites where anomalous ²³⁰Th/²³²Th₀ values occur, we suggest replicate dating of multiple growth bands with known age difference to verify age accuracy.     

Influence of the construction process and nonstructural components on the modal properties of a five‐story building

A full‐scale five‐story reinforced concrete building was built and tested on the NEES‐UCSD shake table during the period from May 2011 to May 2012. The purpose of this test program was to study the response of the structure and nonstructural components and systems (NCSs) and their dynamic interaction during seismic base excitation of different intensities. The building specimen was tested first under a base‐isolated condition and then under a fixed‐based condition. As the building was being erected, an accelerometer array was deployed on the specimen to study the evolution of its modal parameters during the construction process and placement of major NCSs. A sequence of dynamic tests, including daily ambient vibration, shock (free vibration) and forced vibration tests (low‐amplitude white noise and seismic base excitations), were performed on the building at different stages of construction. Different state‐of‐the‐art system identification methods, including three output‐only and two input‐output methods, were used to estimate the modal properties of the building. The obtained results allow to investigate in detail the effects of the construction process and NCSs on the dynamic parameters of this building system and to compare the modal properties obtained from different methods, as well as the performance of these methods. Copyright © 2015 John Wiley & Sons, Ltd.     

Shake table tests of stiff,unattached, asymmetric structures

Stiff, unattached structures are highly vulnerable to damage and failure during an earthquake, as evidenced following numerous past events. This class of structures encompasses a wide range of objects and systems such as electrical transformers, radiation shields, office furniture, and marble statues. The vulnerability of these objects is exacerbated when it is highly asymmetric and unattached. Although a number of studies have focused on rigid blocks, few have concentrated on blocks with asymmetric geometries. In an effort to better understand the implications of asymmetries, an extensive shake table testing campaign including more than 150 tests was conducted. These tests incorporate a systematic variation of the mass eccentricities of stiff, unattached structures. The primary modes of rocking, sliding, and twisting as well as interactive modes were recorded for the duration of numerous earthquake motions. The magnitude and direction of response are experimentally correlated with the geometric variations in the various models. These tests indicate that even for symmetric structures with uniaxial shaking, multiple modes and three‐dimensional responses are probable. Furthermore, certain asymmetric geometries exhibited both increased rocking (and overturning) as well as increased sliding when compared with their symmetric counterparts. A final aspect of this study compared the free rocking response of symmetric and asymmetric structures to classical, two‐dimensional rocking analysis. While the theoretical values for the coefficient of restitution yielded a significant overestimation in the simulation (up to ≈90%), reduced coefficients greatly improved the performance of the model. Copyright © 2015 John Wiley & Sons, Ltd.     

'Anywhere you can talk about how you feel is better': Young people's experiences of sexual health messages

Despite increased sexuality education in New Zealand, concern remains about high rates of sexually transmitted infection and unplanned pregnancy among young people. To understand this 'gap', we consider what high school students learn about sexual health, and where they learn it. Narrative evidence reveals the negative, risk-oriented nature of sexual health messages at school and at home. In these power-laden places, little information is imparted about several key issues, including emotions. Students are aware of such absences, and articulate a desire for more open discussions of sexual health and sexuality, as is possible in informal settings occupied by friends.     

Small angle X-ray scattering mapping and kinetics study of sub-critical CO2 sorption by two Australian coals

Time- and position-resolved synchrotron small angle X-ray scattering data were acquired from samples of two Australian coal seams: Bulli seam (Bulli 4, R_o = 1.42%, Sydney Basin), which naturally contains CO₂ and Baralaba seam (R_o = 0.67%, Bowen Basin), a potential candidate for sequestering CO₂. This experimental approach has provided unique, pore-size-specific insights into the kinetics of CO₂ sorption in the micro- and small mesopores (diameter 5 to 175 Å) and the density of the sorbed CO₂ at reservoir-like conditions of temperature and hydrostatic pressure.For both samples, at pressures above 5 bar, the density of CO₂ confined in pores was found to be uniform, with no densification in near-wall regions. In the Bulli 4 sample, CO₂ first flooded the slit pores between polyaromatic sheets. In the pore-size range analysed, the confined CO₂ density was close to that of the free CO₂. The kinetics data are too noisy for reliable quantitative analysis, but qualitatively indicate faster kinetics in mineral-matter-rich regions.In the Baralaba sample, CO₂ preferentially invaded the smallest micropores and the confined CO₂ density was up to five times that of the free CO₂. Faster CO₂ sorption kinetics was found to be correlated with higher mineral matter content but, the mineral-matter-rich regions had lower-density CO₂ confined in their pores. Remarkably, the kinetics was pore-size dependent, being faster for smaller pores.These results suggest that injection into the permeable section of an interbedded coal-clastic sequence could provide a viable combination of reasonable injectivity and high sorption capacity.     

A fluid dynamical flow model for the central peak in the rotation curve of disk galaxies

The rotation curve of the central region in some disk galaxies shows a linear rise, terminating at a peak (primary peak) which is then followed by a deep minimum. The curve then again rises to another peak at more or less half-way across the galactic radius. This latter peak is considered as the peak of the rotation curve in all large-scale analysis of galactic structure. The primary peak is usually ignored for the purpose. In this work an attempt has been made to look at the primary peak as the manifestation of the post-explosion flow pattern of gas in the deep central region of galaxies. Solving hydrodynamical equations of motion, a flow model has been derived which imitates very closely the actually observed linear rotational velocity, followed by the falling branch of the curve to minimum. The theoretical flow model has been compared with observed results for nine galaxies. The agreement obtained is extremely encouraging. The distance of the primary peak from the galactic centre has been shown to be correlated with the angular velocity in the linear part of the rotation curve. Here also, agreement is very good between theoretical and observed results. It is concluded that the distance of the primary peak from the centre not only speaks of the time that has elapsed since the explosion occurred in the nucleus, it also speaks of the potential capability of the nucleus of the galaxy for repeating explosions through some efficient process of mass replenishment at the core.     

Controls on erosion patterns and sediment transport in a monsoonal,tectonically quiescent drainage,Song Gianh,central Vietnam

The Song Gianh is a small‐sized (~3500 km²), monsoon‐dominated river in northern central Vietnam that can be used to understand how topography and climate control continental erosion. We present major element concentrations, together with Sr and Nd isotopic compositions, of siliciclastic bulk sediments to define sediment provenance and chemical weathering intensity. These data indicate preferential sediment generation in the steep, wetter upper reaches of the Song Gianh. In contrast, detrital zircon U‐Pb ages argue for significant flux from the drier, northern Rao Tro tributary. We propose that this mismatch represents disequilibrium in basin erosion patterns driven by changing monsoon strength and the onset of agriculture across the region. Detrital apatite fission track and ¹⁰Be data from modern sediment support slowing of regional bedrock exhumation rates through the Cenozoic. If the Song Gianh is representative of coastal Vietnam then the coastal mountains may have produced around 132 000–158 000 km³ of the sediment now preserved in the Song Hong‐Yinggehai Basin (17–21% of the total), the primary depocenter of the Red River. This flux does not negate the need for drainage capture in the Red River to explain the large Cenozoic sediment volumes in that basin but does partly account for the discrepancy between preserved and eroded sediment volumes. OSL ages from terraces cluster in the Early Holocene (7.4–8.5 ka), Pre‐Industrial (550–320 year BP) and in the recent past (ca. 150 year BP). The older terraces reflect high sediment production driven by a strong monsoon, whereas the younger are the product of anthropogenic impact on the landscape caused by farming. Modern river sediment is consistently more weathered than terrace sediment consistent with reworking of old weathered soils by agricultural disruption.     

Multi-proxy record of postglacial environmental change, south-central Melville Island, Northwest Territories, Canada

A sediment core from Lake BC01 (75°10.945′N, 111°55.181′W, 225 m asl) on south-central Melville Island, NWT, Canada, provides the first continuous postglacial environmental record for the region. Fossil pollen results indicate that the postglacial landscape was dominated by Poaceae and Salix, typical of a High Arctic plant community, whereas the Arctic herb Oxyria underwent a gradual increase during the late Holocene. Pollen-based climate reconstructions suggests the presence of a cold and dry period ~12,000 cal yr BP, possibly representing the Younger Dryas, followed by warmer and wetter conditions from 11,000 to 5000 cal yr BP, likely reflective of the Holocene Thermal Maximum. The climate then underwent a gradual cooling and drying from 5000 cal yr BP to the present, suggesting a late Holocene neoglacial cooling. Diatom preservation was poor prior to 5000 cal yr BP, when conditions were warmest, suggesting that diatom dissolution may in part be climatically controlled. Diatom concentrations were highest ~4500 cal yr BP but then decreased substantially by 3500 cal yr BP and remained low before recovering slightly in the 20th century. An abrupt warming occurred during the past 70 yr at the site, although the magnitude of this warming did not exceed that of the early Holocene.