Size distribution and roundness of clasts within pseudotachylytes of the Gangavalli Shear Zone,Salem, Tamil Nadu: An insight into its origin and tectonic significance

Gangavalli (Brittle) Shear Zone (Fault) near Attur, Tamil Nadu exposes nearly 50 km long and 1–3 km wide NNE–SSW trending linear belt of cataclasites and pseudotachylyte produced on charnockites of the Southern Granulite Terrane. Pseudotachylytes, as well as the country rock, bear the evidence of conjugate strike slip shearing along NNE–SSW and NW–SE directions, suggesting an N–S compression. The Gangavalli Shear Zone represents the NNE–SSW fault of the conjugate system along which a right lateral shear has produced seismic slip motion giving rise to cataclasites and pseudotachylytes. Pseudotachylytes occur as veins of varying width extending from hairline fracture fills to tens of meters in length. They carry quartz as well as feldspar clasts with sizes of few mm in diameter; the clast sizes show a modified Power law distribution with finer ones (<1000 \({\upmu }\)m\(^{2})\) deviating from linearity. The shape of the clasts shows a high degree of roundness (>0.4) due to thermal decrepitation. In a large instance, devitrification has occurred producing albitic microlites that suggest the temperature of the pseudotachylyte melt was >1000\(^{\circ }\hbox {C}\). Thus, pseudotachylyte veins act as a proxy to understand the genetic process involved in the evolution of the shear zone and its tectonic settings.     

Geospatial Technologies for National Geomorphology and Lineament Mapping Project – A Case Study of Goa State

A three level classification system, based on the genesis of landforms, was used to map the geomorphology of the Goa state. The first level corresponds to the process that was responsible for landform generation, the second level or the intermediate level was assigned based on the morphography, and the third level corresponds to the individual landforms units identified based on the morphostructure. The mapping was carried out using IRS-P6 LISS-III (23.5 m) satellite image as the primary data source. Ancillary data such as geological map, topographic map, digital elevation model (DEM), field data collected by global positioning system (GPS) and web portals for image visualisation, were also used for the mapping purpose. A new software designed for mapping landforms based on the genesis, was used in this study to create a seamless geomorphology and lineament database of the Goa state in a GIS environment. A total of 58 landforms within six types of genetic classes were mapped in this area. Similarly, structural and geomorphic lineaments were also delineated using the satellite data. The database created has multi-purpose usability such as environmental studies, mining activity assessment, coastal zone management and wasteland development, since the classification system used is focused on processes, not theme specific.     

Noise reduction methods in the analysis of near infrared lunar occultation light curves for high angular resolution measurements

A lunar occultation （LO） technique in the near-infrared （NIR） provides angular resolution down to milliarcseconds for an occulted source, even with ground- based 1 m class telescopes. LO observations are limited to brighter objects because they require a high signal-to-noise ratio （S/N ~40） for proper extraction of angular diameter values. Hence, methods to improve the S/N ratio by reducing noise using Fourier and wavelet transforms have been explored in this study. A sample of 54 NIR LO light curves observed with the IR camera at Mt Abu Observatory has been used. It is seen that both Fourier and wavelet methods have shown an improvement in S/N compared to the original data. However, the application of wavelet transforms causes a slight smoothing of the fringes and results in a higher value for angular diameter. Fourier transforms which reduce discrete noise frequencies do not distort the fringe. The Fourier transform method seems to be effective in improving the S/N, as well as improving the model fit, particularly in the fainter regime of our sample. These methods also provide a better model fit for brighter sources in some cases, though there may not be a significant imorovement in S/N.     

Geospatial landslide inventory of India—an insight into occurrence and exposure on a national scale

Landslides - India ranks first in the world in terms of fatal landslides. Large vulnerable area (0.42 million km2), high population density and monsoon rainfall make India’s landslide...     

Spatial characteristics of landslides triggered by the 2015 M<Subscript>w</Subscript> 7.8 (Gorkha) and M<Subscript>w</Subscript> 7.3 (Dolakha) earthquakes in Nepal

High magnitude earthquakes trigger numerous landslides and their occurrences are mainly controlled by terrain parameters. We created an inventory of 15,551 landslides with a total area of 90.2 km² triggered by the 2015 M_w 7.8 (Gorkha) and M_w 7.3 (Dolakha) earthquakes in Nepal, through interpretation of very high resolution satellite images (e.g. WorldView, Pleiades, Cartosat-1 and 2, Resourcesat-2). Our spatial analysis of landslide occurrences with ground acceleration, slope, lithology and surface defomation indicated ubiquitous control of steep slope on landslides with ground acceleration as the trigger. Spatial distribution of landslides shows increasing frequency away from the Gorkha earthquake epicentre up to 130 km towards east, dropping sharply thereafter, which is an abnormal phenomenon of coseismic landslides. Landslides are laterally concentrated in three zones which matches well with the seismic rupture evolution of Gorkha earthquake, as reported through teleseismic measurements.     

Potassium and Residue Management Options to Enhance Productivity and Soil Quality in Zero Till Maize–Wheat Rotation

Crop residue burning and imbalanced use of chemical fertilizers in intensive cereal–cereal rotations are present ecological threats in any agro‐ecosystem of the world. Therefore, identification of best suitable agricultural practices can be a feasible option. The present experiment was initiated in 2013 and consisted of four residue levels (0, 2, 4, and 6 Mg ha^?1) and five potassium (K) levels (0, 50, 100, 150% recommended dose of K and 50%RDK+K solubilizing bacteria, KSB). Crop residue (CR) and K management significantly improve crop and soil quality associated parameters. Among the treatments, maximum increase in crop growth, physiological parameters, grain yield, quality aspects, and water productivity are recorded with the application of 4–6 Mg ha^?1 CR. Application of 50%RDK+KSB also significantly increases crop and soil related parameters. Soil quality indicators (bulk density, pH, electrical conductivity, and available micronutrients) do not vary significantly with CR and K management. Change in soil organic carbon status, soil enzymes, and potassium‐solubilizing bacterial count are significantly increased with 4–6 Mg ha^?1 CR and application of 50%RDK+KSB, and this is in accordance with correlation study carried out. Therefore, it is concluded that CR retention (4–6 Mg ha^?1) and reduction of inorganic K fertilizer by 50% and inoculation of KSB enhance the soil quality indicators and thereby improve crop growth, physiological parameters, grain yield, and quality aspects along with water productivity under zero till maize–wheat rotation.     

Erodibility of fine soil from the composite river bank of Brahmaputra in India

The erosion of a composite river bank critically depends on the erodibility of its fine soils, as the fine soil has higher resistance against erosion. Therefore, for the estimation of the bank erosion in the case of a composite river bank, it is important to determine the critical shear stress and erodibility coefficients of the bank soil and their spatial distribution. In the present study, erodibility parameters of the river bank of Brahmaputra in India have been estimated through 58 in situ submerged jet tests. The significance of spatial and layer‐wise distribution of the erodibility parameters was tested through analysis of variance (ANOVA). Results indicate that the spatial variation of erodibility parameters is highly significant, but layer‐wise variations of the erodibility parameters are not significant. Therefore, the erodibility of the riverbank depends on the particular location, whereas layer‐wise average erodibility parameters can be lumped for the estimation of the bank erosion for the specific site. Using the measured erodibility parameters, yearly river bank erosions at the study locations were computed and found to fall within the reported range of the bank erosion in the Brahmaputra River. Copyright © 2010 John Wiley & Sons, Ltd.     

On some transonic aspects of general relativistic spherical accretion on to Schwarzschild black holes

The equations governing general relativistic, spherically symmetric, hydrodynamic accretion of polytropic fluid on to black holes are solved in the Schwarzschild metric to investigate some of the transonic properties of the flow. Only stationary solutions are discussed. For such accretion, it has been shown that real physical sonic points may form even for flow with   γ <4/3  or   γ >5/3  . The behaviour of some flow variables in the close vicinity of the event horizon is studied as a function of specific energy and the polytropic index of the flow.     

Mapping of hydrothermally altered zones in Aravalli Supergroup of rocks around Dungarpur and Udaipur,India, using Landsat-8 OLI and spectroscopy

We explored the utilization of Landsat-8 Operational Land Imager (OLI) data for mapping of hydrothermal alteration zones. The region in and around the cities of Dungarpur and Udaipur of Rajasthan state in India was selected for this study. The rock types of Dungarpur and Udaipur are serpentinites, talc-carbonate, talc-schist, and quartzite of the Aravalli Supergroup. Hydrothermally altered zones and resultant hydrous minerals play an important role in the genesis of these rocks. We aimed to identify possible locations of hydrothermally altered zones in regional context around Dungarpur and Udaipur using Landsat-8 OLI data. False-color composite maps and band ratios were prepared from Landsat-8 bands. Band ratios such as band 6/band 7 (short-wave infrared 1 (SWIR1)/short wave infrared 2 (SWIR2)), band 4/band 3 (red/green), and band 5/band 6 (near infrared (NIR)/SWIR1) and visual interpretation techniques were used to identify the hydrothermally altered zones. Spectroscopic analyses of field rock samples were done to validate the hydrothermal alteration zones delineated from the analysis of Landsat-8 data. We present the combined results of Landsat-8 and field spectroradiometer analysis which brings out the hydrothermal alteration zones associated with hydrous minerals (antigorite, lizardite, montmorillonite, vermiculite, talc, and saponite). The study demonstrates the utility Landsat-8 OLI (with field spectroradiometer data) in the mapping of hydrothermally altered zones as a key in understanding geological processes.