Effects of environmental stresses on the responses of mangrove plants to spent lubricating oil

The influence of different environmental stresses, including salinity (5-35‰), tidal cycle (6/6, 12/12 and 24/24 h of high/low tidal regimes) and nutrient addition (1-6 times background nitrogen and phosphorus content) on Bruguiera gymnorrhiza and Aegiceras corniculatum grown in sediment contaminated with spent lubricating oil (7.5 L m(-2)) were investigated. The oil-treated 1-year-old mangrove seedlings subject to low (5‰) and high (35‰) salinity had significantly more reduction in growth, more release of superoxide radical (O2·-) and higher activity of superoxide dismutase (SOD) than those subject to moderate salinity (15‰). Extended flooding (24/24 h of high/low tidal regime) enhanced O2·- release and malondialdehyde (MDA) content in both oil-treated species but had little negative effects on biomass production (P>0.05) except the stem of A. corniculatum (P=0.012). The addition of nutrients had no beneficial or even posed harmful effects on the growth and cellular responses of the oil-treated seedlings.     

Multiple provenance of detrital zircons from the Permian–Triassic boundary in the Bükk Mts., Hungary

Detailed zircon analyses were carried out on samples from the Bálvány North section, which contains the Permian–Triassic boundary. A fine-grained sandstone bed within the “boundary shale” contains a significant amount of zircon crystals. Pupin morphological, scanning electron microscopy [secondary electron, back-scattered electron, cathodoluminescence (CL)] and laser ablation inductively coupled mass spectrometry (LA-ICP-MS) investigations were done in selected single grains to combine morphological information with radiometric ages, and infer the provenance of zircons. Three populations are distinguished on the basis of Pupin morphology. Their centres of gravity are S17, S2 and P1. The LA-ICP-MS radiometric ages reveal three main age groups and a smaller one, apart from a few scattered old ages. The largest group, comprising ca. 50% of the measured grains, has an age of 470–440 Ma. The two other main groups, which together represent ca. 25% of the measured grains, are around 280 and 600 Ma. The 280 Ma group contains slightly more grains than the 600 Ma group. A small group has an age of 370–340 Ma. In addition, there are some older grains with ages of 850, 969, 1,050 and 2,150 Ma. Based on the zircon morphology no clear separation of the different age groups could be made. Both the 280 Ma and the 470–440 Ma age groups tend to show zircon crystals derived from three types of sources: crustal granites, calc-alkaline granitoids and alkali granites and/or their volcanic equivalents. Zircons in the 450 Ma group have a magmatic rim around their altered, relict core, as revealed by CL images. Post-magmatic processes also affected the rim. The age of the core is possibly reset during the formation of the magmatic rim. This suggestion is supported by the LA-ICP-MS data, because no difference was seen between the core and the rim. The different roundness of the zircons, the well-sorted crystals and the at least five different source rocks indicate previous concentration of the grains, before their transportation into the “boundary shale”. Austroalpine and Southern Alpine rocks could be the sources of the zircon crystals, which fit well into the paleogeographical model of the area, which suggests that the Bükk Mts. was located in the foreground of the Alpine units.     

Chandra monitoring of the candidate anomalous X-ray pulsar AX J1845.0-0258

The population of clearly identified anomalous X-ray pulsars has recently grown to seven, however, one candidate anomalous X-ray pulsar (AXP) still eludes re-confirmation. Here, we present a set of seven Chandra ACIS-S observations of the transient pulsar AX J1845.0-0258, obtained during 2003. Our observations reveal a faint X-ray point source within the ASCA error circle of AX J1845.0-0258’s discovery, which we designate CXOU J184454.6-025653 and tentatively identify as the quiescent AXP. Its spectrum is well described by an absorbed single-component blackbody (kT∼2.0 keV) or power law (Γ∼1.0) that is steady in flux on timescales of at least months, but fainter than AX J1845.0-0258 was during its 1993 period of X-ray enhancement by at least a factor of 13. Compared to the outburst spectrum of AX J1845.0-0258, CXOU J184454.6-025653 is considerably harder: if truly the counterpart, then its spectral behavior is contrary to that seen in the established transient AXP XTE J1810-197, which softened from kT∼0.67 keV to ∼0.18 keV in quiescence. This unexpected result prompts us to examine the possibility that we have observed an unrelated source, and we discuss the implications for AXPs, and magnetars in general.      

海南海莲红树林土壤CH4的产生及其某些影响因素

全球CH₄预算的估算表明,湿地是大气CH₄最大的生物排放源[1].旨在估算全球大气CH₄湿地源强的工作大多集中在内陆淡水环境,因为在此环境的CH₄通量较大[2].国外对海岸盐沼的CH₄排放也有一些报道,发现其通量变化范围较大,并进而研究了温度、土壤湿度、盐度以及土壤有机碳含量等因素对CH₄排放的影响[3].     

Concentrations of PCBs in coastal mangrove sediments of Hong Kong

The concentrations of polychlorinated biphenyls (PCBs) in surface sediments of ten mangrove sites in Hong Kong were determined by Congener-specific and Arcolor methods. Spatial variations were found between mangrove sites and within the same site, indicating that the sediment samples were heterogeneous and total PCBs concentrations in mangrove sediments should be normalised to compensate for natural variability and for identifying serious anthropogenic contamination. In addition to total organic carbon, Al, Fe and Mn were possible normalisers. Based on PCB/normaliser ratio and 95% prediction limits of scatter plots between total PCB and normaliser, all mangrove sites were not seriously contaminated by human activities. The estimated total PCBs concentrations (quantified by Congener-specific method) for most sediment ranged from 0.5 to 5.8 ng g(-1) (dry weight, n = 92). However, very high concentrations of PCB were found in sub-samples from Yi O, Tolo Pond and Lai Chi Wo, suggesting that these samples represented the PCB contaminated "hot spots".     

Fate of polycyclic aromatic hydrocarbon (PAH) contamination in a mangrove swamp in Hong Kong following an oil spill

The fate of polycyclic aromatic hydrocarbon (PAH) contamination in a mangrove swamp (Yi O) in Hong Kong after an oil spill accident was investigated. The concentrations and profiles of PAHs in surface sediments collected from five quadrats (each of 10 m×10 m) covering different degrees of oil contamination and the most contaminated mangrove leaves were examined in December 2000 (30 days after the accident) and March 2001 (126 days later). The concentrations of total PAHs in surface sediments ranged from 138 to 2135 ng g⁻¹, and PAHs concentrations decreased with time. In the most contaminated sediments, total PAHs dropped from 2135 (30 days) to 1196 ng g⁻¹ (120 days), and the decrease was smaller in less contaminated sediments. The percentage reduction in sediment PAHs over three months (44%) was less significant than that in contaminated leaves (85%), indicating PAH in or on leaves disappeared more rapidly. The PAH profiles were very similar in sediments collected from quadrats Q1 and Q2 with benzo[a]anthracene and pyrene being the most abundant PAH compounds, but were different in the other three quadrats. The proportion of the light molecular weight PAHs to total PAHs increased after three months, especially phenanthrene. Results suggest that physical and photo-chemical weathering (tidal washing and photo-oxidation) of crude oil in surface sediments and on plant leaves were important processes in the first few months after the oil spill. The PAH contamination in Yi O swamp came from both petrogenic and pyrolytic sources. The petrogenic characteristic in the most contaminated sediment was confirmed with high values of phenanthrene to anthracene ratio (>10) and low values of fluoranthene to pyrene ratio (0.3–0.4).     

Multi‐level design model and genetic algorithm for structural control system optimization

The integrated optimum problem of structures subjected to strong earthquakes and wind excitations, optimizing the number of actuators, the configuration of actuators and the control algorithms simultaneously, is studied. Two control algorithms, optimal control and acceleration feedback control, are used as the control algorithms. A multi‐level optimization model is proposed with respect to the solution procedure of the optimum problem. The characteristics of the model are analysed, and the formulation of each suboptimization problem at each level is presented. To solve the multi‐level optimization problem, a multi‐level genetic algorithm (MLGA) is proposed. The proposed model and MLGA are used to solve two multi‐level optimization problems in which the optimization of the number of actuators, the positions of actuators and the control algorithm are considered in different levels. In problem 1, an example structure is excited by strong wind, and in problem 2, an example structure is subjected to strong earthquake excitation. Copyright © 2001 John Wiley & Sons, Ltd.     

Raman study of radiation-damaged zircon under hydrostatic compression

Pressure-induced changes of Raman band parameters of four natural, gem-quality zircon samples with different degrees of self-irradiation damage, and synthetic ZrSiO₄ without radiation damage, have been studied under hydrostatic compression in a diamond anvil cell up to ~10 GPa. Radiation-damaged zircon shows similar up-shifts of internal SiO₄ stretching modes at elevated pressures as non-damaged ZrSiO₄. Only minor changes of band-widths were observed in all cases. This makes it possible to estimate the degree of radiation damage from the width of the ν₃(SiO₄) band of zircon inclusions in situ, almost independent from potential “fossilized pressures” or compressive strain acting on the inclusions. An application is the non-destructive analysis of gemstones such as corundum or spinel: broadened Raman bands are a reliable indicator of self-irradiation damage in zircon inclusions, whose presence allows one to exclude artificial color enhancement by high-temperature treatment of the specimen.     

Airborne LiDAR point cloud in mapping of fluvial forms: a case study of a Hungarian floodplain

The aim of this paper was to analyze the ground and low vegetation points of a Light Detection and Ranging (LiDAR) point cloud from the aspect of the generated digital terrain model (DTM). We determined the height difference between the surveyed surface and the DTM and the level of interspersion of ground and low vegetation points in a floodplain. Finally, we performed a supervised classification with topographic (elevation, slope and aspect) variables and an Normalized Difference Vegetation Index (NDVI) layer to identify swales and point bars as floodplain forms. Cross sections of field surveys provided reference data to express the magnitude of the bias on the DTM caused by the vegetation, and we proved that the bias can reach the 60% of the relative height and depth of the floodplain forms (mean error was 0.15 ± 0.12 m). A landscape metric, the Aggregation Index, provided an appropriate tool to analyze and quantify the interspersion of the ground and vegetation points: indicating a high level of interspersion of the classified points, i.e. proved that vegetation points where the last echoes reflected from the vegetation became ground points. Floodplain classification performed best with the common use of DTM, slope, aspect and NDVI coverages, with 71% overall accuracy.