A new, automatic hydrothermal fluid sampler using a shape-memory alloy

A new hydrothermal fluid sampler has been developed to provide more maneuverability in underwater operation. The sampler characteristically employs a shape-memory alloy, which senses high temperature and actuates the suction mechanism. A shape-memory alloy is also used to switch the intake valve of the sampler, the intention being to avoid missampling when the inlet is in low temperature water. Prototype samplers were designed to collect the fluids hotter than 80°C. Test sampling was performed at hydrothermal vents (1372–1374 m deep) in the submarine volcano, Suiyo Seamount, Izu-Bonin Arc, northwestern Pacific. Observed fluid temperature was between 138 and 298°C, while the ambient seawater temperature was 3.1°C. Each prototype collected about 100 ml fluid as designed. The magnesium concentration in the samples indicated a seawater content of 47.5–90.8%, which indicates the entrainment of ambient seawater. Microscopic observatinn revealed the occurrence of microorganisms in the sample fluids at a population density of 10⁵ to 10⁶ cells ml⁻¹, which is 2–3 orders of magnitude higher than those in seawater at that depth. The use of the newly developed fluid sampler will greatly facilitate the collection of vent-associated microorganisms, which are of potential biological and biotechnological interest.     

Variations in snowmelt energy and energy balance characteristics with larch forest density on Mt Iwate,Japan: observations and energy balance analyses

The variation in snowmelt energy and energy components were evaluated with respect to forest density. Surface snowmelt rates, surface evaporation from snow cover and meteorological elements were measured in the open and under sparse (411 trees/ha) and dense (1433 trees/ha) larch canopies. The surface snowmelt rate decreased as the forest density increased. Based on the observations and energy balance analyses, we concluded the following. (1) Albedo decreased while the bulk coefficient for latent heat increased with forest density. (2) The duration of snowmelt increased with forest density because the energy for nocturnal cooling of the snow cover decreased. (3) When comparing the open and forested sites, the changes in snowmelt energy with forest density were caused by sensible heat flux. However, the contribution of net radiation was highest in the forested sites. Therefore, the effects of forest cover on the snowmelt energy were different when comparing both the open and forested sites and the sparse and densely forested sites. (4) The ratio of net radiation to snowmelt energy increased with forest density; although both snowmelt energy and net radiation decreased with increased forest density, the snowmelt energy decreased more rapidly. Sensible heat also decreased as forest density increased. Both albedo and downward long‐wave radiation influenced net radiation. Copyright © 1999 John Wiley & Sons, Ltd.     

Seismic performance evaluation of steel arch bridges against major earthquakes. Part 1: dynamic analysis approach

In this study the inelastic behavior of steel arch bridges subjected to strong ground motions from major earthquakes is investigated by dynamic analyses of a typical steel arch bridge using a three‐dimensional (3D) analytical model, since checking seismic performance against severe earthquakes is not usually performed when designing such kinds of bridge. The bridge considered is an upper‐deck steel arch bridge having a reinforced concrete (RC) deck, steel I‐section girders and steel arch ribs. The input ground motions are accelerograms which are modified ground motions based on the records from the 1995 Hyogoken‐Nanbu earthquake. Both the longitudinal and transverse dynamic characteristics of the bridge are studied by investigation of time‐history responses of the main parameters. It is found that seismic responses are small when subjected to the longitudinal excitation, but significantly large under the transverse ground motion due to plasticization formed in some segments such as arch rib ends and side pier bases where axial force levels are very high. Finally, a seismic performance evaluation method based on the response strain index is proposed for such steel bridge structures. Copyright © 2004 John Wiley & Sons, Ltd.     

Crustal structure in and around the region of the 1995 Kobe Earthquake deduced from a wide-angle and refraction seismic exploration

Abstract The 1995 Kobe (Hyogo-ken Nanbu) earthquake (M_JMA 7.2, M_w 6.9) occurred on Jan. 17, 1995, at a depth of 17 km, beneath the areas of southern part of Hyogo prefecture and Awaji Island. To investigate P-wave velocity distribution and seismological characteristics in the aftershock area of this great earthquake, a wide-angle and refraction seismic exploration was carried out by the Research Group for Explosion Seismology (RGES) . The profile including 6 shot points and 205 observations was 135 km in length, extending from Keihoku, Northern Kyoto prefecture, through Kobe, to Seidan on Awaji Island. The charge of each shot was 350–700 kg. The P-wave velocity structure model showed a complicated sedimentary layer which is shallower than 2.5 km, a 2.5 km-thick basement layer whose velocity is 5.5 km/s, overlying the crystalline upper crust, and the boundary between the upper and lower crust.
Almost all aftershock hypocenters were located in the upper crust. However, the structure model suggests that the hypocenters of the main shock and some aftershock clusters were situated deeper than the boundary between the upper and lower crust. We found that the P-velocity in the upper crust beneath the northern part of Awaji Island is 5.64 km/s which is 3% lower than that of the surrounding area. The low-velocity zone coincides with the region where the high stress moment release was observed.     

Dynamical model of prominence formation and oscillation,I

We investigate a dynamical model of prominence formation in a current sheet at the boundary between two regions of opposite magnetic polarity. Coupled nonlinear equations describing the temporal compression and condensation of plasma in the current sheet are set up as a natural extension of the usual equations for current sheet collapse (Imshennik and Syrovatskii, 1967). It is shown that under certain conditions the current sheet undergoes a nonlinear oscillation during the compression. The thermal instability with cooling is driven by a density enhancement produced during the current sheet formation stage.     

Coronal Mass Ejections Observed at the Total Solar Eclipse on 13 November 2012

White-light observations of the total solar eclipse on 13 November 2012 were made at two sites, where the totality occurred 35 min apart. The structure of the corona from the solar limb to a couple of solar radii was observed with a wide dynamic range and a high signal-to-noise ratio. An ongoing coronal mass ejection (CME) and a pre-CME loop structure just before the eruption were observed in the height range between 1?–?2 R_⊙. The source region of CMEs was revealed to be in this height range, where the material and the magnetic field of CMEs were located before the eruption. This height range includes the gap between the extreme ultraviolet observations of the low corona and the spaceborne white-light observations of the high corona, but the eclipse observation shows that this height range is essential for the study of CME initiation. The eclipse observation is basically just a snapshot of CMEs, but it indicates the importance of a continuous coverage of CME observations in this height range in the future.     

Sulfur isotope study of Quaternary volcanic rocks from the Japanese Islands Arc

The sulfide and sulfate contents and their δ³⁴S values were determined in Quaternary volcanic rocks from the Japanese Islands Arc. The total sulfur contents are much lower (less than 40 ppm) and the δ³⁴S values are higher (+4.4 ± 2.1) than those of ocean-floor basalts (800 ± 100 ppm and +0.8 ± 0.5, respectively; Moore and Fabbi, 1971; Sakaiet al., 1982). Lateral variations of both sulfur content and δ³⁴S values were observed in the four volcanic belts in Japan. In the Northeast Japan belt, the sulfur content (30 ± 10 ppm) of the rocks in the inner zone (the Japan Sea side) is 3 to 5 times that in the outer zone (the Pacific side), although the δ³⁴S values of the two zones are almost the same (+4.3 ± 1.0). The δ³⁴S values for the two belts in West Japan are on the average 2%. higher than those of East Japan.This study suggests that the primary magmas that formed the island arc volcanic rocks are initially depleted in sulfur (<120 ppm) and enriched in ³⁴S ($\text{δ}{}^{34}\text{S: +5 ～ +7}$) compared to ocean-floor tholeiitic basalts which formed at mantle under oceanic region. This indicates that the upper-mantle is heterogeneous in sulfur content and isotope composition.