Evolution of Mount Fuji,Japan: Inference from drilling into the subaerial oldest volcano,pre‐Komitake

A buried, old volcanic body (pre‐Komitake Volcano) was discovered during drilling into the northeastern flank of Mount Fuji. The pre‐Komitake Volcano is characterized by hornblende‐bearing andesite and dacite, in contrast to the porphyritic basaltic rocks of Komitake Volcano and to the olivine‐bearing basaltic rocks of Fuji Volcano. K‐Ar age determinations and geological analysis of drilling cores suggest that the pre‐Komitake Volcano began with effusion of basaltic lava flows around 260 ka and ended with explosive eruptions of basaltic andesite and dacite magma around 160 ka. After deposition of a thin soil layer on the pre‐Komitake volcanic rocks, successive effusions of lava flows occurred at Komitake Volcano until 100 ka. Explosive eruptions of Fuji Volcano followed shortly after the activity of Komitake. The long‐term eruption rate of about 3 km³/ka or more for Fuji Volcano is much higher than that estimated for pre‐Komitake and Komitake. The chemical variation within Fuji Volcano, represented by an increase in incompatible elements at nearly constant SiO₂, differs from that within pre‐Komitake and other volcanoes in the northern Izu‐Bonin arc, where incompatible elements increase with increasing SiO₂. These changes in the volcanism in Mount Fuji may have occurred due to a change in regional tectonics around 150 ka, although this remains unproven.     

Distribution of local Cs anomalies on the seafloor near the Fukushima Dai-ichi Nuclear Power Plant

An estimated 3.5 ± 0.7 × 10¹⁵ Bq of ¹³⁷Cs is thought to have been discharged into the ocean following the melt down at Fukushima Dai-ichi Nuclear Power Plant (F1NPP). While efforts have been made to monitor seafloor radiation levels, the sampling techniques used cannot capture the continuous distribution of radionuclides. In this work, we apply in situ measurement techniques using a towed gamma ray spectrometer to map the continuous distribution of ¹³⁷Cs on the seafloor within 20 km of the F1NPP. The results reveal the existence of local ¹³⁷Cs anomalies, with levels of ¹³⁷Cs an order of magnitude higher than the surrounding seafloors. The sizes of the anomalies mapped in this work range from a few meters to a few hundreds of meters in length, and it is demonstrated that the distribution of these anomalies is strongly influenced by meter scale features of the terrain.     

Geology of the Hida Gaien Belt in the upper Kuzuryu‐gawa River Area in Ono City,Fukui Prefecture,Central Japan

Geological, paleontological, and geochronological studies of the Hida Gaien Belt were carried out in the upper Kuzuryu‐gawa River area, northern central Japan. The Hida Gaien Belt lies between the Hida and Mino belts of Southwest Japan and is one of the most complex geologic belts in Japan. The geology of the following units in the study area, mostly bounded by longitudinal, high‐angle faults, was particularly reexamined and described: the Ise metamorphic rocks, the Fujikuradani, Tomedoro, Oguradani, Motodo, Ootani, and Konogidani Formations, and the Tetori Group. Among them, the Tomedoro and Konogidani Formations are both composed mainly of greenstone, and were conventionally coupled together as ‘the Tomedoro schalstein member’ or ‘the Konogidani Formation’. However, the conformable relationship between the Tomedoro Formation and overlying Middle Permian Oguradani Formation, and the K–Ar and ⁴⁰Ar–³⁹Ar ages of 75–69 Ma (Late Cretaceous) from the basalt lava of the Konogidani Formation reveal that they are separate formations with different ages. The Oguradani Formation, consisting of limestone, shale, and sandstone with Middle Permian Boreal‐Tethyan mixed brachiopod fauna, is correlated with the Moribu Formation in the Takayama area of the Hida Gaien Belt, and with the Middle Formation of the Maizuru Group in the Maizuru Belt. The Tomedoro Formation below the Oguradani Formation, in turn, is correlated with the Lower Formation of the Maizuru Belt. The new Late Cretaceous age data from the Konogidani Formation and presence of latest Cretaceous, post‐tectonic volcanic rocks in the study area finally indicate that the fault‐bound structure of the Hida Gaien Belt between the Hida and Mino belts was formed in a very short period in Late Cretaceous age.     

The origin of high δ<Superscript>18</Superscript>O zircons: marbles,megacrysts, and metamorphism

The oxygen isotope ratios (δ¹⁸O) of most igneous zircons range from 5 to 8‰, with 99% of published values from 1345 rocks below 10‰. Metamorphic zircons from quartzite, metapelite, metabasite, and eclogite record δ¹⁸O values from 5 to 17‰, with 99% below 15‰. However, zircons with anomalously high δ¹⁸O, up to 23‰, have been reported in detrital suites; source rocks for these unusual zircons have not been identified. We report data for zircons from Sri Lanka and Myanmar that constrain a metamorphic petrogenesis for anomalously high δ¹⁸O in zircon. A suite of 28 large detrital zircon megacrysts from Mogok (Myanmar) analyzed by laser fluorination yields δ¹⁸O from 9.4 to 25.5‰. The U–Pb standard, CZ3, a large detrital zircon megacryst from Sri Lanka, yields δ¹⁸O = 15.4 ± 0.1‰ (2 SE) by ion microprobe. A euhedral unzoned zircon in a thin section of Sri Lanka granulite facies calcite marble yields δ¹⁸O = 19.4‰ by ion microprobe and confirms a metamorphic petrogenesis of zircon in marble. Small oxygen isotope fractionations between zircon and most minerals require a high δ¹⁸O source for the high δ¹⁸O zircons. Predicted equilibrium values of Δ¹⁸O(calcite-zircon) = 2–3‰ from 800 to 600°C show that metamorphic zircon crystallizing in a high δ¹⁸O marble will have high δ¹⁸O. The high δ¹⁸O zircons (>15‰) from both Sri Lanka and Mogok overlap the values of primary marine carbonates, and marbles are known detrital gemstone sources in both localities. The high δ¹⁸O zircons are thus metamorphic; the 15–25‰ zircon values are consistent with a marble origin in a rock-dominated system (i.e., low fluid_(external)/rock); the lower δ¹⁸O zircon values (9–15‰) are consistent with an origin in an external fluid-dominated system, such as skarn derived from marble, although many non-metasomatized marbles also fall in this range of δ¹⁸O. High δ¹⁸O (>15‰) and the absence of zoning can thus be used as a tracer to identify a marble source for high δ¹⁸O detrital zircons; this recognition can aid provenance studies in complex metamorphic terranes where age determinations alone may not allow discrimination of coeval source rocks. Metamorphic zircon megacrysts have not been reported previously and appear to be associated with high-grade marble. Identification of high δ¹⁸O zircons can also aid geochronology studies that seek to date high-grade metamorphic events due to the ability to distinguish metamorphic from detrital zircons in marble.     

In situ observation of a garnet/perovskite transition in CaGeO<Subscript>3</Subscript>

We used an in situ measurement method to investigate the phase transition of CaGeO₃ polymorphs under high pressures and temperatures. A multi-anvil high-pressure apparatus combined with intense synchrotron X-ray radiation was used. The transition boundary between a garnet and a perovskite phase at T = 900–1,650 K and P = 3–8 GPa was determined as occurring at P (GPa) = 9.0−0.0023 × T (K). The transition pressure determined in our study is in general agreement with that observed in previous high-pressure experiments. The slope, dP/dT, of the transition determined in our study is consistent with that calculated from calorimetry data.     

26Al‐26Mg isotope systematics of the first solids in the early solar system

High‐precision bulk aluminum‐magnesium isotope measurements of calcium‐aluminum‐rich inclusions (CAIs) from CV carbonaceous chondrites in several laboratories define a bulk ²⁶Al‐²⁶Mg isochron with an inferred initial ²⁶Al/²⁷Al ratio of approximately 5.25 × 10^?5, named the canonical ratio. Nonigneous CV CAIs yield well‐defined internal ²⁶Al‐²⁶Mg isochrons consistent with the canonical value. These observations indicate that the canonical ²⁶Al/²⁷Al ratio records initial Al/Mg fractionation by evaporation and condensation in the CV CAI‐forming region. The internal isochrons of igneous CV CAIs show a range of inferred initial ²⁶Al/²⁷Al ratios, (4.2–5.2) × 10^?5, indicating that CAI melting continued for at least 0.2 Ma after formation of their precursors. A similar range of initial ²⁶Al/²⁷Al ratios is also obtained from the internal isochrons of many CAIs (igneous and nonigneous) in other groups of carbonaceous chondrites. Some CAIs and refractory grains (corundum and hibonite) from unmetamorphosed or weakly metamorphosed chondrites, including CVs, are significantly depleted in ²⁶Al. At least some of these refractory objects may have formed prior to injection of ²⁶Al into the protosolar molecular cloud and its subsequent homogenization in the protoplanetary disk. Bulk aluminum and magnesium‐isotope measurements of various types of chondrites plot along the bulk CV CAI isochron, suggesting homogeneous distribution of ²⁶Al and magnesium isotopes in the protoplanetary disk after an epoch of CAI formation. The inferred initial ²⁶Al/²⁷Al ratios of chondrules indicate that most chondrules formed 1–3 Ma after CAIs with the canonical ²⁶Al/²⁷Al ratio.     

Analyses Of Jovian Decametric Radiation -Bursts Interacting With N-Bursts

Dynamic spectra of S-bursts of Jovian decametric radiations are obtained by using a high time resolution radio spectrograph which has a time resolutionof 2 msec and the bandwidth of 2 MHz.Within occurrence of 65 S-burst events observed in the period from 1983 to 1999, 26 events have been identified as the S-N burst events, which are characterized by the interaction between the S-burst emissions and the Narrow band emissions. In the dynamic spectra of the S-N burst, the trend of emissions with negative and slower frequency drift named as “Trailing Edge Emission” are often observed shortly after the appearance of the S-burst.Detailed analyses of these phenomena revealed that the Trailing Edge Emission is not a manifestation of S-burst with slower drift rate but a variation ofN-burst. The results suggested that S-burst and the associated Trailing Edge Emission are formed simultaneously started from a common region with different drift rates. It has been further suggested that the appearance of the S-burstsis not controlled by the geometrical effect between the source region and theobserver, but directly reflects the generation of the source region widelydistributed in an altitude range from a few thousands km to 30,000 km, alongthe Io flux tube. This revised version was published online in July 2006 with corrections to the Cover Date.     

Fine‐structures of planar deformation features in shocked olivine: A comparison between Martian meteorites and experimentally shocked basalts as an indicator for shock pressure

We performed shock recovery experiments on an olivine‐phyric basalt at shock pressures of 22.2–48.5 GPa to compare with shock features in Martian meteorites (RBT 04261 and NWA 1950). Highly shocked olivine in the recovered basalt at 39.5 and 48.5 GPa shows shock‐induced planar deformation features (PDFs) composed of abundant streaks of defects. Similar PDFs were observed in olivine in RBT 04261 and NWA 1950 while those in NWA 1950 were composed of amorphous lamellae. Based on the present results and previous studies, the width and the abundance of lamellar fine‐structures increased with raising shock pressure. Therefore, these features could be used as shock pressure indicators while the estimated pressures may be lower limits due to no information of temperature dependence. For Martian meteorites that experienced heavy shocks, the minimum peak shock pressures of RBT 04261 and NWA 1950 are estimated to be 39.5–48.5 GPa and 48.5–56 GPa, respectively, which are found consistent with those estimated by postshock temperatures expected by the presence of brown olivine. We also investigated shock‐recovered basalts preheated at 750 and 800 °C in order to check the temperature effects on shock features. The results indicate a reduction in vitrifying pressure of plagioclase and a pressure increase for PDFs formation in olivine. Further temperature‐controlled shock recovery experiments will provide us better constraints to understand and to characterize various features found in natural shock events.     

Isotopic tracers for water masses in the coastal region of eastern Hokkaido

In this study we used two stable isotopes, δ¹³C and δ¹⁸O, for water mass classification in the coastal region off eastern Hokkaido. δ¹³C* values, which were corrected for the biological effect, and δ ¹⁸O values up to 300 m depth suggested that the isotopic character of the onshore and offshore water in the southern Okhotsk Sea, the Nemuro Strait and the western North Pacific could be explained by the mixing of three source waters: the Oyashio water (OYW), Soya Warm Current water (SWCW) and East Sakhalin Current water (ESCW). In summer, δ ¹³C*-δ ¹⁸O plots indicated mixing between SWCW from the southern Okhotsk Sea and OYW in the Pacific coast of southeastern Hokkaido, while temperature-salinity plots of the onshore water showed minimal difference from the offshore OYW. In winter, on the other hand, the mixed water of ESCW and OYW (or SWCW) appeared in the Pacific coastal region, distributed as cold, low salinity onshore water. Finally, we estimated mixing ratios of OYW, SWCW and ESCW in the coastal region of western North Pacific using their mean values of δ ¹³C* and δ ¹⁸O as endmembers. These results suggest seasonal and yearly changes of water mass combination en route from the southern Okhotsk Sea to the western North Pacific.     

Effects of Fetch on Turbulent Flow and Pollutant Dispersion Within a Cubical Canopy

The effects of fetch on turbulent flow and pollutant dispersion within a canopy formed by regularly-spaced cubical objects is investigated using large-eddy simulation. Six tracer gases are simultaneously released from a ground-level continuous pollutant line source placed parallel to the spanwise axis at the first, second, third, fifth, seventh and tenth rows. Beyond the seventh row, the standard deviations of the fluctuations in the velocity components and the Reynolds shear stresses reach nearly equivalent states. Low-frequency turbulent flow is generated near the bottom surface around the first row and develops as the fetch increases. The turbulent flow eventually passes through the canopy at a near-constant interval. The mean concentration within the canopy reaches a near-constant value beyond the seventh row. In the first and second rows, narrow coherent structures frequently affect the pollutant escape from the top of the canopy. These structures increase in width as the fetch increases, and they mainly affect the removal of pollutants from the canopy.