Distribution of local Cs anomalies on the seafloor near the Fukushima Dai-ichi Nuclear Power Plant

An estimated 3.5 ± 0.7 × 10¹⁵ Bq of ¹³⁷Cs is thought to have been discharged into the ocean following the melt down at Fukushima Dai-ichi Nuclear Power Plant (F1NPP). While efforts have been made to monitor seafloor radiation levels, the sampling techniques used cannot capture the continuous distribution of radionuclides. In this work, we apply in situ measurement techniques using a towed gamma ray spectrometer to map the continuous distribution of ¹³⁷Cs on the seafloor within 20 km of the F1NPP. The results reveal the existence of local ¹³⁷Cs anomalies, with levels of ¹³⁷Cs an order of magnitude higher than the surrounding seafloors. The sizes of the anomalies mapped in this work range from a few meters to a few hundreds of meters in length, and it is demonstrated that the distribution of these anomalies is strongly influenced by meter scale features of the terrain.     

Assessing image processing techniques for geological mapping: a case study in Eljufra,Libya

Various image processing techniques were experimented with in this study to evaluate their efficiency for geological mapping in the Eljufra area of northwest Libya. Remote sensing data including multi-spectral optical Landsat Enhanced Thematic Mapper (ETM+), Synthetic Aperture Radar (ERS-2 SAR) and Digital Elevation Models (DEMs) extracted from the Shuttle Radar Topography Mission (SRTM) data were used to trace different lithological units as well as extracting geological lineaments in the study area. The study area is located in an arid environment mostly devoid of any vegetation. Most lithological and structural units are distinguishable based on their topographic form and spectral properties. Fusion of ETM+ and ERS-2 images was experimented with to further identify lithological units. Shaded relief techniques were implemented to enhance terrain perspective views and to extract geological lineaments. The results discriminated different rock units and modified formation boundaries and revealed new geological lineaments. Nine rock units were identified and plotted in the new geological map defined by the new boundaries. The dominant lineaments tend to run in the NNW-SSE and NNE-SSW directions. Analysis and interpretation of the lineaments provided information about the tectonic evolution of the study area.     

Reflection on the development of the tool kits of Bertin’s methods

ABSTRACT

Bertin’s first book, Semiology of Graphics, was published in 1967. His second book, Graphics and Graphic Information Processing, was subsequently published in 1977. The word “processing” in the title of the second book is interesting because in those days there were no personal computers with an interactive display system. But in Bertin’s laboratory there were many kinds of tool kits – basically manually developed thematic maps and data analysis. Bertin’s methods were concerned with making a thematic map and data visualization. Maps, and more generally graphics, were represented by sets of cartographic symbols. Thus, they are abstractions that demand both theoretical and technical literacy to represent and understand them. If the representation is systematic, a sort of tool kit might be necessary, because the representation demands consistency based on the theory. Otherwise a cartographer faces the risk of an unstable and unintelligible representation. In this paper, we discuss the discrimination between tool kits intended either for an automated system or a process assisting system. The latter process might be useful and necessary to develop a graphic way of thinking. This investigation refers to Bertin’s books, materials conserved at the National Archives in Paris, and other related software developed later.

Abbreviation: EHESS: Ecole des Hautes Etudes en Sciences Sociales inherited Ecole Pratique des Hautes Etudes since 1975     

Practical evaluation of carbon sources of forest soils in Slovenia from stable and radio-carbon isotope measurements

Carbon sources were estimated by measuring carbon isotope ratios (??¹³C and ??¹⁴C) with accelerator mass spectrometry (AMS) in forest soils of different lithology. Six locations were selected in temperate deciduous and coniferous stands in Slovenia (?irovski vrh, Idrija, Ko?evski Rog, Pohorje, Gori?nica, and Rakitna), where carbonate rocks consisting of limestone and dolomite are abundant as underlying bedrock. Carbon isotope fractionation would not have occurred in two carbonaceous soils, since the values of both ??¹³C and ??¹⁴C changed consistently in these soils after thermal (550°C, 2?h) or chemical (1?M HCl, 24?h) treatments. Organic components were found to be predominant carbon sources (70?C100%) in the uppermost portions (0?C2?cm in depth). In deeper portions at a depth of about 30?C35?cm, soil carbon may be derived completely from underlying carbonate minerals in Idria, western part of Slovenia. The Combination of heat and chemical treatments with AMS provides practical information on soil carbon sources in carbonaceous soils.     

Detection and isolation of p-nitrophenol-lowering bacteria from intestine of marine fishes caught in Japanese waters

To determine the existence of p-nitrophenol (PNP)-lowering bacteria in intestine of Japanese coastal fish, the gastro-intestinal contents were incubated in Brain Heart Infusion (BHI) broth and minimal medium (MM) broths containing 1 mmol/L PNP at 30 °C for 7 days. Among 26 samples of 19 fish species, 17 samples showed a decrease in PNP of 0.5-0.8 mmol/L in BHI broth, but no decrease was shown in MM broth. Eighteen PNP-lowering bacterial strains were isolated from four fishes. All of the strains were identified as Lactococcus lactis subsp. lactis. Three L. lactis strains JS1-3 isolated from Japanese seabass Lateolabrax japonicus showed the highest PNP-lowering activity (0.44 mmol/L). Optimum temperature and pH for the growth and PNP decreasing corresponded with the marine environment. These results suggested that marine fishes have PNP decreasing bacteria in their intestine. These bacteria might protect host fish from toxicities of PNP and PNP related compounds.     

Numerical analysis on seismic response of Shinkansen bridge-train interaction system under moderate earthquakes

This study is intended to evaluate the influence of dynamic bridge-train interaction (BTI) on the seismic response of the Shinkansen system in Japan under moderate earthquakes. An analytical approach to simulate the seismic response of the BTI system is developed. In this approach, the behavior of the bridge structure is assumed to be within the elastic range under moderate ground motions. A bullet train car model idealized as a sprung-mass system is established. The viaduct is modeled with 3D finite elements. The BTI analysis algorithm is verified by comparing the analytical and experimental results. The seismic analysis is validated through comparison with a general program. Then, the seismic responses of the BTI system are simulated and evaluated. Some useful conclusions are drawn, indicating the importance of a proper consideration of the dynamic BTI in seismic design.     

Performance of dry-separation processes in the recovery of cenospheres from fly ash and their implementation in a recovery unit

Cenospheres recovery is one of the coal fly ash beneficiations, providing economic as well as environmental benefits. Current techniques, such as lagoon or other wet-separation processes, consume large amounts of water and add to water pollution due to leaching of toxic materials from fly ash. The other possible disadvantage is the need for a wide operational area, which is unsuitable for densely populated countries. As wet-separation processes have some disadvantages, an improved and/or sustainable alternative recovery technique is required. An air classifier is one of the alternative techniques. In this study, two types of air classifiers, namely a closed-type pneumatic separator and a micron separator, have been investigated. In terms of separation efficiency, it was found that the micron separator has the potential to be applied in cenospheres recovery from coal fly ash, giving a Newton's efficiency of 0.44, as compared to a value of about 0.26 for the closed-type pneumatic separator. The cenospheres recoveries of both pieces of equipment at their optimum Newton's efficiencies were similar at over 60 wt.%. The separation performance was further assessed from the particle distributions of the overflow and underflow products obtained from both pieces of equipment, as well as from SEM images. It was found that the lower Newton's efficiency of the closed-type pneumatic separator was due to the re-concentration of fine particles in the underflow product at air-flow rates higher than 2.2 m/s (the underflow product yield was about 55 wt.%).In order to further confirm the applicability of this technique, the micron separator, which had provided higher separation efficiency and cenospheres recovery, was deployed in a cenospheres recovery unit prior to the use of a wet-separation process (float and sink tank). About 80% of the cenospheres was recovered, with an 87.8% reduction in the total mass of fly ash to be separated in the float and sink tank. Consequently, much less water was needed for the process of cenospheres recovery. Moreover, it was also confirmed that the micron separator could yield higher quality fly ashes, that is, fly ash types I and II, from lower feed quality of fly ash type IV, which is the lowest category in commercial classification of fly ash according to JIS A6201.     

Integrated magnetobiochronology of the Pliocene–Pleistocene Miyazaki succession,southern Kyushu,southwest Japan: Implications for an Early Pleistocene hiatus and defining the base of the Gelasian (P/P boundary type section) in Japan

An integrated magnetobiochronology of the Miyazaki Pliocene–Pleistocene succession in the Miyazaki area, southwest Japan, was established using planktic foraminiferal and calcareous nannofossil biostratigraphy together with paleomagnetic data. The upper Miyazaki succession in the northern Miyazaki region can be divided into the Takanabe, Hisamine (redefined), and Higoyashiki (new) Formations, in ascending order. A depositional hiatus between the Hisamine Formation and the Takanabe and/or older formations was also identified based on integrated magnetobiostratigraphy from five sections including the Nagatani River (NGT) section through the uppermost Miyazaki succession. The hiatus, herein called the Hisamine unconformity, is equivalent to the Kurotaki unconformity between the Miura and Kazusa groups of the Boso Peninsula in central Japan. The depositional hiatus recognised in the lower Pleistocene of Pacific coastal areas in southwestern and central Japan may have resulted from tectonic activity associated with a change in the subduction direction of the Philippine Sea plate, which commenced prior to ca. 2.2 Ma. The youngest unit just below the hiatus is the upper part of the Takanabe Formation in the NGT section. The NGT section represents the continuous Late Pliocene to earliest Pleistocene sequence including the Gauss/Matuyama boundary and is here proposed as the type section for the Pliocene/Pleistocene boundary in Japan, which the IUGS ratified as the base of the Gelasian in 2009.     

Study on the selection of unsaturated flow model for the different types of soil and soft rock

Precise estimation of unsaturated hydraulic properties of porous media is indispensable in various study areas, such as analyzing the moisture flow, the drying process occurring from the surface, and the pollutant migration beneath the ground surface. Although many empirical/theoretical models describing the unsaturated hydraulic properties have been proposed by several previous researchers, the best model for the different types of soil/rock may not be identical. Thus, the model selection process and the estimation technique of the parameters included in the models should be developed. In the present study, the inverse technique based on the transient evaporation change was investigated to select the model and estimate the model parameters. The experimental work was based on a relatively low permeable soft rock and a relatively high permeable sandy soil (Toyoura standard sand). Experimental equipment was developed to precisely measure the evaporation rate for the high permeable sandy soil. The Genetic Algorithm (GA) was adopted in the inverse technique as an optimization tool. In order to simplify the problem, only the drying process from the saturated condition was considered. It was established that the information concerning the transient evaporation change could be used for the model selection and parameter estimation. Further, the saturation distribution could be used for the selection of the models. The present study provides important information for the development of the model selection process.     

Experimental study on prevention of acid mine drainage by silica coating of pyrite waste rocks with amorphous silica solution

Acid mine drainage (AMD) is a widespread environmental problem associated with working and abandoned mining operations. It results from the microbial oxidation of pyrite in the presence of water and air, affording an acidic solution that contains toxic metal ions. Pyrite microencapsulation, utilizing silica coating, is a novel approach for controlling AMD that has been shown to be very effective in controlling pyrite oxidation. The roles of the solution pH and silica concentration in the formation mechanism for the AMD-preventing coating were investigated. A silica coating can be formed from silica solution at pH 7, at which the amount of Fe eluted from pyrite into the solution is small. No coating was formed at other pH values, and the amounts of eluted Fe were larger than at pH 7, especially at pH 11. The silica coating forms from 2,500 to 5,000 mg/L silica solutions, but not from 0 or 1,000 mg/L silica solutions. The coating formation rate was slower in the 2,500 mg/L silica solution than in the 5,000 mg/L silica solution. The formation of silica coating on pyrite surfaces depends on three main steps: formation of Fe(OH)₃ on the surface of pyrite, reaction between Fe(OH)₃ and silicate in the solution on the pyrite surface, and growth of the silica layer on the first layer of silica. The best pH condition to enable these steps was around 7, and the silica coating formation rate can be controlled by the concentration of silica.