Application of Sensitivity Analysis Using an Adjoint Model for Short-Range Forecasts of the Kuroshio Path South of Japan

A sensitivity experiment has been performed by assimilating altimetric data into a 1.5-layer primitive equation model as a first attempt to examine the impact of initialization on forecasts of the Kuroshio path variability south of Japan. By exploiting the advantage of an adjoint model, our approach clearly shows that a small meander off Shikoku Island has a large impact on the prediction of meander growth in the Kuroshio region. Further, the strengthening of the Kuroshio current and its recirculation clearly becomes an important factor in the development of the meander. These results demonstrate the effectiveness of our assimilation approach in identifying efficient initialization schemes on numerical forecasting of the Kuroshio south of Japan and should help in the construction of an effective observing system for improving the forecasting. This revised version was published online in July 2006 with corrections to the Cover Date.     

The Kyucho in the Bungo Channel,Japan —Periodic intrusion of oceanic warm water

Kyucho is a sudden and swift current which is usually accompanied by rise of water temperature. Several features of the Kyucho in the Bungo Channel, Japan, are presented through field observations. The Kyucho in the Bungo Channel is an intrusion of warm water from the Pacific Ocean into the eastern half of the Bungo Channel, being driven gravitationally and advancing along the eastern coast of the channel. The Kyucho occurs usually in summer and seldom occurs in winter. It occurs at neap tides showing the prominent spring-neap periodicity. The modulation of the vertical mixing intensity associated with the variations of tidal current, wind and surface heating etc. is supposed to be a main cause of springneap and seasonal periodicities.     

Dating pseudotachylyte of the Asuke Shear Zone using zircon fission-track and U–Pb methods

Zircon fission-track (FT) and U–Pb analyses were performed on zircon extracted from a pseudotachylyte zone and surrounding rocks of the Asuke Shear Zone (ASZ), Aichi Prefecture, Japan. The U–Pb ages of all four samples are  67–76 Ma, which is interpreted as the formation age of Ryoke granitic rocks along the ASZ. The mean zircon FT age of host rock is 73 ± 7 (2σ) Ma, suggesting a time of initial cooling through the zircon closure temperature. The pseudotachylyte zone however, yielded a zircon FT age of 53 ± 9 (2σ) Ma, statistically different from the age of the host rock. Zircon FTs showed reduced mean lengths and intermediate ages for samples adjacent to the pseudotachylyte zone. Coupled with the new zircon U–Pb ages and previous heat conduction modeling, the present FT data are best interpreted as reflecting paleothermal effects of the frictional heating of the fault. The age for the pseudotachylyte coincides with the change in direction of rotation of the Pacific plate from NW to N which can be considered to initialize the NNE–SSW trending sinistral–extensional ASZ before the Miocene clockwise rotation of SW Japan. The present study demonstrates that a history of fault motions in seismically active regions can be reconstructed by dating pseudotachylytes using zircon FT thermochronology.     

Rapid contamination during storage of carbonaceous chondrites prepared for micro FTIR measurements

Abstract— Organic contamination (?2965 and ?1260 cm^?1peaks) was found on Tagish Lake (C2) and Murchison (CM2) carbonaceous chondrites containing abundant hydrous minerals by Fourier transform infrared (FTIR) microspectroscopy on the samples pressed on Al plates. On the other hand, anhydrous chondrite (Moss, CO3) was not contaminated. This contamination occurred within one day of storage, when the samples pressed on Al were stored within containers including silicone rubber mats. Volatile molecules having similar peaks to the contaminants were detected by long‐path gas cell FTIR measurements for the silicone rubber mat. Rapid adsorption of the volatile contaminants also occurred when silica gel and hydrous minerals such as serpentine were stored in containers including silicone rubber, silicone grease, or adhesive tape. However, they did not show any contamination when stored in glass and polystyrene containers without these compounds. Therefore, precious astronomical samples such as meteorites, interplanetary dust particles (IDPs), and mission‐returned samples from comets, asteroids, and Mars, should be measured by micro FTIR within one day of storage in glass containers without silicone rubber, silicone grease, or adhesive tape.     

Prediction of iodate adsorption and surface speciation on oxides by surface complexation modeling

Aqueous iodine species occur mainly as iodide (I⁻) and iodate (IO₃⁻), depending on redox conditions. The adsorption of IO₃⁻ on naturally occurring oxides under oxic conditions is of environmental concern. The adsorption behaviors of IO₃⁻ by hydrous ferric oxide (HFO), α-FeOOH, and γ-Al₂O₃ were examined in this study as functions of pH, ionic strength, and solid concentration. Adsorption data were analyzed using an extended triple-layer model (ETLM) for surface complexation modeling to infer IO₃⁻ adsorption reactions and equilibrium constants. Results of ETLM analysis suggest that adsorption of IO₃⁻ is both an outer-sphere and an inner-sphere process, as expressed by the following complexation reactions, which are consistent with the independent pressure jump kinetic results and adsorption enthalpy measurements

     

Three-dimensional simulations of molecular cloud fragmentation regulated by magnetic fields and ambipolar diffusion

We employ the first fully three-dimensional simulation to study the role of magnetic fields and ion–neutral friction in regulating gravitationally driven fragmentation of molecular clouds. The cores in an initially subcritical cloud develop gradually over an ambipolar diffusion time while the cores in an initially supercritical cloud develop in a dynamical time. The infalling speeds on to cores are subsonic in the case of an initially subcritical cloud, while an extended (≳0.1 pc) region of supersonic infall exists in the case of an initially supercritical cloud. These results are consistent with previous two-dimensional simulations. We also found that a snapshot of the relation between density (ρ) and the strength of the magnetic field ( B ) at different spatial points of the cloud coincides with the evolutionary track of an individual core. When the density becomes large, both the relations tend to   B ∝ρ^0.5  .     

A trial for monitoring temporal variation of seismic velocity using an ACROSS system

Abstract The temporal variation of seismic velocity near the Nojima Fault, which ruptured during the 1995 Kobe earthquake (Hyogo-ken Nanbu earthquake), was detected using an accurately controlled routine-operated seismic source (ACROSS). The source generates elastic waves by a centrifugal force of an eccentric mass rotating around an axis. The mass is driven with an AC servomotor whose angular position is accurately controlled with reference to a very accurate global positioning system (GPS) clock. The error of the mass' position is less than 0.002 radian and does not accumulate. As a result, the source generates sinusoidal waves of very narrow spectral peaks enabling their detection with an excellent signal-to-noise ratio. Although the stability of the rotation is quite excellent, a large daily variation was found, which seems to be caused by changes in atmospheric temperature. The daily variation was 10% in amplitude and 0.1 radian in phase of the signal observed at the 800 m borehole seismometer. A significant variation was found to be due to that of coupling between the rotational source and the foundation made of reinforced concrete in which the source was situated. In order to make a correction on the signal of the 800 m borehole seismometer, the vibration of the foundation was measured and modeled assuming a rigid body movement. The correction successfully reduced the daily variation by approximately 90%, resulting in a variation of 1% in amplitude and 0.01 radian in phase. The phase variation of 0.01 radian corresponds to 100 μs and less than 0.1% in velocity over 1000 m between the source and the receiver.     

Episodic exhumation of accretionary complexes: Fission-track thermochronologic evidence from the Shimanto Belt and its vicinities, southwest Japan

Abstract Apatite and zircon fission-track (FT) analyses of the Shimanto accretionary complex and its vicinities, southwest Japan, unraveled the episodic material migration of the deep interiors of the accretionary complex. Apatite data with 100°C closure temperature (T_e) generally indicate ~10 Ma cooling throughout the Shimanto complex. In contrast, zircon data with 260°C T_e exhibit a wide range of apparent ages as a consequence of paleotemperature increase to the zircon partial annealing zone. In the Muroto and Kyushu regions, maximum temperatures tend to have been higher in the northern, older part of the complex, with indistinguishable temperature differences between coherent and melange units adjacent to each other. It thus suggests, along with vitrinite reflectance data, that older accretionary units occurring to the north sustain greater maximum burial during the accretion-burial-exhumation process. Zircon data suggest two cooling episodes: ~70 Ma cooling at widespread localities in the Cretaceous Shimanto Belt and Sambagawa Belt, and ~15 Ma cooling in the central Kii Peninsula. The former is consistent with ⁴⁰Ar/³⁹Ar cooling ages from the Sambagawa Belt, whereas the latter slightly predates the widespread 10 Ma apatite cooling ages. These data imply that the extensive material migration and exhumation took place in and around the Shimanto complex in Late Cretaceous as well as in Middle Miocene. Considering tectonic factors to control evolution of accretionary complexes, the episodic migration is best explained by accelerated accretion of sediments due to increased sediment influx at the ancient Shimanto trench, probably derived from massive volcano-plutonic complexes contemporaneously placed inland. Available geo- and thermochronologic data suggest that extensive magmatism triggered regional exhumation twice in the past 100 Ma, shedding new light on the cordilleran orogeny and paired metamorphism concepts.     

New age constraints on the cooling and unroofing history of the Trans-Himalayan Ladakh Batholith (Kargil area), N. W. India

Thermotectonic history of the Trans-Himalayan Ladakh Batholith in the Kargil area, N. W. India, is inferred from new age data obtained here in conjunction with previously published ages. Fission-track (FT) ages on apatite fall around 20±2 Ma recording cooling through temperatures of ∼100°C and indicating an unroofing of 4 km of the Ladakh Range since the Early Miocene. Coexisting apatite and zircon FT ages from two samples in Kargil show the rocks to have cooled at an average rate of 5–6°C/Ma in the past 40 Ma. Zircon FT ages together with mica K−Ar cooling ages from the Ladakh Batholith cluster around 40–50 Ma, probably indicating an Eocene phase of uplift and erosion that affected the bulk of the batholith after the continental collision of India with the Ladakh arc at 55 Ma. Components of the granitoids in Upper Eocene-Lower Oligocene sediments of the Indus Molasse in Ladakh supports this idea. Three hornblende K−Ar ages of 90 Ma, 55 Ma, and 35 Ma are also reported; these distinctly different ages probably reflect cooling through 500–550°C of three phases of I-type plutonism in Ladakh also evidenced by other available radiometric data: 102 Ma (mid-Cretaceous), 60 Ma (Palaeocene), and 40 Ma (Late Eocene); the last phase being localised sheet injections. The geodynamic implications of the age data for the India-Asia collision are discussed.     

Petrological study of Nasu-Chausudake Volcano (ca. 16 ka to Present), northeastern Japan

Chausudake Volcano is representative of the active volcanoes in northeastern Japan, and has a record of many historical eruptions. Because its 16-ky eruptive history is well documented, Chausudake is well-suited for examining the temporal change of magma chamber processes and for assessing potential hazards. The activity of the Chausudake Volcano can be divided into six magmatic units (CH1-CH6). Most of its products have similar characteristics, but those from unit CH1 show wider variation. Most rocks are andesite and have plagioclase, clinopyroxene, orthopyroxene, and Fe-Ti oxides as phenocrysts, with or without olivine or quartz. Mafic inclusions, which are observed in most products, are basaltic andesites that have various combinations of the same phenocryst species. Petrographic features observed in host rocks and mafic inclusions, such as disequilibrium phenocrysts and resorbed textures, suggest magma mixing/co-mingling. Whole rock compositions of both host rocks and mafic inclusions show linear trends in variation diagrams, which suggest that the rocks are derived from the mixing/co-mingling between mafic and felsic end members. Bulk silica content of the mafic end-member magma is estimated to be ca. 52%, and contains Mg-rich olivine and An-rich plagioclase. The temperature of this end member is estimated to have been higher than 1,100 °C. Bulk silica content of the felsic end-member magma is estimated to be ~66%, and contains Mg-poor pyroxenes, An-poor plagioclase, and quartz phenocrysts, with a temperature of between 800 and 900 °C. Trace element compositions show that the end members have different origins, but have changed little over the entire 16-ky of activity. The mafic end-member magmas might come from a lower-crustal homogeneous, large magma chamber, whereas the felsic end-member magmas may be partial melts of crustal materials produced by the heat of the mafic end member. Felsic end-member magma may have accumulated in the middle crust before CH1 activity. The mixing ratio of the felsic to mafic end members was 0.5:0.5 to 0.4:0.6 for the CH1 unit, and ca. 0.4:0.6 for the other units. Considering that ca. 75% of the total volume of the eruptive products form the first unit, its wider compositional variation is attributed to more heterogeneous mixing ratios.