Inverse analysis of deformation mechanism by geodetic surveys−a case study

In 1988 two large earthquakes with magnitude of Ms 7.6 and Ms 7.2 occurred in Lancang-Genma area, Southwest China. This paper discusses the determination of the spatial distribution of fault slip caused by the earthquakes using geodetic surveys. The prior information obtained from geological surveys and seismological investigations was used to determine the geometry of the fault plane and the average fault slip. The smooth constraints on the fault slips have been described by a normal distribution with hyperparameters, which are incorporated in the inversion analysis with a Bayesian model. Akaike’s Bayesian Information Criterion (ABIC) is used to get the optimal values of hyperparameters. Once the hyperparameters are determined, the maximum likelihood method is employed to estimate the patterns of a fault slip. Based on the results of inverse analysis monitoring geodetic surveys can be properly designed and conducted to obtain crust deformations and predict potential earthquake sources.     

Mean wind-direction shear through a forest canopy

The equations of motion applying to the wind field in a forest canopy are simplified to a balance between the shearing stress gradient and either the form-drag of the leaves in the upper dense canopy, or the overall horizontal pressure gradient in the more open space beneath. The equations imply that, in descending through the forest, the stress and wind vectors turn through an angle which depends on the forest characteristics and on the stability and the speed of the airflow above the forest. The turning is roughly confirmed by an overall average measured on a very flat site near Thetford, Norfolk, covered by an extensive uniform pine forest.     

Transformations of mercury, iron, and sulfur during the reductive dissolution of iron oxyhydroxide by sulfide

Methylmercury can accumulate in fish to concentrations unhealthy for humans and other predatory mammals. Most sources of mercury (Hg) emit inorganic species to the environment. Therefore, ecological harm occurs when inorganic Hg is converted to methylmercury. Sulfate- and iron-reducing bacteria (SRB and FeRB) methylate Hg, but the effects of processes involving oxidized and reduced forms of sulfur and iron on the reactivity of Hg, including the propensity of inorganic Hg to be methylated, are poorly understood. Under abiotic conditions, using a laboratory flow reactor, bisulfide (HS⁻) was added at 40 to 250 μM h⁻¹ to 5 g L⁻¹ goethite (α-FeOOH) suspensions to which Hg(II) was adsorbed (30-100 nmol m⁻²) at pH 7.5. Dissolved Hg initially decreased from 10³ or 10⁴ nM (depending on initial conditions) to 10⁻¹ nM, during which the concentration of Hg(II) adsorbed to goethite decreased by 80% and metacinnabar (β-HgS_(s)) formed, based on identification using Hg L_III-edge extended X-ray absorption fine structure (EXAFS) spectroscopic analysis. The apparent coordination of oxygens surrounding Hg(II), measured with EXAFS spectroscopy, increased during one flow experiment, suggesting desorption of monodentate-bound Hg(II) while bidentate-bound Hg(II) persisted on the goethite surface. Further sulfidation increased dissolved Hg concentrations by one to two orders of magnitude (0.5 to 10 nM or 30 nM), suggesting that byproducts of bisulfide oxidation and Fe(III) reduction, primarily polysulfide and potentially Fe(II), enhanced the dissolution of β-HgS_(s) and/or desorption of Hg(II). Rapid accumulation of Fe(II) in the solid phase (up to 40 μmol g⁻¹) coincided with faster elevation of dissolved Hg concentrations. Fe(II) served as a proxy for elemental sulfur [S(0)], as S(0) was the dominant bisulfide oxidation product coupled to Fe(III) reduction, based on sulfur K-edge X-ray absorption near edge structure (XANES) spectroscopy. In one experiment, dissolved Hg concentrations tracked those of all sulfide species [S(-II)]. These results suggest that S(-II) reacted with S(0) to form polysulfide, which then caused the dissolution of β-HgS_(s). A secondary Fe-bearing phase resembling poorly formed green rust was observed in sulfidized solids with scanning electron microscopy, although there was no clear evidence that either surface-bound or mineralized Fe(II) strongly affected Hg speciation. Examination of interrelated processes involving S(-II) and Fe(III) revealed new modes of Hg solubilization previously not considered in Hg reactivity models.     

Low-angle reflectivity modeling of land clutter

In this letter, a practical mean reflectivity model of radar land clutter (LC) for the complex system design of ground-based radars involved in low-angle targets on some typical terrains is studied using the inductive reasoning method. The functional relationships between the radar parameters and radar surface clutter backscattering are analyzed. Following the recent research work in the area of reflectivity modeling of LC in the literature, the least squares method is employed to estimate the model parameters. The model is validated using reliable practical data and shown to outperform other models in accuracy.     

Design and Long-Term Monitoring of Tokyo International Airport Extension Project Constructed on Super-Soft Ground

To meet the increasing demand for air transportation, Ministry of Land, Infrastructure and Transport had carried out the offshore extension project at Tokyo International Airport (Haneda Airport). The airport should be constructed to be perfectly level, but the ground conditions with very thick layers of super soft dredged soils and need for reclamation made the task very difficult. Because of large amount of consolidation settlement, ground improvement by combined vertical drain method was applied to decrease residual and differential settlement after opening of new airport. This paper is aimed to introduce the design concept and method of ground improvement for this project. In addition the result of ground improvement is keeping satisfactory performance for operating airport confirmed by long-term monitoring for airport facilities.     

On the causes of 18O-depletion and 18O/16O homogenization during regional metamorphism; the East Humboldt Range core complex,Nevada

 Previous stable isotope studies at Lizzies Basin revealed that metasedimentary rocks are ¹⁸O-depleted relative to protolith values, particularly in the lower parts of the section (Lower Zone) where the rocks are also isotopically homogeneous on a scale of hundreds of meters (quartz δ¹⁸O=+9.0 to +9.6 per mil). In contrast, metasedimentary rocks at higher levels at Lizzies Basin (Upper Zone) are less ¹⁸O-depleted and more heterogeneous in δ¹⁸O. In order to understand more fully the isotopic evolution of this terrane, a series of detailed, meter-scale traverses across various metamorphic and igneous lithologies were completed at Lizzies Basin, and at the structurally higher Angel Lake locality. Traverses in the Lizzies Basin Lower Zone and in the lower parts of Angel Lake (Angel Lake Lower Sequence) across various silicate lithologies, including abundant granitoids, reveal similar degrees of homogeneity, although the average δ¹⁸O values are higher at Angel Lake. In contrast, traverses which include substantial thicknesses of marble and calc-silicate gneiss and very little granitoid have more heterogeneous quartz δ¹⁸O values (+11.9 to +13.4 per mil), and also have a higher average δ¹⁸O (+12.9 per mil), than observed elsewhere. The scale of ¹⁸O/¹⁶O homogeneity in quartz observed at Lizzies Basin and Angel Lake (meters to hundreds of meters) requires fluid-mediated isotope exchange, which accompanied Tertiary metamorphism. There is a correlation between the degree of ¹⁸O-depletion in metasedimentary rocks, ¹⁸O/¹⁶O homogenization between lithologies, and the proportion of granitoids (leucogranites in particular) within any part of the section, and a corresponding anticorrelation with the proportion of marble. This points to a causal relationship, whereby the leucogranites (as well as the Tertiary hornblende diorite and biotite monzogranite) acted as both a relatively low-¹⁸O reservoir and a source of fluids to enhance exchange, while the marbles hindered isotope depletion and homogenization by acting as relatively high-¹⁸O reservoirs and impermeable layers. Material balance calculations help delineate the plausible mechanisms of exchange between granitoids and metasediments. Single-pass infiltration of magmatic fluids from the granitoids is not capable of reproducing all of the observations. Fluid-mediated exchange by convective recirculation of magmatic fluids on a scale of meters is the mechanism which explains all of the observations. The generalized model for the isotopic evolution of the East Humboldt Range core complex provides an excellent opportunity to establish the main causes and controlling factors of ¹⁸O-depletion and ¹⁸O/¹⁶O homogenization during regional metamorphism. Received: 27 July 1993 / Accepted: 1 July 1994     

System dynamic modeling to assess the effect of subsurface drain spacing and depth on minimizing the environmental impacts

The excessive loss of soil nitrogen through drainage losses causes different environmental problems. The depth and spacing drain of drains play an important role in the quality and quantity of discharged drainage into the environment. In this paper, a simple but comprehensive model using system dynamic approach for water cycle and nitrogen dynamics was used to simulate the effect of drain depth and spacing on nitrate and ammonium losses in a sugarcane agro-industrial company. Twenty-four scenarios were modeled including the combination of four different drain depths and six drain spacing to compare the effect of drain depth and spacing on the nitrogen uptake by plant, denitrification, net mineralization, the amount of ammonium losses through runoff, nitrate and ammonium losses through drainage water, the sum of excessive water, the stress day index and the relative yield. The results indicated that optimal drainage system density is obtained in the depth of 1.1 m and spacing of 80 m, in a way that the total drainage losses would be reduced up to an acceptable level. The optimum designing of the drainage systems according to environmental criteria can control nitrogen pollution load at farm level and can therefore have appropriate results both in terms of economic and environmental considerations.     

Strain softening of K0-consolidated Changi sand under plane-strain conditions

Experimental results are presented in this paper to study the strain softening behaviour of a marine dredged sand under plane-strain conditions. K₀ consolidated drained and undrained tests were conducted using a new plane-strain apparatus to characterize the strain softening behaviour of the sand under plane-strain conditions. For medium dense specimens, strain softening and shear bands were observed to occur under both drained and undrained conditions. For very loose specimens, no shear bands were observed and critical states were reached within the homogeneous deformation region in both drained and undrained tests. Strain softening was observed to occur at small strain for very loose specimens under undrained conditions. Two types of strain softening, the homogenous softening and banding softening, were identified and the conditions for strain softening were established. The results obtained from this study were compared with the studies by Han and Vardoulakis (Géotechnique 41(1):49–78, 1991), Finno et al. (J Geotech Eng ASCE 122(6):462–473, 1996, Géotechnique 47(1):149–165, 1997) and Mokni and Desrues (Mech Cohes-Frict Mat 4:419–441, 1998).