Numerical Simulation Of Oil/Oily-Contaminant Migration And Entrapment In A Lenticular Reservoir

Numerical simulations show that water and oil/oily-contaminant migration are controlled by regional fluid-potential fields which may be modified locally by highly permeable lenses and buoyancy. In addition, fluid potentials are coupled to the distribution of oil/oily-contaminant via relative permeability and capillary-pressure curves. As saturation distributions evolve through space and time, so do the water and oil fluid-potential surfaces. The importance of capillary forces in oil contaminant migration and entrapment is illustrated by the fact that, in certain cases, lenses fill from above, even when the migrating fluid is lighter than water. Capillary forces operating in conjunction with lenticular reservoirs create excellent dynamic oil traps by allowing free passage of water, while retaining and concentrating oil. The analysis of oil (oily-contaminant) migration using numerical modeling and potentiometric-surface techniques is useful for the prediction of migration pathways and potential accumulation sites. On the other hand, identifying acatual accumulations from fluid-potential measurements (via inverse modeling) is not possible because fluid potentials are not uniquely dependent on saturation.     

X-ray absorption contrast images of binary chemical reactions

Low-divergence synchrotron-sourced X-rays enable a radiographic imaging scheme for full characterization of binary chemical reactions and characterization by type of more complex reactions, in situ, in diamond anvil cells (DAC). Spatially resolved reactants are induced to react by laser heating of their interface. The spatially intermediate products are observed through X-ray absorption contrast. Limits to the technique include the ability to maintain controlled experiment geometry during compression and the ability to resolve chemical differences between reactants and products by X-ray absorption. The ability to make in situ observations at experimental pressure and temperature obviates the problem with quenching techniques for capturing liquid compositions in experiments with dimensions smaller than the diffusion length during quenching time. Partially molten Fe-alloy systems, of poor quenchability, are examined at DAC pressures and temperatures for relevance to Earth's core constitution and evolution. Determinations of eutectic melting in Fe–FeS match known results. Of the probable light elements that may alloy with Fe in the Earth's liquid outer core, Fe–FeS experiments show only modest quenching problems, but C and Si alloy experiments are highly vulnerable to quenching artifacts. The observed reactivity of FeS, Fe₃C, FeSi, and FeO(OH) with Fe in DAC makes the observed non-reactivity between Fe and FeO more significant, reducing the probability that oxygen alone is the major alloy in Earth's molten outer core.     

Geoarchaeological evidence on a Late Bronze Age earthquake,Ohrid Basin (North Macedonia)

Geoarchaeological investigations on the northeastern shore of Lake Ohrid revealed 3.5 m thick deepwater lacustrine sediments overlying terrestrial vegetation macrofossils, worked wood and abundant potsherds dated to the Late Bronze Age (LBA). Distinct contact of deepwater sediment with the sub-aerial weathered limestone bedrock point to a sudden increase in lake level. According to radiocarbon data, catastrophic flooding occurred shortly after 1214 yr bc. Because the area is located in a highly active seismic zone, we propose that this event was caused by tectonically induced, metre-scale coseismic subsidence related to faults bordering the Ohrid alluvial plain. Moreover, this event coincides well with a dramatic switch in the habitation and settlement strategy in the region. More important, however, is the finding that the age of the proposed massive tectonic event and change in habitation lies within the interval of the proposed ‘earthquake storm’ in the eastern Mediterranean dated to 1225–1175 bc. As the Ohrid-Korça zone belongs to the same tectonic province, a relationship between the abovementioned earthquakes and the proposed event can be expected. This research therefore might provide the first direct evidence of a large-scale earthquake event linkable to the LBA collapse of Europe's first urban civilisation in the Aegean.     

Effect of Biofuels on Biodegradation of Benzene and Toluene at Gasoline Spill Sites

The risk that benzene and toluene from spills of gasoline will impact drinking water wells is largely controlled by the natural anaerobic biodegradation of benzene and toluene. Benzene and toluene, as well as ethanol and other biofuels, are degraded under anaerobic conditions to the same pool of degradation products. Biodegradation of biofuels may produce concentrations of degradation products that make the thermodynamics for degradation of benzene and toluene infeasible under methanogenic conditions and produce larger plumes of benzene and toluene. This study evaluated the concentrations of fuel alcohols that are necessary to inhibit the anaerobic degradation of benzene and toluene under methanogenic conditions. At two ethanol spill sites, concentrations of ethanol greater ≥42 mg/L inhibited the anaerobic degradation of toluene. The pH and concentrations of acetate, dissolved inorganic carbon, and molecular hydrogen were used to calculate the Gibbs free energy for the biodegradation of toluene. In general, the anaerobic biodegradation of toluene was not thermodynamically feasible in water with ≥42 mg/L ethanol. In a microcosm study, when the concentrations of ethanol were ≥14 mg/L or the concentrations of n‐butanol were ≥16 mg/L, the biodegradation of the alcohols consistently produced concentrations of hydrogen, dissolved inorganic carbon, and acetate that would preclude natural anaerobic biodegradation of benzene and toluene by syntrophic organisms. In contrast, iso‐butanol and n‐propanol only occasionally produced conditions that would preclude the biodegradation of benzene and toluene.     

Evaluation of an automated EA-IRMS method for total carbon analysis of atmospheric aerosol at HEKAL

Comprehensive atmospheric studies have demonstrated that carbonaceous particles are one of the main components of atmospheric aerosols over Europe. The aim of our study was to establish an automated elemental analyser interfaced to a stable isotope mass spectrometer (EA-IRMS) method at the Hertelendi Laboratory of Environmental Studies (HEKAL), as a suitable method of quantification of total carbon mass in individual PM_2.5 aerosol samples. Total carbon (TC) mass and simultaneous stable isotopic ratios were determined for both test standard and genuine aerosol samples. Finally, the results were compared to the ones obtained independently by an alternative sealed tube combustion method developed previously at HEKAL. The TC recovery tests of standard material prepared by the sealed tube method confirmed at least a carbon recovery yield of 92% for a broad range of carbon mass (100–2000 μg). The stable isotopic results confirmed that sealed tube method is reproducible and suitable to be used as a reference to verify our new EA-IRMS method. The EA-IRMS TC measurements of genuine aerosols gave on average 3% higher carbon recovery yield, relative to the uncorrected results of the sealed tube method. The comparison of the stable isotopic results by the two methods for aerosols also showed minimal differences. Consequently, the possibility of simultaneous TC and stable isotopic analyses makes the EA-IRMS method a very attractive alternative for continuous measurement of aerosols, with an accuracy and reliability similar to other commercial devices.     

A seasonal comparison of prokaryote numbers,biomass and heterotrophic productivity in waters of the KwaZulu-Natal Bight,South Africa

The KwaZulu-Natal Bight is a shallow indentation of the eastern seaboard of South Africa, characterised by a narrow (45 km wide) extension of the continental shelf, with a shelf break at about 100 m. It has a complex hydrography: the waters of the bight are derived from the fast-flowing, southward-trending Agulhas Current, which is fed mostly by the tropical and subtropical surface waters of the South-West Indian Ocean subgyre, which are generally oligotrophic in nature, notably depleted in reduced nitrogen and phosphate except at river mouths and during periodic upwelling of deeper nutrient-rich water. Despite this, the bight is believed to be relatively productive, and it is suggested that efficient nutrient recycling by prokaryotes may sustain primary productivity efficiently, even in the absence of new nutrient inputs. Here we have measured bacterial numbers, biomass and heterotrophic productivity during summer and winter in conjunction with phytoplankton standing stock and factors that influence it. Bacterial distribution closely matched phytoplankton distribution in surface waters, and was highest close to the coast. Bacterial standing stocks were similar to those of oligotrophic systems elsewhere (0.5–5.0 × 10⁵ cells ml^–1; 1 × 10^–8 to 1.25 × 10^–7 g C ml^–1) and increased in association with the development of phytoplankton blooms offshore and with inputs of allochthonous material by rivers at the coast. Heterotrophic productivity in summer was lowest in the far south and north of the bight (0.5 × 10^–10 g C ml^–1 h^–1) but higher close to the shore, over shallow banks, and in association with increased phytoplankton abundance over the midshelf (1.0–3.5 × 10^–9 g C ml^–1 h^–1). There were marked seasonal differences with lower bacterial standing stocks (5 × 10⁴ to 2 × 10⁵ cells ml^–1; 4–5 × 10^–9 to 1–2 × 10^–8 g C ml^–1) and very low bacterial productivity (4 × 10^–11 to 1 × 10^–10 g C ml^–1 h^–1) in winter, probably resulting from lowered rates of primary productivity and dissolved organic matter release as well as reduced riverine allochthonous inputs during the winter drought.     

Seismic model of the lithosphere of the East European Platform beneath the Baltic Sea-Black Sea profile

This paper presents the results of seismic measurements along the Baltic Sea-Black Sea profile. The basic wave groups recorded up to distances of 900 km are characterized. The main elements of a lithospheric model of the southwestern part of the Precambrian East European Platform are given. The thickness of the Earth's crust is about 45 km and the mean velocity of the crust is about 6.3 km/s. At a depth of 65 km, the velocity increases from 8.2 to 8.5 km/s. In the depth interval 110 to 135 km, there is a series of layers with low and high velocities. The lower boundary of the lithosphere is probably defined by the boundary at a depth of 110 km.     

Crustal contamination and fluid/rock interaction in the carbonatites of Fuerteventura (Canary Islands, Spain): a C, O, H isotope study

Fuerteventura—the second largest of the Canary Islands consists of Mesozoic sediments, submarine volcanic rocks, dike swarms and plutons of the Basal Complex, and younger subaerial basaltic and trachytic series. Carbonatites are found in two Basal Complex exposures: the Betancuria Massif in the central part of the island and the Esquinzo area in the north. values of the carbonatites increase progressively from south to north of the island. This phenomenon is attributed to different degrees of assimilation of sedimentary carbonate. Homogeneous, typically magmatic values for carbonatites which have preserved primary igneous textures and minerals suggest a well-mixed reservoir where changes in values result from the storage of carbonate magmas at different structural levels. The magma storage allowed assimilation of sediment to varying degrees before final emplacement of carbonatites. Shifts in towards more positive and negative values from presumed primary compositions are observed in the carbonatites. On the basis of the oxygen isotope compositions of calcite, mica and K-feldspar, and the hydrogen isotope compositions of micas, the changes in the values of the carbonatites can be related to fluid/rock interactions.     

Age and significance of voluminous mafic–ultramafic magmatic events in the Murchison Domain,Yilgarn Craton

Mafic–ultramafic rocks in structurally dismembered layered intrusions comprise approximately 40% by volume of greenstones in the Murchison Domain of the Youanmi Terrane, Yilgarn Craton. Mafic–ultramafic rocks in the Murchison Domain may be divided into five components: (i) the ～2810 Ma Meeline Suite, which includes the large Windimurra Igneous Complex; (ii) the 2800 ± 6 Ma Boodanoo Suite, which includes the Narndee Igneous Complex; (iii) the 2792 ± 5 Ma Little Gap Suite; (iv) the ～2750 Ma Gnanagooragoo Igneous Complex; and (v) the 2735–2710 Ma Yalgowra Suite of layered gabbroic sills. The intrusions are typically layered, tabular bodies of gabbroic rock with ultramafic basal units which, in places, are more than 6 km thick and up to 2500 km² in areal extent. However, these are minimum dimensions as the intrusions have been dismembered by younger deformation. In the Windimurra and Narndee Igneous Complexes, discordant features and geochemical fractionation trends indicate multiple pulses of magma. These pulses produced several megacyclic units, each ～200 m thick. The suites are anhydrous except for the Boodanoo Suite, which contains a large volume of hornblende gabbro. They also host significant vanadium mineralisation, and at least minor Ni–Cu–PGE mineralisation. Collectively, the areal distribution, thickness and volume of mafic–ultramafic magma in these complexes is similar to that in the 2.06 Ga Bushveld Igneous Complex, and represents a major addition of mantle-derived magma to Murchison Domain crust over a 100 Ma period. All suites are demonstrably contemporaneous with packages of high-Mg tholeiitic lavas and/or felsic volcanic rocks in greenstone belts. The distribution, ages and compositions of the earlier mafic–ultramafic rocks are most consistent with genesis in a mantle plume setting.