Synergistic Application of Optical and Radar Data for Archaeological Exploration in the Talakadu Region,Karnataka

Talakadu is a well known historic place situated on bank of the river Cauvery in Mysore district of Karnataka. The place is close to concave side of a prominent meander where large amount of sand has accumulated. It is believed that after construction of a reservoir upstream, sand was exposed to wind action burying the structures of Ganga dynasty and other later kingdoms. A number of buried sites have been identified by archaeological excavations conducted so far. Presently the area forms sand dunes with thick plantation cover. Analysis of RADAR data (fine beam RADARSAT and ENVISAT ASAR) led to identifying a hitherto unknown buried channel through the Old Talakadu town adjoining the excavated archaeological sites. The study suggests that RADAR penetration through the plantation canopy seems to have occurred as observed by comparing with corresponding optical data of LISS-IV. Below the canopy, sand and shrubs on top of the channel (topographically low area) are acting as smooth surface providing dark tone on radar imagery. During field validation GPS was extensively used to navigate through the forest canopy and locate the buried channel, excavated archaeological sites as well as other anomalous patterns. Synergistic application of optical (RESOURCESAT-1 LISS-IV and CARTOSAT-1 & 2) and radar (fine beam RADARSAT and ENVISAT ASAR) data led to identifying remote sensing based guides for archaeological exploration. Integration of known archaeological sites with the identified anomalous patterns was done in GIS environment. This study adds on to the knowledge base of the site and compliments already known information and suggested new areas for further archaeological exploration.     

Effects of lossy compression on remote sensing image classification of forest areas

Lossy compression is being increasingly used in remote sensing; however, its effects on classification have scarcely been studied. This paper studies the implications of JPEG (JPG) and JPEG 2000 (J2K) lossy compression for image classification of forests in Mediterranean areas. Results explore the impact of the compression on the images themselves as well as on the obtained classification. The results indicate that classifications made with previously compressed radiometrically corrected images and topoclimatic variables are not negatively affected by compression, even at quite high compression ratios. Indeed, JPG compression can be applied to images at a compression ratio (CR, ratio between the size of the original file and the size of the compressed file) of 10:1 or even 20:1 (for both JPG and J2K). Nevertheless, the fragmentation of the study area must be taken into account: in less fragmented zones, high CR are possible for both JPG and J2K, but in fragmented zones, JPG is not advisable, and when J2K is used, only a medium CR is recommended (3.33:1 to 5:1). Taking into account that J2K produces fewer artefacts at higher CR, the study not only contributes with optimum CR recommendations, but also found that the J2K compression standard (ISO 15444-1) is better than the JPG (ISO 10918-1) when applied to image classification. Although J2K is computationally more expensive, this is no longer a critical issue with current computer technology.     

Evaluating a thermal image sharpening model over a mixed agricultural landscape in India

Fine spatial resolution (e.g., <300 m) thermal data are needed regularly to characterise the temporal pattern of surface moisture status, water stress, and to forecast agriculture drought and famine. However, current optical sensors do not provide frequent thermal data at a fine spatial resolution. The TsHARP model provides a possibility to generate fine spatial resolution thermal data from coarse spatial resolution (≥1 km) data on the basis of an anticipated inverse linear relationship between the normalised difference vegetation index (NDVI) at fine spatial resolution and land surface temperature at coarse spatial resolution. The current study utilised the TsHARP model over a mixed agricultural landscape in the northern part of India. Five variants of the model were analysed, including the original model, for their efficiency. Those five variants were the global model (original); the resolution-adjusted global model; the piecewise regression model; the stratified model; and the local model. The models were first evaluated using Advanced Space-borne Thermal Emission Reflection Radiometer (ASTER) thermal data (90 m) aggregated to the following spatial resolutions: 180 m, 270 m, 450 m, 630 m, 810 m and 990 m. Although sharpening was undertaken for spatial resolutions from 990 m to 90 m, root mean square error (RMSE) of <2 K could, on average, be achieved only for 990–270 m in the ASTER data. The RMSE of the sharpened images at 270 m, using ASTER data, from the global, resolution-adjusted global, piecewise regression, stratification and local models were 1.91, 1.89, 1.96, 1.91, 1.70 K, respectively. The global model, resolution-adjusted global model and local model yielded higher accuracy, and were applied to sharpen MODIS thermal data (1 km) to the target spatial resolutions. Aggregated ASTER thermal data were considered as a reference at the respective target spatial resolutions to assess the prediction results from MODIS data. The RMSE of the predicted sharpened image from MODIS using the global, resolution-adjusted global and local models at 250 m were 3.08, 2.92 and 1.98 K, respectively. The local model consistently led to more accurate sharpened predictions by comparison to other variants.     

Efficient satellite orbit modelling using pseudo-stochastic parameters

If the force field acting on an artificial Earth satellite is not known a priori with sufficient accuracy to represent its observations on their accuracy level, one may introduce so-called pseudo-stochastic parameters into an orbit determination process, e.g. instantaneous velocity changes at user-defined epochs or piecewise constant accelerations in user-defined adjacent time subintervals or piecewise linear and continuous accelerations in adjacent time subintervals. The procedures, based on standard least-squares, associated with such parameterizations are well established, but they become inefficient (slow) if the number of pseudo-stochastic parameters becomes large. We develop two efficient methods to solve the orbit determination problem in the presence of pseudo-stochastic parameters. The results of the methods are identical to those obtained with conventional least-squares algorithms. The first efficient algorithm also provides the full variance–covariance matrix; the second, even more efficient algorithm, only parts of it.     

Simulation of the Ku-band Radar altimeter sea ice effective scattering surface

A radiative transfer model is used to simulate the sea ice radar altimeter effective scattering surface variability as a function of snow depth and density. Under dry snow conditions without layering these are the primary snow parameters affecting the scattering surface variability. The model is initialized with in situ data collected during the May 2004 GreenIce ice camp in the Lincoln Sea (73/spl deg/W; 85/spl deg/N). Our results show that the snow cover is important for the effective scattering surface depth in sea ice and thus for the range measurement, ice freeboard, and ice thickness estimation.     

Software for validating parameters retrieved from satellite

A PC-based interactive software has been developed and presented here for validating geophysical data retrieved from satellite mounted sensors operating in visible, infrared and microwave frequencies. The program, coded in Visual Basic, is user interactive and runs on Windows-98 or higher platforms. The system prepares the database on a pre-selected Microsoft platform to enhance processing efficiency. Sub-setting option is also provided to reduce the processing time. Data retrieved from ‘Multi-channel Scanning Microwave Radiometer (MSMR) onboard the Indian satellites Oceansat-1 during 1999–2001 were validated using this software as a case study. The program has several added advantages over the conventional method of validation that involves strenuous efforts to incorporate subroutines to meet every minute requirement. Satellite-sea truth relationships on various space-time window combinations are determined and exhibited in matrix form to visualize the nature of correlation. User has the option to visualize the satellite-sea truth relationship through graphical representations before selecting optimum relationship for prediction.     

Remote sensing study of granulitic terrain in parts of Gujarat and Rajasthan

The geology of northwestern part of Indian peninsula is considered to be important due to complete preservation of rocks from Archaean to Upper Proterozoic. Further, these rocks have served as ideal host of varieties of economic minerals. The present work is an attempt to study the structurally deformed granulitic terrain in parts of Gujarat and Rajasthan in light of remote sensing. The study area falls under Sirohi, Banas Kantha and Sabar Kantha districts of Rajasthan and Gujarat. Remote sensing technique is utilized for the understanding of structural geology and deciphering the shear pattern. The methods adopted in this study include generation of False Color Composite (FCC) of satellite data, interpretation of lineaments from FCC and study the drainage pattern, structural basin delineation, profiling, and field mapping. It is observed that the area has undergone extensive deformation. There are two major sets of lineaments interpreted in the granulitic terrain such as WNW-ESE and NE-SW directions. Majority of the WNW-ESE lineaments are brittle in nature and N-S, NE-SW trending lineaments are ductile in nature. Overall the study area bifurcated into seven structural basins comprises of basic granulites, calc granulites and pelitic granulites.     

Evolutionary stages of the karst-anthropogenic system of the Yucatán Peninsula

An analysis is made of the karst geomorphosystems of the Yucatán Peninsula. It is found that the main factors influencing its formation were climate and ocean level oscillations, tectonic movements, and impact effects. It is established that as a result of an active influence of the Maya civilization on the karst landscape of the peninsula, the geomorphosystems was transformed to the karst-anthropogenic system. The karstic landforms, and also the underground caverns experienced the anthropogenic impact, and the subsurface waters were particularly heavily influenced, which, on the one hand, determined the places of concentration of settlements and were actively consumed by the population, and, on the other, their reserves were replenished at regular intervals as a result of the creation of artificial subsurface water storages. In a further transformation of the karst-anthropogenic system, two stages were additionally identified: dominated by natural karstic processes (after the decline of the Maya civilization), and with a renewed intensification of anthropogenic pressure (1980s–current period). The last transformation stage is distinguished by an extension of the impact to the surface karst as well as to the underground caverns: they are subjected to mechanical destruction with an enhancement in the chemical impact as a result of inputs of polluted runoffs to encompass ever deeper horizons of subsurface waters. It is established that the rates of transformation processes of anthropogenic objects created of limestone are, in general, comparable with the mean rates of natural karstic processes on the neighboring territories: the formation of karrens on Maya steles is generally proceeding at the rate of 0.04 mm/year, while the growth rates of flowstones within urban structures of limestone vary from 0.03 to 0.6 mm/year.