Hydrothermally altered hyaloclastites at the Earth’s surface in the rift zone of Iceland: Problem of the biochemogenic accumulation of trace elements

Results of the mineral and chemical study of surface-altered hyaloclastites from the Theistareykir and Nämafjall geothermal zones, the North Iceland rift, are considered. The paper scrutinizes the composition of hydrothermally altered rocks mainly consisting of clay minerals related to the transformation of bedrock hyaloclastites. The clay minerals also make up slope talus or proluvial deltas around highlands. The major clay minerals in areas of the present-day fumarole activity are kaolinite and smectite, while the redeposited talus-proluvial sediments are mainly composed of smectites. The studied rocks contain framboids, globules, rods, and other structures with morphology and size similar to those of mineralized bacteria. The local concentration of Ag in proluvial deposits is attributed to the intense bacterial activity. It is supposed that elevated contents of some trace elements could be related to an intense microbiotic influence.     

Holocene overbank deposition in the drainage basin of Lake Khanka

Overbank deposits in the Komissarovka River valley consist of alternating silt, clay silt, sand, and soils produced by lacustrine, alluvial, and aeolian deposition and by soil formation. Silt and sand layers in the lower part of the section correlate with the events of Early Holocene transgression and Middle Holocene regression of Lake Khanka. Deposition in the lowermost reaches of the Komissarovka River provides a faithful record of local Holocene landscapes controlled by level changes in Lake Khanka.     

Sulfide evolution in high-temperature to ultrahigh-temperature metamorphic rocks from Lützow–Holm Complex, East Antarctica

The high-temperature (HT) to ultrahigh-temperature (UHT) metamorphic rocks from Lützow–Holm Complex, East Antarctica show a systematic difference between sulfide assemblages in the rock matrix and those found as inclusions in the silicates stable in high-temperatures. Matrix sulfides are commonly pyrite with or without pentlandite and chalcopyrite. On the other hand, inclusion sulfides are pyrrhotite with or without pentlandite and chalcopyrite lamellae. When recalculated into integrated single-phase sulfide compositions, inclusion sulfides from the UHT region showed a wider range of solid–solution composition than the inclusion sulfides from the HT region. The host minerals of the sulfides with extreme solid–solution compositions are those stable at the peak of metamorphism such as orthopyroxene and garnet. One of the most extreme ones is included in orthopyroxene coexisting with sillimanite ± quartz, which is the diagnostic mineral assemblage of UHT metamorphism. These observations suggest that sulfide inclusions preserve their peak metamorphic compositions. Pyrrhotite did not revert to pyrite because of the closed system behavior of sulfur in inclusion sulfides. On the other hand, in the rock matrix where the open system behavior of sulfur is permitted, original sulfides were partly to completely altered by the later fluid activity.     

Observation of abnormal thermal and infrasound signals prior to the earthquakes: a study on Bonin Island earthquake M7.8 (May 30, 2015)

Scientists from all over the world try to incorporate multi-disciplinary precursors to forecast the earthquake on a short-term basis. The authors here have analyzed outgoing longwave radiations acquired from polar-orbiting National Oceanic and Atmospheric Adminstration (NOAA) satellites and long-period infrasound waves recorded by the ground observatories in China prior to the recent Bonin Islands, Japan region earthquake which occurred on May 30, 2015 with the magnitude of 7.8. The anomalous outgoing longwave radiation (OLR) was observed on May 15, 2015, and was recorded by “NOAA 18” satellite during its “night pass.” Similarly, an abnormal infrasound spike was recorded at the Beijing station on May 17, 2015. The delay in observing anomalous infrasound waves compared to the OLR anomaly is due to these low-frequency waves traveling at low speed with the velocity range of 10–15 m/s. From the analysis of the results, it can be inferred that there is a substantial relation between parameters like OLR and infrasound waves; hence, the authors conclude that it is possible to forecast the earthquake on a short-term basis with reasonable accuracy.     

The effect of hydrothermal impregnation of Ni,Co, and Cu on HZSM-5 in the nitrogen oxide removal

The selective catalytic reduction (SCR) of nitrogen oxides on M/ZSM-5 (M = Cu, Ni, Co) catalysts was investigated. The catalysts were prepared using hydrothermal impregnation of the metal chlorides and nitrates on ZSM-5. The catalysts were characterized by nitrogen absorption/desorption, X-ray diffraction, Fourier transform infrared (FTIR) spectroscopy, ultraviolet–visible diffusion reflection spectroscopy (UV–Vis DRS), temperature-programmed reduction (TPR), N₂O chemisorption and ammonia temperature-programmed desorption. The performance tests for SCR of NO were carried out in a fixed-bed reactor from 250 to 400 °C. During the impregnation, part of the aluminum was eliminated from the zeolite framework due to the acidity of the metal salt solution and heating process as indicated by the reduction in the intensity of XRD peaks and variations in the positions of the FTIR vibrational bands. The Cu(Cl)/ZSM-5 catalyst exhibited NO conversions over 90% over the entire temperature range. The other catalysts showed comparable activities, but the catalysts prepared with chloride salt precursors demonstrated higher activity than those based on nitrate as the precursor. Moreover, the TPR reduction peaks of the metal ion in catalysts prepared with chloride precursor were lower, and their UV–Vis absorption bands revealed bathochromic transfers with higher intensities. Concurrent with these changes, the activity of the catalyst increased. The TPR profiles indicated that Cu and Ni both had an oxidation number of +2, whereas Co was present in the oxidation number of +2 and +3. The mass transfer limitation analysis showed that for particles in millimeter size range or larger significant intra-particle mass transfer limitation would be expected.     

Extraction and recovery of precious metals from electronic waste printed circuit boards by bioleaching acidophilic fungi

Printed circuit boards contain precious metals. They are produced in large volumes, rendering them an important component of the electronic waste. In view of the heterogeneity of the metals present, reprocessing of electronic waste is a heinous task. The present study focused on leaching of valuable metals from electronic waste printed circuit boards using Aspergillus niger DDNS1. The adaptation phases began at 0.1, 0.5 and 1.0% of fine powder of printed circuit boards with 10% inoculum and were optimized with three effective factors, viz. initial pH, particle size and pulp density, to achieve the maximum simultaneous recovery of the valuable metals. The interactions of these metals were also deciphered using scanning electron microscopy, energy-dispersive X-ray spectroscopy, X-ray diffraction, Fourier transform infrared spectrum and atomic absorption spectroscopy. The results indicated that extraction of the precious metals was accomplished mainly through the unique organic acids originating from A. niger DDNS1. The initial pH played an important role in the extraction of the precious metals and the metals precipitate formation. The leaching rate of the metals was generally higher at low powder dosage of printed circuit boards. The toxicity of the printed circuit boards had little effect on two-step bioleaching at the pulp density of 0.1% compared to one-step bioleaching. The two-step bioleaching process was followed under organic acid-forming conditions for the maximum mobilization of metals. Thus, the precious metals from printed circuit boards could be mobilized through fungal bioleaching which promises an important industrial application in recycling of electronic wastes.     

Enhanced bioremoval of refractory compounds from dyeing wastewater using optimized sequential anaerobic/aerobic process

The upflow anaerobic sludge blanket process followed by the biological aerated filter process was employed to improve the removal of color and recalcitrant compounds from real dyeing wastewater. The highest removal efficiency for color was observed in the anaerobic process, at 8-h hydraulic retention time, seeded with the sludge granule. In the subsequent aerobic process packed with the microbe-immobilized polyethylene glycol media, the removal efficiency for chemical oxygen demand increased significantly to 75 %, regardless of the empty bed contact time. The average influent non-biodegradable soluble chemical oxygen demand was 517 mg/L, and the average concentration in effluent from the anaerobic reactor was 363 mg/L, suggesting the removal of some recalcitrant matters together with the degradable ones. The average non-biodegradable soluble chemical oxygen demand in effluent from the aerobic reactor was 87, 93, and 118 mg/L, with the removal efficiency of 76, 74, and 67 %, at 24-, 12-, and 8-h empty bed contact time, respectively. The combined anaerobic sludge blanket and aerobic cell-entrapped process was effective to remove the refractory compounds from real dyeing wastewater as well as in reducing organic loading to meet the effluent discharge limits. This integrated process is considered an effective and economical treatment technology for dyeing wastewater.     

The Timescales of Magma Mixing in the Plumbing System of Bezymianny Volcano (Kamchatka): Insights from Diffusion Chronometry

Intrusion of magma of contrasting composition into a magma chamber often triggers eruptions of arc volcanoes. Application of the diffusion chronometry method allowed us to determine the time when fresh magma was supplied to the shallow chamber of Bezymianny volcano in the case of six eruptions in 2006–2012 and to compare them to the recorded seismic activity of this volcano. Two types of eruptions of Bezymianny volcano were distinguished, with a contrasting orthopyroxene rim being formed in the respective magmas (a) up to 3 years and (b) up to 2 months before the beginning of an eruption. It was shown that these differences are caused by two different paths of magma supply to the shallow chamber of Bezymianny volcano.     

Caledonian high-pressure metamorphism in the Strona-Ceneri Zone (Southern Alps of southern Switzerland and northern Italy)

The Strona-Ceneri Zone comprises a succession of polymetamorphic, pre-Alpidic basement rocks including ortho- and paragneisses, metasedimentary schists, amphibolites, and eclogites. The rock pile represents a Late Proterozoic or Palaeozoic subduction accretion complex that was intruded by Ordovician granitoids. Eclogites, which occur as lenses within the ortho-paragneiss succession and as xenoliths within the granitoids record a subduction related high-pressure event (D1) with peak metamorphic conditions of 710 ± 30 °C at 21.0 ± 2.5 kbar. After isothermal uplift, the eclogites experienced a Barrowtype (D2) tectonometamorphic overprint under amphibolite facies conditions (570-630 °C, 7-9 kbar). U-Pb dating on zircon of the eclogites gives a metamorphic age of 457 ± 5 Ma, and syn-eclogite facies rutile gives a ²⁰⁶Pb/²³⁸U age of 443 ± 19 Ma classifying the subduction as a Caledonian event. These data show that the main tectonometamorphic evolution of the Strona-Ceneri Zone most probably took place in a convergent margin scenario, in which accretion, eclogitization of MOR-basalt, polyphase (D1 and D2) deformation, anatexis and magmatism all occurred during the Ordovician. Caledonian high-pressure metamorphism, subsequent magmatism and Barrow-type metamorphism are believed to be related to subduction and collision within the northern margin of Gondwana. Editorial handling: Edwin Gnos     

Fluid and melt inclusion evidence for the origin of idiomorphic quartz crystals in topaz-bearing granite from the Salmi batholith, Karelia, Russia

Idiomorphic quartz crystals in topaz-bearing granite from the Salmi batholith contain primary inclusions of silicate melt and abundant mostly secondary aqueous fluid inclusions. Microthermometric measurements on melt inclusions give estimates for the granite solidus and liquidus of 640–680°C and 770–830°C, respectively. Using published solubility models for H₂O in granitic melts and the obtained solidus/liquidus temperatures from melt inclusions, the initial water concentration of the magma is deduced to have been approximately 3 wt.% and the minimum pressure about 2 kbar. At this initial stage, volatile-undersaturation conditions of magma were assumed. These results indicate that the idiomorphic quartz crystals are magmatic in origin and thus real phenocrysts. During subsolidus cooling and fracturing of the granite, several generations of aqueous fluid inclusions were trapped into the quartz phenocrysts. The H₂O inclusions have salinities and densities of 1–41 wt.% NaCl eq. and 0.53–1.18 g/cm³, respectively.